GENERAL

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately.

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel, including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate), complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402), for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Providing HYSD bars (Fe-415) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work BLD-CSTN 10-25 P No 71

Flooring with Telephone Black Granite 16 to 18 mm thick up to 8'-00 (2.43 M) set over a base coat of CM (1:8) prop 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm and jointed neately with white cement paste mixed with pigment of matching shade to full depth of granite, including cost and conveyance of all materials, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer-in-charge, cost of overheads & contractors profit etc., complete for finished item of work. (APSS No 701 & 707)

Providing Cladding with Telephone Black Granite 16 to 18 mm thick set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Stone tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS.13712, IS.13630 (Parts 1 to 15) of any colour and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistancy spread @ 3.3 Kgs per sqm & jointed with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand, water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-charge, fixed to wall surface set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.

Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-V.10

Manufacture, supply, delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections and MS Flat, MS Square Bars etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding, finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints - Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Design & Installation of FRP Material (ISO High Grade FRP material), FRP

Design & Installation of Made in MS scrap, with epoxy paint primer, with

Transportation of Sculpture / Art installation

Supply and Installation of Lamp Type - LED - Red, Green, Amber, Power Consumption for entire pole, complete with all accessories, controller, wiring etc.

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - R.C.C. work, including all sundries, all incidental and operational charges, and all labour charges etc. complete for finished item of work or as directed by the Engineer-in-Charge.

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel, including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate), complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402), for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

RCC Wall-200 mm Thick

Providing HYSD bars (Fe-415) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.

Plastering in CM (1:3) Prop, 20mm thick using OPC grade cement including cost and conveyance of all materials, labour charges, curing complete etc.

Flooring with Telephone Black Granite 16 to 18 mm thick up to 8'-00 (2.43 M) set over a base coat of CM (1:8) prop 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm and jointed neately with white cement paste mixed with pigment of matching shade to full depth of granite, including cost and conveyance of all materials, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer-in-charge, cost of overheads & contractors profit etc., complete for finished item of work. (APSS No 701 & 707)

Supply and delivery of hard granite stone of size 0.15 x 0.30 with 60 mm thickness including cutting and fixing it to the face of the divider wall with set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with full depth, including cost of all materials like stones, cement, sand and water and incidental charges etc., complete for finished item of work as directed by the Engineer-in-charge of work etc., complete for finished item of work. (APSS No.701 &707) (R&B Pulivendula approved data 2020-21 SSR)

Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-V.10

Pipes Work: Supply of CPVC pipe conforming to IS::9001:2015; Suitable for the respective working pressures without all fittings & accessories like Ts, Couplings, Bends, Reducers, screwed adapters, flanged tailpieces etc.

CPVC PIPE SIZE 63MM

CPVC ball valve with fittings

Supply and Installation of ms Ring Fountain 63mm with Nozzles

Supply and Installation of Open Well Submersible Pump (3HP) with Starter

Supply and Installation of warm white light mode with Transformer

Installation and supervision and transports charges

Supply, fabrication, transportation and erection of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3, complete with feeder pillar box, foundation and earthwork as per specification.

Supply, transportation and erection of 200w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated, IP66, IK05, driver surge protection 4KV, complies to IS 10322, complete.

Supply and fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120-270 V AC. P.F>0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3). Driver surge protection 4KV, external Surge protection ≥ 5KV with optics istribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K-5700K, minimum CRI>70, etc.. complete a) LUMINAIRE MAKE: WIPRO / PHILIPS (GREEN LINE) /Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE/VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) HALONIX (LUMOS SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE PHILIPS LUMILEDS / CREE / NICHIA OSRAM/SAMSUNG/LG

Supply, transportation and erection of 60w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated, IP66, complies to IS 10322, complete.

Supply, transportation and Installation of Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser. Makes: Bajaj / Crompton/Surya/VIN/Havells/Green Lights Insta Power.

Supply, transportation and Installation of SPIKE LIGHTS Equivalent to HAVELLS LYCUS SPIKE LIGHT 9-WATT 3000K Makes: Bajaj / Crompton/Surya/VIN/Havells / Green Lights /Insta Power.

Supply, transportation and Installation of UNDER WATER LIGHTS - Equivalent to Havells Cool White Waterproof LED Light, For Swimming Pool

Supply, transportation and Installation of 5W FOOT LIGHTS Equivalent to Havells Led Ecstatic SL SQ 5 W 3000 K Anthracite Each Makes: Bajaj // Crompton/Surya/VIN/Havells / Green Lights /Insta Power.

Supply, transportation and Installation of 5W STRIP LIGHTS - Equivalent to Havells Led Ecstatic SL SQ 5 W 3000 K Anthracite

Weather proof Junction box - Supply, fabrication, installation of Weather proof Junction box with suitable terminals, MCB, connections as per site conditions

FEEDER PILLAR PANEL - Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears, complete with incomers and outgoers as specified.

Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I) 1554-1, including laying in existing cable trench as per specifications etc complete as required.

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

3 Core 2.5 Sqmm Copper cable

Supply and making end termination with heavy Aluminum lugs (pin/ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size.

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

3 Core 2.5 Sqmm Copper cable

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mm x 400mm x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply, erection, testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

Supply, erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating, installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply, laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) etc including labour charges etc complete as required.

300mm dia NP2 RCC Hume pipe

150mm dia NP2 RCC Hume pipe

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excacvation including all soils for trench

Clearing the Medium and Dense Shrub /Besharam Rubber plants uprooting wild vegetation, grass, bushes, saplings and disposal of unserviceable materials and stacking of serviceable material including removal, disposal and overheads & contractors profit complete for finished item of work - entire site

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm (6") thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats/rolls, complete for finished item of work excluding cost of grass, fertilizers and chemicals etc.

For Korean grass

Hedge/shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., complete for item of work, but excluding the cost of the fertilizers and plant material etc. (*10 No./Sqm of plants spacing as per design)

Shrub/Hedge planting in 0.30 m trench with 0.3 m spacing

Hedge/shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., complete for item of work, but excluding the cost of the fertilizers and plant material etc. (*6 No./Sqm of plants spacing as per design)

Shrub / Hedge planting in 0.3 m trench with 0.45 m spacing

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals, internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals)

Digging of 0.45x0.45x0.45 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals, internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals)

Maintenance of lawns: Watering 10 to 15 ltrs per Sqmt per day basing on season and weather conditions (30 watering required in a month to maintain sub-soil moisture continuously), application of fertilizers, insecticides, Fungicides (once in a month) by manual excluding cost of fertilizers & water.

Maintenance of lawn

Maintenance of Shrub

Maintenance of Palms/Tree planting: watering (once in three days @ 5 Lts/per plant shall be provided to maintain sub soil moisture continuously) by manually, but excluding cost of water including all operational, incidental, labour charges for complete of work.

Watering of trees or palms

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of specified bag sizes, sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation, supplied after proper hardening off, complete for finished item of work.

Lawn - For Korean grass

Shrub/Hedge planting 0.30m trench 0.3m spacing - durantha red (8"x10")

Shrub/Hedge planting 0.30m trench 0.3m spacing - buxus microphylla (8"x10")

Shrub/Hedge planting 0.30m trench 0.3m spacing - durantha gold (8"x10")

Shrub/Hedge planting 0.30m trench 0.3m spacing - golden pandana (8"x10")

Shrub/Hedge planting 0.3m trench 0.45m spacing - snow bush (13"x13")

Shrub/Hedge planting 0.3m trench 0.45m spacing - hymenocallis (13"x13")

Shrub/Hedge planting 0.3m trench 0.45m spacing - Helicona flower plant (13"x13")

Shrub/Hedge planting 0.3m trench 0.45m spacing - ixora-dwarf (13"x13")

Shrub/Hedge planting 0.3m trench 0.45m spacing - canna-variegated (13"x13")

Palms/Tree - Ficus-Multi-Head (18"x18")

Palms/Tree - round wood plant (18"x18")

Palms/Tree - Royal-Bottle-Palm (21"x21")

Palms/Tree - terminalia mantaly (21"x21")

Transportation of Lawn from kadiyum to guntur (actual payment subject to approval of rates by competent authority)

Transportation of Bag plants from kadiyum to guntur (actual payment subject to approval of rates by competent authority)

Cost of Fertilisers & Pesticides and unforeseen items

Provision for replacing and replacement of existing statues

Provision for shifting utilities

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item