REPAIR REPLACEMENT TO FLOOR JOINERY WALLS TILES SANITARY WATER SUPPLY FITTING AND ALLIED WORKS IN ZONE VII UNDER THE AREA OF AGE BR I AT GE WEST BAREILLY

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but n.exc 4.0 sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed.

Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm preminated PVC sheet reinforced with mild steel square tube & edges will be painted to match with printed sheets complete all as specified and directed.

S & F factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20 mm width stuck inside with solvent cement for style and prelaminated PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails. Paneling of prelaminated PVC sheet both sides to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S & F 150 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed.

S & F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled stainless steel Butt hinges with steel screwscomplete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 32 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with mitred beads for securing glass, gauze etc as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S & F 30 mm thick second class hard wood glazed or skeleton shutters, open rebated, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers for securing glass, gauze etc., provided with stiles and rails for window and ventilator shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confiRMing to Fe 410-O 0r Fe 310-O complete all as specified and directed.

M & L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) for embedding of holdfast complete all as specified and directed.

S & F 0.56 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings of door shutter complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm complete all as specified and directed.

S & F 300 mm long ordinary rat tail pattern springs including roller and roller plate complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed.

S & F 100mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed.

Supply and fix mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed.

S & F 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F 100 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repairs Galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M & L brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar including demolition of existing defective brickwork complete all specified and directed.

S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.( Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S&F factory made PVC cupboard flush type shutter (to form double leaf door) of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.( Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S&F factory made PVC shelf/ Partition of required size consisting of panel of 18mm thick Celuka PVC ply and for supporting the hold of shelf/ Partition and shall provided 3 edges in size 18mm x 18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc including dismantling of existing partition/shelf of any description etc complete as per direction of Engr-in-Charge.( Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S&F PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS Screws through the grrove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A strip of 5mm thick PVC sheet of width 75mm featherd at edges shall be stuck at the places where two panels are joined, using solvent cement Complete as per direction of Engr-in-Charge.( Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S&F Harrison rails, mild steel, chromium plated with fixing with PVC brackets stops rollers etc all as specified and as directed.

S&F 100mm long aluminium powder coated barrel tower bolts of extruded section complete all as specified and directed.

S&F powder coated aluminium alloy handles cast type, anodised of 125mm size, complete all as directed.

S&F 100mm hasp and staple, powder coated aluminium including bolt to hinge plate and fixed with screws complete all as directed.

S & F 4mm thick E- Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/suppoting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

M & L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid on floor surface jointed and pointed with coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 for including dismentling existing tiles with bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 for including dismentling existing tiles with bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting jointed and pointed with coloured cement over and including 10 mm thick rendering in cement mortar 1:4 for including dismentling existing tiles with bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300x200 mm jointed and pointed with coloured cement over and including 10 mm thick screed bed in cement mortar 1:4 for including dismentling existing tiles with bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for colour printed glazed ceramic coloured tiles in vertical surface (300/350) x 450 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering or bedding layer of CM(1:4) and dismantling of wall tile including cement mortar bedding complete all as specified or as directed

M & L for 15 to 17 mm thick pre polished Udaipur green stone slab on floor or in platform set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed in CM 1:6 including making hole 25 mm dia for gas pipe if required and moulding edges on platform including dismentling existing tiles/stone work with bedding complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on wall/ceiling including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

M & L for rendering 10 mm thick rendering in CM 1:3 on ceiling finished even and fair complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preperation of new wall surfaces and applying two coats of distemper oil emulsion over a coat of primer after applying Birla / JK wall care putty complete all as specified and directed.

S & F rubber moulded coloured Chequered cement concrete tiles 30 cm x 30 cm x 20-25 mm thick, bedded over and including screed bed 20cm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white cement slurry with pigment including demolition of old existing stone slab of any description or thickness in floor, aprons etc complete all as specified and directed.

M & L for 75 mm thick cement concrete, type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring finished rough to receive finishes including demolition of old concrete in floor complete all as specified and directed.

M & L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 20 mm graded granite stone aggregate) as in flooring/plinth including demolition of old concrete in floor complete all as specified and directed.

Dismantling timber scantling 40sqcm and over in section, in any position framed sections (roof trusses) complete all as specified and directed.

M & L for second class hard wood clean sawn in scantling fixed to framed structures complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified.

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J or L hook complete all as specified and directed.

S & F in repairs 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, vally gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

S & F rolled mild steel Gde Fe 290 (Gde E-165) as in joist, channel, angle, or tee sections, fixed independantly with MS plates/gusset plates, cleats, hold fast etc including fixing (except provision there of) of hinges by welding complete all as specified and directed.

S & F rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates complete all as specified and directed by Engineer-in-charge.

S & F of pre-painted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick wave tile pattern of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts complete all as specified and directed.

S & F of pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering / cladding to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts complete all as specified and directed.

S & F Stainless Steel curtain rods 32 mm dia with bracket and ends etc fixed in repair complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S & F in repairs soap dish, brass chromium plated fixed to wall complete all as specified and directed.

S & F in repairs brass chromium plated towel rail 60 cm long fixed to wall etc complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in PCC or CM not exceeding 10 cm girth complete all as specified and directed.

S & F in replacement 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 15 mm bore fancy pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 630x450 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed.

S & F in repairs Vitreous China EWC Pedastal pattern white, including mild steel chromium plated or aluminised hinging device seat cover white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed.

S & F in repairs PVC connection for 15mm size pipe 450 mm long with PTMT nuts complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin coloured, flat back, size 550x400mm including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and fixed on a pair of CI cantilever bracket of appropriate size complete all as specified and directed.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints laid in floors or trenches including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints laid in floors or trenches including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes, rain water pipes, drainage pipes single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unsv water tank capacity exc 250 but n exc. 500 litre complete all as specified in SSR Part I.

S & F Ball valves 15 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed.

S & F 1000 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unsv water tank capacity exc 500 but not exc. 1000 litres complete all as specified in SSR Part I.

S & F Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S & F in repairs 125 mm dia circular grating stainless steel chromium plated fixed on trap loose or with CM 1:3 complete all as specified and directed.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course including demolition of cement concrete all as specified and directed.

M & L for 15mm thick rendering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 100ml per 50 Kg of cement complete all as specified and directed. (WPC measured and paid seperately)

Supply only liquid water proofing compound.

Providing water proofing treatment to accessible/non accessible RCC roof slabs with Atactic Polypropylene modified polymeric membrane as specified and described as under: - (a) Applying one coat of blown type bitumen of grade 85/25 heated to a working temperature of 180 degree centigrade and applied @ 1.2 kg per square meter of the surface area over a coat of bitumen primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacurer's instructions complete all as specified and directed (b) Supply and providing APP modified polymeric membrane having following physical and chemical parameters: - (i) Centre core - 100 Micron HMHPDE (ii) Film - 20 Micron HMHPDE (iii) Thickness - 2.00 mm (iv) Weight - 3.00 Kg/Sqm NOTE:- Laying shall be done all as per manufacture's instruction and all as specified in clauses 11.43 of MES SSR-2009 Specifications. (PCC tiles over screed shall be provided over the APP Modified Poymeric membrane or alumnium paint which shall be measured and paid separately against the respective item). (Make of APP Membrane: IWL India Limidted Hyperplas, Pidilite Industries Ltd & The Structural Water Proofing Co Pvt Ltd).

M & L for cement concrete tiles of size 250 X 250 X 22mm thick machine pressed with grey cement and pigment set and jointed filled with sealing compound over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for applying one coat of aluminium paint over APP membrane complete all as specified and directed

Notes :

SHRI BALA JI STORE

Goel Enterprises

RIYASAT ALI KHAN

novell engineers

REHAN CONSTRUCTION

M/S Alam Construction Co

Mohit Enterprises

N N ENTERPRISES

SIDDHIDATI CONSTRUCTION

hardeep singh enterprises