COMPREHENSIVE REPAIR MAINT AND ATTENDING DAY TO DAY COMPLAINTS OF EXTERNAL WATER SUPPLY AT SECTOR C1 AND C2 UNDER GE UTILITY AMBALA

Amount

Attending day to day complaints lodge in complaint register or ARMAAN app of interrupted/breakdown of external water supply and repair to make the continuity of external water supply after detecting & rectifying the defect such as replacement of nipple, tee,union,socket or blockage in any pipe from 15mm to 25 mm size and other minor items such as required in order to make good the continuity of water supply to the entire satisfaction of Engineer-in-Charge. Note:- (a) This item pertains to attending complaints of external water supply such as T&P and safety tools will be the responsibility of contractor as required in order to attend the complaint to the entire satisfaction of user/Engineer-in-Charge. (b) Rs. 100/- per day will be recover from contractor payment if fail to rectify complaints. Necessary exacavation /digging wherever required for the rectification of complaint will be done by the contractor and no extra amount will be paid seperately.

Attending day to day complaints lodge in complaint register or on ARMAAN app of interrupted/breakdown of external water supply and repair to make the continuity of external water supply after detecting & rectifying the defect such as replacement of nipple, tee, union, socket or blockage in any pipe from 40 mm to 80 mm size and other minor items such as required in order to make good the continuity of water supply to the entire satisfaction of Engineer-in-Charge. Note:- (a) This item pertains to attending complaints of external water supply such as T&P and safety tools will be the responsibility of contractor etc as required in order to attend the complaint to the entire satisfaction of user/Engineer-in-charge. (b) Rs. 100/- per day will be recover from contractor payment if fail to rectify complaints. Necessary exacavation /digging wherever required for the rectification of complaint will be done by the contractor and no extra amount will be paid seperately.

Note for Ser Item No 1.00 & 2.00 :- (i) Fittings such as union, elbow, nipple, socket, reducers, tee and dead plug required for rectification of complaint will be measured and paid under Ser Item No 3.00. (ii) Seperate Plumber and helper will be provided for each sector (Sector 'C1' and Sector 'C2') water supply complaints , provided with required T & P and cost of the same is included in the quoted rate and no extra amount will be paid seperately and if Seperate Plumber and helper is not provided for resolving each sector water supply complaints then contractor will have to pay penalty of Rs 100/- per complaint per day and same will be deducted from rest dues.

Supply only the following sizes of GI specials to be fixed in repair in existing / relaying GI tubing where required for making serviceable of the line complete all as specified and directed : -

GI union15mm

GI union 20mm

GI union 25mm

GI union 40 mm

GI union 50 mm

GI union 80 mm

GI elbow 15mm

GI elbow 20mm

GI elbow 25mm

GI elbow 40 mm

GI elbow 50 mm

GI elbow 80 mm

GI nipple 6" long 15mm

GI nipple 6" long 20mm

GI nipple 6" long 25mm

GI nipple 6" long 40mm

GI socket 15mm

GI socket 20mm

GI socket 25mm

GI socket 40mm

GI socket 50mm

GI socket 80mm

GI reducer of size 50/40mm

GI reducer of size 40/25mm

GI reducer of size 25/20mm

GI TEE of size 50x50x40mm

GI TEE of size 80x80x50mm

GI TEE of size 40x40x25mm

GI TEE of size 25x25x20mm

GI dead plug size 25mm

GI dead plug size 20mm

GI dead plug size 15mm

MS flange with nut bolts of size 80mm

Supply & fixing gun metal gate valves 15 mm with iron wheel head screwed both ends for GI pipe of the following dia of pipe including taking down old unserviceable complete all as specified and directed.

Supply & fixing gun metal gate valves 20 mm with iron wheel head screwed both ends for GI pipe of the following dia of pipe including taking down old unserviceable complete all as specified and directed.

Supply & fixing gun metal gate valves 25 mm with iron wheel head screwed both ends for GI pipe of the following dia of pipe including taking down old unserviceable complete all as specified and directed.

Supply & fixing gun metal gate valves 40 mm with iron wheel head screwed both ends for GI pipe of the following dia of pipe including taking down old unserviceable complete all as specified and directed.

Supply & fixing gun metal gate valves 50 mm with iron wheel head screwed both ends for GI pipe of the following dia of pipe including taking down old unserviceable complete all as specified and directed.

Supply, laying and testing 80 mm GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

Supply, laying and testing 50 mm GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

Supply, laying and testing 40 mm GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

Supply, laying and testing 25 mm GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

Supply, laying and testing 20 mm GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

Supply, laying and testing 15 mm GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

Supply and fix PVC float valve 20 mm dia high pressure with polythene float and fly nuts complete screwed for GI pipe including taking down old U/s valve complete all as specified and directed.

Supply and fixing ductile iron/cast iron fitting for spigot and socket /flanged pipe such as bends (any type radius and angle) tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross collers , caps and plugs upto 150 mm bore complete all as specified and directed.

Supply and fix Cast iron sluice valve 80 mm dia, flanged ends, stem (spindle) of SS (forged) and check nut of gun Metal, PN rating 1.6, working parts conforming to IS :14846, and flanged ends having drilling as per IS:1538 including taking down old unserviceable sluice valve complete all as specified and directed.

Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed.

Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Repacking / repair stuffing box of sluice valve spindle with suitable size gland of make champion / turner including taking apart and reassembling of size 80 to 300mm bore size complete all as specified and directed.

Taking out sluice valves refacing, regrinding and refixing including replacing spindle and check nut and make serviceable of size 80 to 300mm bore size complete all as specified and directed.

Material & labour for repairing to existing CI/DI/GI pipe line, leakage by caulking of lead joint or any other means like fixing a D-Joint or clamp with rubber sheet at the place of leaking joints in running water pipe line including necessary excavation and material complete all as specified and directed. Note:- For 200mm/ 150mm/ 100mm/ 80mm bore CI/DI/GI pipe, fitting such as clamps, nut bolts, D-Joint or any other fittings if required will be provided by the contractor and its cost is included in the quoted item rate.

Scraping old existing paint from pipes of different sizes or any other surfaces including making smooth surface and applying two coat of synthetic enamel paint of existing/approved colour over a coat of red oxide primer complete all as specified and directed.

Material and labour for cement concrete1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored (except grey color), interlocking designer paver blocks in Milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50mtr but not exceeding 250mtr, including demolation of existing paver blocks and earth work is also includes in this item rate complete all as specified and directed.

Material and labour for cement concrete 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and directed.

Material and labour for sand cushioning 25mm compacted complete all as specified and directed.

Note:- Amount of credit of Rs. 103830.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

Krishna builders (BID ID -3343480)

RAJINDER KUMAR AND ASSOCIATES (BID ID -3341854)

M/S HARCHARAN SINGH (BID ID -3340115)