SPL REPAIR TO BLDG NO. T-2, NEW MARKET (POW) AT 514 ASC BN AND BK-03 AND BK-04 (CAMP 23/5) OF 14 INF DIV PRO UNIT UNDER GE CLEMENT TOWN, DEHRADUN

Amount

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, ridge etc fixed with self tapping screws including Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified & directed.

M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 including, Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Machine cut Kota stone slab flooring 16-20 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing complete, all as specified.

M&L for Kota stone slab 16-20 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L pre-polished Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed

Supply & fixing false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, including, Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

M&L for GI snap grid framework including 4mm thick Designer oceanic boards (Non asbestos) for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces duly powder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c. Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c. Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c. To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheet of length 600mm is placed inside the module of size 1200x600mm including suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

M&L for brick work except bricks sub class B old size bricks straight or curved plan exc 6m mean radius built in cm 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 including demolition of brick work complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path/hard standing etc laid in panels, finish the top surfaces even and smooth complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper including a coat of primer of approved tint over a coat of wall care putty complete all as specified and directed

M&L for applying two coat of internal acrylic distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as directed by Engineer-in-charge

M&L for complete removal of old surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as directed by Engineer-in-charge

M&L for applying two coats of acrylic exterior emulsion paint (Apex) over a coat of primer after preparation of newly plastered/concrete surfaces on wall complete all as specified

M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment including preparation of old plastered/concrete surfaces on wall complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

S&f factory made single extruded WPC (wood polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K valve 58-60 (Suspension Grade ) , calcium carbonate and natural fibers (wood powder/rice husk, wheat husk ) and non toxic additives (maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer-in-Charge.

S&F 35 mm thick factory made wire mesh solid WPC Prelaminated both side door shutter consisting of Density 650 kg/cum manufactured by an ISO 9001-2015 certified company . Door to be panelled with SS mosquito Mesh and XTN aluminium mesh for additional strength and safety purpose (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos MS powder coated butt hinges size 100x 25x2mm and 32 mm long steel screw drilled suitable to pass through both the walls of the MS tube. Other hardware should be fixed with 19x 6 mm size steel screws etc complete all as per directions of Engr-in-Charge, manufacturer's specification and drawing complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed

S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x 25mm. Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flat beading for provision of guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, equivalent stay, handles 2 nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.36mm dia of wire and 1.40mm aperture. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm around except runner portion complete all as specified and directed.

S&F in repair rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed

S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate

S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled

S&F 200mm long stainless steel barrel tower bolts all as specified

S&F 150mm size stainless steel handles all as specified

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M&L 110mm dia PVC pipe soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

M&L 75mm dia PVC soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

S&F 75 mm floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC cowls 75mm complete all as specified and directed.

S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified

S&F in repair stainless steel kitchen plate rack of over all size 780 x 600 x 250mm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed.

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified

S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified.

S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified.

S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified

S&F in repair chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified

S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed.

S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed.

S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete including Taking up or down 15 mm dia steel tubing and connections including cleaning for re-fixing or removal from sitein all respect as specified

S & F in repair 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface including Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from sitecomplete in all respect as specified

S&F in repair 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 over 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed

S&F 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed

S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws all as specified and as directed

S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position all as specified

S & F D-type cabinet handles premium quality, stainless steel 304 / gloss chrome / SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or hollow section ,other section with gusset plates, rails, braces, etc, complete, drilled for fixing of sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing comp in manhole cover frames conforming to Fe 410-W (Gde-E-250) quality 'A' including dismantling of wrought iron complete all as specified and as directed

M&L for applying two coat of synthetic enamel paint on new steel surfaces inc primer of any description over 10cm width or girth not otherwise described and complete all as specified and directed by Engr-in-Charge

M&L for sub-main wiring (surface) with two single core 6 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 20 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , 2 years warranty ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed.

S & F Switch Modular bell push single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing door bell ding dong type suitable for 230 Volts, AC, 230 Volts, single pole.

Supply and fixing single pole and neutral enclosure with a two pole and earth plug socket complete with one, single pole MCB 20 Amps 10 KA repturing capacity 240 Volts AC all as specified.

S & F decorative type Glanze Wall light inclding 7/9 watt LED (B22) with all necessary fittings complete all as specifed and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 volts, 50 Hz, 1200 RPM, copper winding of sweep 250 mm complete all as specified and directed.

Taking down unserviceable Ceiling fan ,dismantling blades and removing fan & blades and deposited to MES E/M Store yard

S& F Ceiling fan complete with copper winding ,blades ,down rodss,electronic regulastor and accessories 230 v0lt,1200mm sweep,min delivery 210 CFM wuth service value 6.00 BEE. Five star rated with BLDC

Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pedants, regulators, sockets, light fitting etc.. and making good the disturbed surfaces of walls/ floor etc matching with the existing surface all as specified and as directed by EIC.

Disconnecting the electrification and taking down DBs (any type of SPN/TPN DBs) and making good to the disturbed surfaces to match the existing surface all as specified and as directed by EIC. Note - Temporary power supply shall be provided by contractor.

Taking down U/S submain wiring aluminium etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface.

M&L for sub-main wiring (surface) with two single core 4 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 20 mm dia non-metallic PVC conduit fixed in wall including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including surface rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases , making surface good etc along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories complete all as specified & directed for the following:- (a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp.

All as per Item No 89 above but on the same board with other switches/sockets

All as per Item No 89 above but for One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, 01-way modular type switch single pole 5/6 Amps.

All as per Item No. 89 above but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board all as specified and as directed by EIC.

S& F in repair wall mounted LED batten Box type fitting Blu colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LT 8-16 with & including LED T8 tubular lamp complete all as specified and directed.

S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection complete all as specified and directed.

S & F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings complete including fixing of 9/10 watt LED bulb all as specified.

Supply and fixing step socket type modular fan regulator 120/280 V , 100 Watt all as specified and as directed.

Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz all as specified and directed by Engr- in-charge.

S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz all as specified and directed by Engr- in-charge.

Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.

S& F double door sheet metal enclosure for DB , 08 way , SPN, with 100 Amps rated bus bar , 240 Volts suitable for housing MCBs and flushed inside the wall and making good for disturbed surface with existing etc complete all as specified & directed.

S & F MCBs SPN 32 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCB SP, 6 to 32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCBs SPN 40 -63 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable existing service/UG cable all as specified and as directed .

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers etc and testing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Supply and fixing LED street light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size bracket for fixing all as specified & as directed.

Taking down ceiling fan from existing building and again refixing the same ceiling fan after oiling / greasing complete, connecting up including provision of cable flexible 3 core of suitable size wire from ceiling rose to connect fan.

Supply and fixing sheet metal enclosure double door type for MCBs DB TPN 415V AC 4 way with 200 Amps rated bus bar all as specified and directed .

Supply and fixing MCB TPN 63 Amp 240 V AC 10 KA repturing capacity all as specified.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

RADHA ENTERPRISES (BID ID -3323750)