SPECIAL REPAIRS TO BLDG NO T-28, T-194/B, T-197/B, T-9/DC, T-15/BD, T-63/D, T-82/D, T-127/BD, P-31, T-199, P-10/45, P-10/47 AND P-10/48 URINAL /SENTARY ANNEXE/TOILET/BTH AND BLOCK OF WC/LATRINES OF JRC UNDER AGE B/R- II OF GE (WEST) BAREILLY.

M & L for non- skid ceremic coloured tiles 7mm to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including dismantling of existing tiles over and including M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified.

M&L for Glazed (plain /coloured) ceramic tiles wall 600mmx300mmx7mm thick on vertical faces of walls over and including M&L for 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match over and including taking down old dado/skirting complete all as specified.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F for 100mm long stainless steel butt hinges complete all as specified and directed.

S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed.

S&F for 150mm long aluminum handles, cast type complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast -aluminium alloy and fixed all as spd and directed.