Development of Bal Park in M.C. Paonta Sahib, Ward No. 08, Distt. Sirmour H.P.

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock (Code No. 2.9) Page No.65

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth leve 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) (Code No. 4.1.8) Page No.73

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (Code No. 6.1.2) Page No.94

Brick work with common burnt clay (modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6

Providing form work with steel plate 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttring, and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 mtrs. and removal of the same for insitu-reinforcement concrete & plain concrete a) Foundations, footings, bases of columns, etc. for mass concrete (Code No. 5.9.1) Page No.80

Providing form work with steel plate 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttring, and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 mtrs. and removal of the same for insitu-reinforcement concrete & plain concrete b.) Suspended floors, roofs, landings, balconies and access platform (Code No. 5.9.3) Page No.80

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,shuttering, finishing and reinforcement -All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size).Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) (Code No. 5.2.2 ) Page No.79)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (Code No. 5.22) Page No.83

15 mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand). (Code No. 13.2.2) Page No.196)

Finishing walls with Acrylic Smooth exterior paint of required shade.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Cast Iron Decorative Flowers in Ralinig with welded in railing & Gate.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.80 mm thick with zinc coating not less than 275 gm/m

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

rakesh kumar

sham gopal sharma

rakesh

M/S J.K Constrution

MEHRAJ ALI

DHARMENDER VERMA

SANJEEV GUPTA

Nazar Ali

Anil Kumar

Balbir Singh

PRAVESH KUMAR