Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAdmitted-Fee/PreQual/Technical/Finance | ₹3.7 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹4.2 L+₹48,685.95 (13.0%)Admitted-Fee/PreQual/Technical/Finance | ₹4.2 L+₹48,685.95 (13.0%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹4.4 L+₹69,853.31 (18.6%)Admitted-Fee/PreQual/Technical/Finance | ₹4.4 L+₹69,853.31 (18.6%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | A MANOJ L2 | Mithun Viswanath L1 | RAFI. K.P. L3 |
|---|---|---|---|---|---|---|
| 1.00MINI MCF | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.3 | cum | 335.74 ₹435.12 | 297.13 ₹385.08 Lowest | 352.53 ₹456.88 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.3 | cum | 8,620.24 ₹11,171.83 | 7,628.91 ₹9,887.07 Lowest | 9,051.25 ₹11,730.42 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,204.31 | kg | 174.58 ₹2,10,248.79 | 154.5 ₹1,86,066.2 Lowest | 183.31 ₹2,20,762.43 |
| 1.00 | OD139430/2026-2027:Supplying and fixing :Welded steel wire fabric of required width having rectangular meshpainted with two or more coats of enamel paint of approved shade over a coat of primer (Priming and painting to be paid for seperately) | 893.85 | kg | 92.84 ₹82,985.13 | 82.16 ₹73,438.8 Lowest | 97.48 ₹87,132.6 |
| 1.00 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | 8 | no | 171.74 ₹1,373.92 | 151.99 ₹1,215.92 Lowest | 180.33 ₹1,442.64 |
| 1.01 | 9.95.3:Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm | 24 | no | 125.06 ₹3,001.44 | 110.68 ₹2,656.32 Lowest | 131.31 ₹3,151.44 |
| 1.01 | OD139458/2026-2027:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%) thickness. Sheet should have protective guard film of 25mm microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50 DSR) | 73.92 | sqm | 538.49 ₹39,805.18 | 476.56 ₹35,227.32 Lowest | 565.41 ₹41,795.11 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 24 | metre | 527.38 ₹12,657.12 | 466.73 ₹11,201.52 Lowest | 553.75 ₹13,290 |
| 1.01 | OD139431/2026-2027:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications Excluding appropriate priming coat, preparation of surface, etc. complete.
On steel work | 109.76 | sqm | 165.94 ₹18,213.24 | 146.86 ₹16,119.06 Lowest | 174.24 ₹19,124.23 |
Tender Value
₹4.2 L
EMD Value
₹10,583
Closing Date
16 Sept 2026, 6:00 pmClosed
Martin Charles
LID EW Section Payam GP
Payam Gramapanchayath 2026-27 Project No 315/2027-MINI MCF CONSTRUCTION General Civil Work
2026_LSGD_868029_3
01/2026-27/AE/LID EW/PGP
Open Tender
Civil Works - Buildings
Item Rate
180 days
Payam Grama Panchayath
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,583
Yes
18 Sept 2026
8 Sept 2026
18 Sept 2026
8 Sept 2026
16 Sept 2026
8 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MINI MCF | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.3 | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.3 | cum | - | - |
| 1.003 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,204.31 | kg | - | - |
| 1.004 | OD139430/2026-2027:Supplying and fixing :Welded steel wire fabric of required width having rectangular meshpainted with two or more coats of enamel paint of approved shade over a coat of primer (Priming and painting to be paid for seperately) | 893.85 | kg | - | - |
| 1.005 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | 8 | no | - | - |
| 1.006 | 9.95.3:Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm | 24 | no | - | - |
| 1.007 | OD139458/2026-2027:Providing and fixing Alu-Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%) thickness. Sheet should have protective guard film of 25mm microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50 DSR) | 73.92 | sqm | - | - |
| 1.008 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 24 | metre | - | - |
| 1.009 | OD139431/2026-2027:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications Excluding appropriate priming coat, preparation of surface, etc. complete.
On steel work | 109.76 | sqm | - | - |
stage.html
html • 0.02 MB
finance_1470150.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.03 MB
Tendernotice_3.pdf
PDF • 0.03 MB
viewnit.pdf
Tender Documents • 0.03 MB
BOQ_1470150.xls
BOQ • 0.31 MB
viewsbd.pdf
Tender Documents • 1.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .