CA NO. GE/K-76/2025-26 - REPAIR AND MAINT OF OVERHEAD ELECTRIC LINES AND CONNECTED ITEMS OF VARIOUS UNIT AT BHIMBAT, THASGAM, AND DRASS UNDER GE KARGIL

Excavating in trenches in Hard and dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying of cable etc not exc 10 Sq mtr on plan and not exc 1.5 mtr in depth and getting out complete all as specified and directed by the Engr-in-Charge.

Returning , filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed by the Engr-in-Charge.

Removing excavated surplus soil to a distance upto 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engr-in-Charge

M&L for Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by the Engr-in-Charge and as in clause 19.75 of SSR Part-I.

Supplying and laying un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm laid dry over electric cable for protection complete all as specified and directed by the Engr-in-Charge

Taking out defective Various sizes of cable XLPE/PVC sheathed 1100 volt/11000V grade heavy duty armoured with aluminium conductor from trenches, from wall/poles/under floor etc, shifting serviceable cable for relaying or removing the unserviceable cable complete all as specified and directed by the Engr-in-Charge.

Supplying, laying, jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 Sqmm laid in trenches/duct/pipe including making all electrical connection with required lugs and nuts, bolts, clamps and accessories complete all as specified and directed by the Engr-in-Charge.

All as per item No 7 but size 4 core 16 Sqmm.

All as per item No 7 but size 4 core 25 Sqmm.

All as per item No 7 but size 3.5 core 35 Sqmm.

All as per item No 7 but size 3.5 core 50 Sqmm.

All as per item No 7 but size 3.5 core 70 Sqmm.

All as per item No 7 but size 3.5 core 95 Sqmm.

All as per item No 7 but size 3.5 core 120 Sqmm.

All as per item No 7 but size 3.5 core 240 Sqmm.

M&L for boring of holes under road pavment/hard standing by manual boring including making good the distrubed surfaces complete all as specified and directed by the Engr-in-Charge.

Supplying and laying in repairs GI tubing light grade incl all accessories for passing of cables for mechanical proctection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall / floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends / sockets / reducers / saddles incl necessary threading / drilling works complete all as specified and directed by the Engr-in-Charge.

(a) 80 mm bore

(b) 50 mm bore

S&F in repair Aluminium cable lugs of size 16 Sqmm complete all as specified and directed by the Engr-in-Charge.

All as per item No 18 but of size 25 Sqmm specified

All as per item No 18 of size 35 Sqmm as specified

All as per item No 18 of size 50 Sqmm as specified

All as per item No 18 of size 70 Sqmm as specified

All as per item No 18 of size 95 Sqmm as specified

All as per item No 18 of size 120 Sqmm as specified

All as per item No 18 of size 240 Sqmm as specified

Taking out and Re-laying of existing LT UG cable of any size after jointing using LT cable joining kit complete all as specified and directed by the Engr-in-Charge. Note : (i) Excavation incl earth work shall be measured and paid separately. (ii) Joint shall also be measured and paid separately under respective item of this Schedule (iii) Cable protection i.e. bricks, sand cushioning etc. shall be measured and paid separately under respective item if not available in existing trench.

S&F LT Cable joining kit straight through heat shrinkable type complete with joining materials suitable for LT Armoured cables of size upto 50 Sqmm 3.5 core complete all as specified and directed by the Engr-in-Charge.

All as per item No 27 but size 70 sqmm 3.5 core.

All as per item No 27 but size 95 sqmm 3.5 core.

All as per item No 27 but size 120 sqmm 3.5 core.

S&F LT Cable joining kit outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for LT Armoured cables of size 50 Sqmm 3.5 core complete all as specified and directed by the Engr-in-Charge.

All as per item No 31 but size 70 sqmm 3.5 core.

All as per item No 31 but size 95 sqmm 3.5 core.

All as per item No 31 but size 120 sqmm 3.5 core.

All as per item No 31 but size 240 sqmm 3.5 core.

S&F in repairs MCCB, 630A, rupturing capacity 50 KA, 415 volts 4 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 400A, rupturing capacity 36 KA, 415 volts 4 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 250A, rupturing capacity 36 KA, 415 volts 4 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 250A, rupturing capacity 36 KA, 415 volts 3 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 160A, rupturing capacity 36 KA, 415 volts 4 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 160A, rupturing capacity 36 KA, 415 volts 3 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 125A, rupturing capacity 16 KA, 415 volts 4 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 125A, rupturing capacity 16 KA, 415 volts 3 pole adjustable type complete all as specified and directed by the Engr-in-Charge

S&F in repairs MCCB, 63A, rupturing capacity 16 KA, 415 volts 4 pole adjustable type complete all as specified and directed by the Engr-in-Charge.

S&F in repairs MCCB, 63A, rupturing capacity 16 KA, 415 volts 3 pole adjustable type complete all as specified and directed by the Engr-in-Charge.

S&F in repairs 415V, 10KA 'C' curve MCB TPN of 40 to 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed..

S&F in replacment of ON LOAD change over switch with sheet metal enclosure 415V , 4 pole of capacity 400 Amps including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and directed by the Engr-in-Charge.

S&F in repair of ON LOAD change over switch with sheet metal enclosure, 415V , 4 pole of capacity 200 Amps including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and directed by the Engr-in-Charge.

S&F in repair of ON LOAD change over switch with sheet metal enclosure, 415V , 4 pole of capacity 100 Amps including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and directed by the Engr-in-Charge.

S&F in repair of ON LOAD change over switch with sheet metal enclosure, 415V , 4 pole of capacity 63 Amps including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and directed by the Engr-in-Charge.

Dismantling insulators any type, any size from its original position and removing from site complete complete all as specified and directed by the Engr-in-Charge.

S&F pin type composite/polymer incl one galvanised MS spindle, two washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade fixed on poles/cross arms of upto 9 m long complete all as specified and directed by the Engr-in-Charge.

All as per Srl item No. 52 but of size 150mm height & 150mm dia for 11000 volts grade.

S&F shackle type composite/polymer insulator incl galvanised mild steel straps, washers, insulator bolts, washers and nuts for working pressure 1100 volt section of strips 31x5 mm bolt dia 14 mm max dia 115 mm, height 100 mm fixed on poles/cross arms of upto 9 m long, complete all as specified.

S&F Disc type composite/polymer insulator 150mm high and 150mm dia ball and socket type, white, brown or green with tension clamps for conductors, working pressure 11000 volts complete all as specified and directed by the Engr-in-Charge.

S&F of Disc type insulator composite/polymer one galvanised MS spindle, two GI washers and one GI nut, for 11000 volts grade complete all as specified and directed by the Engr-in-Charge.

Dismantling and taking out the old stay assembly complete incl demolition of plain cement all as specified and directed by the Engr-in-Charge. Note : (i) Unit rate of this item includes the loose/disconnect the all accessories which are connected to stay assy includng necessary excavation as directed. (ii) Existing stay assy are fixed on the LT/HT pole of PCC or steel tubular pole, nothing extra shall be paid on this account.

M&L for provision of Stay assembly complete with accessories as shown in electrical plate No 1 incl GI Adjustable Stay Rod of 16 mm Dia, GI Stay wire of size 7/4 mm incl stay clamps, loop type insulator, excavation in any strata and PCC 1:3:6 concrete complete all as specified and directed by the Engr-in-Charge. Note:- Unit rate of this item includes the cost of earthwork, loop type insulator, PCC and stay wire.

Re-stretching the existing LT/HT over head line consisting of 5/4/3 conductors of any size using Mechanical tool and one GI wire after removing serviceable/unserviceable separators carefully including opening and reconnecting of jumpers binding conductor over the insulator properly with the help of binding wire 14 SWG and re-fixing separators in its original position complete all as specified and directed by Engineer-in-charge.

S&F PVC line seperator for separating 3/4/5 LT overhead lines all as specified and directed by the Engr-in-Charge.

Dismantling/taking down old unserviceable ACSR conductor of any size from LT poles over head electric line after disconnecting from insulators complete all as specified and directed by Engineer-in-Charge.

Supply and stringing aluminium conductor steel reinforced (ACSR) stretching properly to achieve proper sag on insulators and binding with aluminium tape/binding wire connectors, PG clamps , jumpers etc complete all as specified and directed by the Engr-in-Charge.

Material and labour for preparation of old surface of steel pole including channels and applying two coats of aluminium paint including making five no. alternative yellow & black strips 30 cm height each (upto 1.50 metre height from top of PCC coping & numbering to the poles with synthetic enamel paint complete all as specified and directed by the Engr-in-Charge.

S&F in repair of Digital Multifunctional Panel meter for measuring Voltage ( 0-500V min ), Current, P.F etc including necessary P.T & C.Ts with all connected acccessories complete all as specified and directed by the Engr-in-Charge.

S&F in repair of Digital voltmeters 0-500V , with all connected accessories including connecting up and testing complete all as specified and directed by the Engr-in-Charge.

S&F in repair of Digital Ammeter 0-600A (min) with CTs, all connected accessories including connecting up and testing complete all as specified and directed by the Engr-in-Charge.

Dismantling and taking down existing steel tubular LT pole 9 mtr long including dismantling of overhead conductors, cross arm, insulators, clamps etc. including necessary earth work, breaking of PCC and shifting to new location or deposited to MES Store Yard complete all as specified and directed.

M&L for fixing of pole retrieved serviceable from ser item No. 68.00 above including fixing of dismantled overhead conductors, cross arm, insulators, clamps etc includingnecessary excavation, removing of surplus soil, PCC foundation and coping of poles etc. complete all as specified and directed.

M&L for painting of LT Panel Indoor/Outdoor type over a coat of red oxide prime including angle iron with spray gun with two coats of synthetic enamel grey paint including preparation of old painted surfaces/removing old faded/rust/ cemented material of surface complete all as speciied and as directed.

Supply and laying in replacement of double wall corrugated HDPE (DWC) pipe of size (Outer Dia x Inner Dia= 50 mm x 38 mm) in trenches for protection of cable complete all as specified and directed.

Supply and laying in replacement of double wall corrugated HDPE (DWC) pipe of size (Outer Dia x Inner Dia= 63 mm x 50 mm) in trenches for protection of cable complete all as specified and directed.

Supply and laying in replacement of double wall corrugated HDPE (DWC) pipe of size (Outer Dia x Inner Dia= 77 mm x 63 mm) in trenches for protection of cable complete all as specified and directed.

M&L in replacement of GI guard wire protection for overhead LT/HT lines at crossing over roads, paths or buildings, consisting of GI wire not less than 8 SWG, properly stretched and secured to insulators/ MS supports with necessasry clamps, bindidng wire, bolts and nuts with min verticale clearance of 1.5 mtr from overhead conductors complete all as specified and directed.

M&L for Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and directed.

M&L in replacement of ISMC Cross Arms, supports, clamps etc fixing on pole fabricated from structural steel sections including disconnection of conductors, nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts, in any shape and size and fixing the conductors at its original condition as indicated or directed with inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified. Note- Restreching of conductors after fixing the Cross arm will paid in respective items of this schedule.

Note : Deduction for amount of Rs.72814.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract.

Please Enable Macros to View BoQ information