Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹10.0 L+₹3,679 (0.37%)Rejected-Finance 247 DHAMPURA LAKSAR ROAD DISTT HARIDWAR 249408 UTTARAKHAND | HARIDWAR | HARIDWAR | UTTARAKHAND | 249408 | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Not meet TQR | |
| 4 | Rejected-Technical | - | Rejected-Technical Not meet TQR |
| Sl No | Description | Qty | Unit | M/s VEERPAL SINGH CONTRACTOR L1 | MAHAVEER TECHNO ENGINEERS L2 |
|---|---|---|---|---|---|
| 1.00 | Boring, Drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS:2800 (Part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, up to 90 metre depth blow ground level. All types of soil: 300 mm dia. | 65 | Meter | 647 ₹42,055 Lowest | 650 ₹42,250 |
| 2.00 | Development of tube well in accordance with IS:2800 (Part I) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully deveoped, measuring yield of well by "V" notch method or any other apporved method, measuring satic level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | 40 | Hour | 1,030 ₹41,200 Lowest | 1,040 ₹41,600 |
| 3.00 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing /casing pipe, removable as per requiement, all complete for bore well of :200 mm dia. | 2 | Each | 242 ₹484 | 240 ₹480 Lowest |
| 4.00 | Providing and fixing M.S. Clamp of required dia to the top of casing /housing pipe of tubewell as per IS :2800 (Part I), including necessary bolts & nuts of required size complete :200 mm clamp. | 2 | Each | 1,990 ₹3,980 | 1,900 ₹3,800 Lowest |
| 5.00 | Supply and installation 3 phase L&T make/ havells make panel board containing contact relay auto start ammeter ,voltmeter ,volt selector rotary on off switch lane ,kit kat ,HRC fuse start/stop button ,push button for volt meter ,indicator ,connector strip housing lock sheet metal housing for 7.5 to 25 HP .Pump including supply of all materials ,labour and T&P including supply of all materials ,labour and T&P etc required for proper completion of the work. | 2 | Each | 16,845 ₹33,690 | 16,800 ₹33,600 Lowest |
| 6.00 | Providing & fixing of 7.5 HP 415 V AC three phase submersible pump & motor with a discharge of 100-150 LPM on a head 150 meter of KSB/kilosker make as approved by engineer-in-charge including all labour & T&P etc required for proper completion of work. | 1 | Each | 87,100 ₹87,100 | 85,000 ₹85,000 Lowest |
| 7.00 | Supply and fixing flat submerisble cable of superior quality as directed by engieer-in-charge (3*6.0) sq mm approved make including all material and T&P etc complete. | 65 | Meter | 250 ₹16,250 | 230 ₹14,950 Lowest |
| 8.00 | Supplying, installing, testing and commissioning of following starter & capacity TPN tap off box made of 1.6 mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses,connection ,earthing etc as required 100 amps. TPN . | 1 | Each | 15,810 ₹15,810 | 15,750 ₹15,750 Lowest |
| 9.00 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW ( Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS :4270 of reputed & approved make, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer -in-charge 200 mm nominal size dia having minimum wall thickness 5.40 mm. | 60 | Metre | 2,730 ₹1,63,800 | 2,650 ₹1,59,000 Lowest |
| 10.00 | Providing and fixing gun metal non return valve of apporved quality ( Screwed end) : 80 mm nominal bore : Horizontal. | 2 | Each | 3,515 ₹7,030 | 3,425 ₹6,850 Lowest |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
28 Jun 2025, 1:00 pmClosed
Superintending Engineer
SE, O and M Circle, PTCUL ,26-Civil Lines, Roorkee.
New Boring work for water supply arrangement at 132 KV Substation Jwalapur.
2025_PTCUX_84418_1
T-18/SE(OandM)CR/2025-26
Open Tender
Miscellaneous Works
Item Rate
60 days
Jwalapur
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Yes
SE O and M PTCUL Roorkee
₹30,000
Yes
27 Oct 2025
29 May 2025
30 Jun 2025
29 May 2025
28 Jun 2025
29 May 2025
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .