CA NO GE SOUTH AMB 59 2024 2025 PROVISION OF CERTAIN SANCTIONED B R AND E M WORKS OF AGE B R I SOUTH UNDER GE SOUTH AMBALA CANTT

Amount

[B&R PORTION] Dismantling of AC corrugated, semi corrugated sheet including ridges etc. in roof covering complete all as complete all as specified and directed.

Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets, false ceilings etc complete all as specified and directed.

Demolition of brick work built in CM including all quions arches, pillar etc complete all as specified and directed.

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge.

Demolition of Cement Concrete as in G.F & paving n. exc. 15cm thick (above or below G.L.) complete all as specified and directed.

Material and labour for Roughening of old surfaces of old concrete floor by picking , sweeping,clean and washing down with water to remove dust etc all as directed and specified.

Taking down chowkaths or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed.

Taking down chowkaths or frames exc 1.5 sqm but n exc 4.0 Sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and directed.

Taking down of Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), incl all fittings, complete all as specified.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site

Material and labour for brick work with old size sub class ‘B’ bricks,straight or curved on plan to any radiousl built in cement mortar (1:4) complete all as specified and directed.

All as per Item No 15 here but except bricks complete all as specified and directed.

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radious in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed .

Material and labour for Rendering 15 mm thick on surface of any description of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified. NOTE: WPC will be measured and paid for separately.

Material and labour for rough cast plastering over and incl 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. Rough cast plaster shall be applied as specified clause 14.22 of SSR Part-I .

Supply only integral water proofing comound ISI Marked complete all as specified and directed.

Material and labour Roof Trusses (framed) , trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Supply and fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 complete all as specified and directed.

Material and labour for plates (plain and chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment of Fe-410W(gde-E-250) quality A complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.

Supply and fixing in repair Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.

Supply and fixing of anodised GI snap grid frame work for false ceiling grid 605x605 mm fixed with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including Supply and fixing Gypsum Board 12mm thick as in ceilings fixed with screws as per manufactures instructions etc complete all as specified all as specified and directed.

Material and labour 25mm thick cement concrete Type B1 1:2:4 (12.5mm graded aggregate) as in floor finished rough to recieve floor finishes etc complete all as specified and directed.

Material and labour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 8 to 9 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 8 to 9 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

Material and labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, polishing, rounding and moulding of stone slabs on edges, including dismantling of existing stone /tiles etc including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Rounding to edges of stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified.

Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 75 x 50 mm comprising f virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. Note: Material Test Certificate & Authentication should be provided by the manufacturing company.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. Note: Material Test Certificate & Authentication should be provided by the manufacturing company.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. Note: Material Test Certificate & Authentication should be provided by the manufacturing company.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed.

Supply and fixing of stainless steel butt hinges 100 mm long medium weight complete all as specified and directed.

Supply and fixing Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 1800 N ( Face ) & 900 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge. NOTE: Material test certificate and authentication should be compulsory provided by the manufacturing company : For Internal/Balcony/Main Doors.

Supply and fixing 100mm long stainless steel (ISI Mark) handle complete all as specified & directed.

Supply and fixing 150 mm long stainless steel (ISI Mark) tower bolt and fixed complete all as specified & directed.

Supply and fixing 150 mm long stainless steel (ISI Mark) handle complete all as specified & directed.

Supply and fixing 200 mm long stainless steel (ISI Mark) tower bolt and fixed complete all as specified & directed.

Supply and fixing 300mm long stainless steel (ISI Mark) sliding door bolt, staple (bolt type) and fixing with bolts extruded sections complete all as specified & directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

Supply and fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm with concealed bracket. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Shutter brackets with a in build PVC lip to be fixed in a way that the lip overlaps the shutter corner and are not exposed. Stay of 150mm long and 75 mm handles 2 Nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. Note :- AC/Cooler opening will be provided as per std size/directed by Engineer-in-Charge/GE.

Supply and fixing Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fixing 0.80 mm thick mild steel plain black sheeting as in covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified.

Material and labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed by Engr-in-Charge.

Supply and fixing stainless steel curtain rod 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two lotto for each road length at both end etc as in repair complete all as specified and as directed by the Engineer-in-Charge. Note :- Sample of side knob/Latto and bracket should be approved from Engineer in Charge before fixing.

Supply and fixing SS peg set of 5 size 300x20x2.5mm all as specified and directed.

Material and labour for 2nd class hardwood small fittings such as brackets of any type, latch and hinge block, shaped door and window stops and the like including all labours articles n. exc. 200 cucm each with & including 50mm long hinges complete all as specified and directed.

Supply and fixing of mild steel 300 mm, helical door spring with roller plate for door shutter including welding if necessary fixed in repair complete all as specified and directed.

Supply and fixing in repairs of mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 20 gauge mild steel sheet in two leaves as built in furniture in cupboards including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. all as per Godrej pattern including two coats of spray painting over a coat of red oxide primer complete fixed on brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0, complete all as specified and directed.

Supply and fixing stainless steel plate rack of standard size 750mmx600mm x250 mm complete and fixing with rawl plug and steel screws of wt not less than 8 kg each complete all as specified and directed.

Dismantling wooden boarding any description, fixed in any position with nails as in shelves of cup board and pelmets ,kitchen cupboard of any description complete all as specified and directed .

Supply and fixing Factory Made Single Extruded WPC (Wooden Polymer Composite) Solid Plain Board 18mm Thick comprising of virgin polymer of K Value 58 -60 (Suspension Grade), Calcium Carbonate & Natural Fibers (Wood Power / Rice Husk /Wheat Husk) & Non-Toxic Adhesives (Maximum Toxicity index of 12 for 100 gram) having minimum density of 650 Kg/ CUM & Screw withrawal strength 1800 N (face) & 900 N (Edge), Minimum Compressive strength 50 N/ mm 2. Modulus elasticity 850 N / mm Sq & Resistance to spread of flam of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. (Note: Stainless Steel butt hinges and necessary SS screws shall be paid separately) Note: Material Test Certificate & Authentication should be provided by the manufacturing company.

Supply and fixing Factory Made Single Extruded WPC ( Wooden Polymer Composite) Solid Single Side PVC Laminate with PVC Foil of minimum 14 Microns thick of approved color shade Board 18mm Thick comprising of virgin polymer of K Value 58 -60 ( Suspension Grade) , Calcium Carbonate & Natural Fibers ( Wood Power / ) Rice Husk /Wheat Husk ) & Non Toxic Adhesives ( Maximum Toxicity index of 12 for 100 gram ) having minimum density of 650 Kg/ CUM & Screw withrawal strength 1800 N ( face ) & 900 N ( Edge) , Minimum Compressive strength 50 N/ mm 2 . Modulus elasticity 850 N / mm Sq & Resistance to spread of flam of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. (Note: Stainless Steel butt hinges and necessary SS screws shall be paid separately) Note: Material Test Certificate & Authentication should be provided by the manufacturing company.

Supply and fixing Factory Made Single Extruded WPC (Wooden Polymer Composite) Solid Plain Board 12mm Thick comprising of virgin polymer of K Value 58 -60 (Suspension Grade), Calcium Carbonate & Natural Fibers (Wood Power / Rice Husk /Wheat Husk) & Non-Toxic Adhesives (Maximum Toxicity index of 12 for 100 gram) having minimum density of 650 Kg/ CUM & Screw withrawal strength 1800 N (face) & 900 N (Edge), Minimum Compressive strength 50 N/ mm 2. Modulus elasticity 850 N / mm Sq & Resistance to spread of flam of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws,, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. (Note: Stainless Steel butt hinges and necessary SS screws shall be paid separately) Note: Material Test Certificate & Authentication should be provided by the manufacturing company.

Supply and fixing for lipping 1-1.5 mm thick 18 mm wide colour of approved design & colour, fixed with solvent cement or head less nails to PVC door complete all as specified and directed.

Supply and fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr–in–Charge. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.

Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed by Engr–in–Charge. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ.

Material and labour for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed by Engineer-in-charge. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.00 m all as directed 6mm joints filled with 85/25 grade bituman and sand in the ratio (1:3) shall be provided.

Supply and fixing Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipeSupply and fixingittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent.

Supply & fixed GI tubing medium grade 15 mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Supply & fixed GI tubing medium grade 20 mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends of edges of landings, steps, cills etc., and cutting chases for concealed water tubing and making good complete all as specified and directed.

Refixing old GI tuibing 15mm bore galvanised with all fittings as in walls,ceilings or floors etc complete all as specified and directed.

Refixing old GI tuibing 20mm bore galvanised with all fittings as in walls,ceilings or floors etc ccomplete all as specified and directed.

Supply & fixeing in repairs vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including making good floors complete all as specified and directed.

Supply and fixing in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe all complete all as specified and directed.

Supply and fixed vitreous china wash hand basin white flat back of size 550x440mm including CI brackets, fasteners 2 Nos , chromium plated waste coupling of Ist quality , waste pipe etc. complete all as specified. (incl all waste fittings).

Supply and fixed, in repair of WHB mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply and fixing in repair of wall mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply and fixing in repair Sink Mixer with regular spoutw with flange complete all as specified and directed.

Supply and fixing CP Water purifier RO Connecting piece for Water Bib Tap for inlet of RO etc complete all as specified and directed.

Supply and fixing Two way angle cock with flange chromium plated of bore 15 mm complete all as specified and directed.

Supply and fixing in repair corner glass shelf with CP stand complete all as specified and directed.

Supply and fixing in repair Bib tap, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, suitable for 15 mm bore pipe, complete all as specified and directed.

Supply & fixed in repairs stainless steel grating openable 100mm size with/without hole including fixing with white cement complete all as specified and directed.

Supply and fixing in repair Stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 20mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type).

Supply & fixed in repair fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint in complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long.

Supply and fixing in repair of soap dish chromium plated of size 100x100x60mm superior quality, fancy type fixed with and including brass CP screws complete all as specified and as directed.

Supply and fixing chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

Supply and fixing in repair of CP brass tubular towel ring, 150 mm dia fixed with CP brass screws complete all as specified and as directed.

Supply and fixing in repair for PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, waste pipe complete all as specified.

Supply and fixing PVC Bathroom Mirror Cabinet of size 350x450mm complete all as specified and directed.

Material and labour stack clamps of 50mm by 5 mm flat iron and 16 mm dia round iron stays, incl bolts & nuts and securing ends of stays to wall or roof for 100/110 mm bore CI/PVC Pipe complete all as specified and directed.

Supply and fixing for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing AC pipes of any description any length complete all as specified and as directed.

Supply and fixing PVC (SWR) 75 mm pipe type A single socket in any length with rubber ring joints laid in floors or trenches including dismantling of existing pipes of any description any length complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends 110 mm bore complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends 75 mm bore complete all as specified and as directed.

Supply and fixing of 110 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed.

Supply and fixing in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer dia metre outlet of 75 mm complete all as specified and directed.

Supply and fixing door seal PVC 30mm wide with foam complete all as specified & directed by Engineer-in-Charge.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Material and labour, two coats of cement base paint on newly plastered wall surfaces incl preparation of surfaces over a coat of primer with alkali- resistant priming paint complete all as specified and directed.

Material and labour, two coats of Exterior Emulsion on newly plastered wall surfaces including preparation of surfaces over a coat of primer with alkali- resistant priming paint complete all as specified and directed. Note :- Colour will be approved from Engineer in Charge before applying of Emulsion.

Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in- Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying two coats of cement base paint over a coat of alkali resistant primer upto to 6 metre including necessary scaffolding etc complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound with hand roller ,over a coat of alkaline resistant primer over a coat of birla wall care putty surface complete all as specified and directed.

Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed.

Preparation of old Plastered or un-plastered surfaces of walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on walls complete all as specified.

Applying three coat of white washing on newly plastered wall surfaces, including preparation of surfaces, complete all as specified.

Supply and fixing for heavy duty tiles (coloured),good grip series,size 400 mm x 400 mm x 10 mm thick ,pattern as approved by Engr - in - Charge ,set , jointed and pointed in neat cement slurry @ 3 kg/square metre ,laid over and including 20mm thick (average thickness) cement mortar (1:4) bed complete all as specified and directed by Engineer- in - Charge . (Note: Design/pattern shall be as approved by GE/Engr -in-Charge at the time of execution)

Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Supply and fixing Mild steel TMT bar 10mm dia and over cut to length bent to shape required, including cranking bending spirally and binding with and including mild steel sire (annealed) not less than 0.9mm dia all as specified and directed.

Material and labour for RCC (Nominal Mix) type B-0 1:2:4 (using 12.5 mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of existing RCC as site requirement complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub base of floor a complete all as spd and directed.

Material and labour for Sand filling under floor including watering and consolidation 40 mm thick complete all as specified and directed by Engr in Charge.

Material and labour for Machine Pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M 35 grade with white cement glossiness in pigments and laid in position/pattern all as approved and directed by Engineer-in-Charge.

Material and labour for providing pre cast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping,knees, apex stone, Kerb stone ,column, fencing post ,door cills,deck slab, pre cast slab etc and like this set in cm(1:4) complete all as specified.

Material and labour for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel including cleaning of existing drain before repairing as per site requirement complete all as specified.

Removing buildings materials (Demolished /excavated around MD/OTM Accn) including loading , Unloading and Stacking at the destination before loading in trolly and dumped outside of MOD land distance not exc 5 KM complete all as specified and directed. Note :- Qty of demolished materials in each load should not be less than 2.50 Cum.

Excavation in trenches in soft/loose soil n. exc 1.50 metre wide and n. exc 1.50 metre deep for foundation ,cesspit ,drain etc and getting out complete, all as specified.

Material and labour for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone agg as in foundation filling and mass concrete all as specified.

Material and labour Brick work with sub class 'B' old size bricks of class designation 100, straight or curved on plan exceeding 6.00 mtr mean radius built in cement mortar (1:4), complete all as specified.

Material and labour for providing PCC 1:2:4 type B-1 (20mm graded stone aggregate ) as in coping/ benching etc including necessary form work complete all as specified and directed.

Material and labour for Flush pointing to brick wall in CM 1:3, complete all as specified.

Removing excavated soil to a distance exc 250 mtr but not exceeding 500 and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches complete, all as specified.

Material and labour for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab etc, fixed dry, including provision of necessary form work complete all as specified.

[E&M PORTION] Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20 mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 131 here in before but for socket out let point 6 Amps on same board, complete all as specified.

Description all as per item No 131 here in before but for socket out let point 6 Amps on independent board complete all as specified.

All as per srl item No 131 here in before but point wiring for one socket out let 16 & 6 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fix in repair modular switch 6 Amps, single pole, one way, 230 volt , AC supply, complete all as specified and directed.

Supply and fix in repair modular switch 16 Amps, single pole, one way, 230 volt , AC supply, complete all as specified and directed.

Supply and fixing modular bell push 6 amps, single pole, one way, 230 Volts, 50 Hz , AC supply, complete all as specified and directed.

Supply and fix in repair modular socket outlet 3 pin 6 amps, 230 volts complete all as specified and directed.

Supply and fix in repair modular socket outlet 16 amps, 230 volts complete all as specified and directed.

Supply and fix in repair modular fan regulator step type one module/2 modules, 120W, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified.

Supply and fixing door bell electric, ding dong type, single phase, 230 volts, ISI Marked, complete all as specified and directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.

Supply and fix LED lamp 9 watt for batten fittings

Supply and fixing of LED luminaries of capacity 20 watt aluminium housing integrated batten with including Oppel diffuser complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and as directed.

Supply and fix decorative surface mounted LED tube light fitting with high efficient diffuser mirror light, in CRCA body suitable and including 10 watt LED high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.

Supply and fixing Bulk Head Fitting 10 Watt and connected with copper conductor cable of size 1.50 Sqmm, for fixing the light fitting complete all as specified & directed.

Supply and fixing bracket for security light made up of 40mm dia,0.9m long GI pipe, light grade 120 degree, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15 cm long, 4 nos 8 mm dia bolts with nuts complete all as specified and directed.

Supply and fix LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W eachand having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.

Supply and fixing sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts including taking down existing sheet metal enclosure of any size & cap complete all as specified and directed.

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed.

Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SP and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning.

Supply and fixing sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole adjustable thermal release type ,125AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed.

Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor cable 6.0 sq mm drawn in and including rigid non metallic PVC medium grade 20/25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed.

Point wiring using approved colour coding as per IS with stranded copper conductor 2.5 Sqmm (nominal area),single core ,FRLSH PVC insulated and unshaethed stranded cable 1100 volts grade ISI-694 marked in and including heavy duty ,PVC concealed conduit ISI marked for one industrial type metal clad earth plug and socket out let with earth dolly including FRLS PVC Insulated unsheathed copper conductor 2.5 Sqmm nominal cross section area as earth continuity conductor upto common earth and connecting to common earth dolly complete and including cutting/chasing of wall complete all as specified and directed by Engg in Charge. (For Geyser )

Material and labour for taking down ceiling fan any type, taking in safe custody and refix the same after completion of repair work including servicing, provision of cable from ceiling rose and painting with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust all as specified and directed.

Material and labour for taking down electric meter single phase any capacity alongwith its connection and keeping in safe custody and refix the same after competion of work incl necessary wiring work from meter to main DB all as specified and as directed.

Material and labour for taking down existing lighting fiting any type/size/Make/capacity i.e T/L, bulk head, mirror light etc and re-fixing the same after minor repair/cleaning including replacement connection wire with suitable size coper wire twin core 0.75 sqmm for connection from ceiling rose to light fitting complete all as specified and directed.

NOTE:- Amount of credit of Rs. 1,19,280.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Parveen Kumar (BID ID -3264922)

Ashwani Kumar (BID ID -3264110)

AMIT LAMBA (BID ID -3259404)

Gupta Enterprises (BID ID -3264277)

power house batteries (BID ID -3259750)

G8 CONSTRUCTIONS (BID ID -3264540)