Repair and maintenance of CHC building Baldwara in Tehsil Baldwara Distt Mandi

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completeincluding all leads and lifts and as per the direction of Engineer-in-Charge

Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including all leads and lifts and as per the direction of Engineer-in-Charge

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as permanufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including all leads and lifts and as per the direction of Engineer-in-Charge

Dismantling tile work in floors and roofs laid incement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm including all leads and lifts and as per the direction of Engineer-in-Charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm including all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 10mm (ten milimetre) thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 300x300x10mm ( three hundred into nine hundred into ten milimete) manufactured of approved shade and colour in skirting ,riser of steps laid over 12mm (twelve milimetre) thick mortar 1:3 (one cement :three sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and other incidentals.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

Backfilling behind retaining walls, breast walls, abutments,wing walls and return walls complete as per drawing and technical specifications clause 1204.8 in all leads and lifts and carriage of materials by all modes of transportation and as per direction of Engineer-in-Charge

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40mm thick 2nd class deodar wood.