REFURBISHMENT OF EXISTING SARDAR PATEL SMRUTI BHAVAN AUDITORIUM AT T.P.S. NO.: 4 (ASHWINIKUMAR- NAVAGAM), F.P. NO.: M/3. IN EAST ZONE - A (VARACHHA) OF SURAT MUNICIPAL CORPORATION.

DTS no. Description Qty. without GST & Unit

PART 01: BUILDING CIVIL & REPAIR PART

SUB PART A:- RCC WORKS

WORK UP TO PLINTH

Excavation for foundation including sorting out and stacking off

useful materials and disposing of the excavated stuff up to

mt. lead and all lift, watering- Dewatering etc.comp.

loose or soft soil (With Manual Labour)

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc. Comp.

(A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

M. For following diameter of piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

agg. 20 mm nominal size)& curing comp. Includ.cost of form

work but exclu.

Cost of reinforcement for reinforced concrete work in :

4 5 (A) Foundation and plinth 71.00 ₹ 3,637.34 C.M. ₹

Providing & laying C.C 1:2:4 (1cement :2 coarse sand :4

crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

5 8-A cost of from work in: wall caps / copings. 7.00 ₹ 3,982.62 C.M. ₹

Providing & laying Granular sub base (GSB) confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD including

all material, labour, machinery with all leads and lift etc.

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 / Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost of

form work and rendering but excluding cost of reinforcement. :

(A) foundation, footing, base of columns and mass

concrete 18.00 ₹ 4,180.62 C.M. ₹

( A ) Column: (From Footing to GB)

(3) Having cross sectional area more than 0.12 sq. mt 6.00 ₹ 9,190.79 C.M. ₹

( B ) Beam (Ground Beam)

(3) Having cross sectional area more than 0.12 sq. mt . 25.00 ₹ 6,999.09 C.M. ₹

(G) Vertical and horizontal fins / RCC Pardi

7 6- A Any thickness 1.00 ₹ 9,030.72 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

incl. bending, binding & placing in position etc. comp. Upto

DTS no. Description Qty. without GST & Unit

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

9 18 (C) Fly Ash Bricks

Filling available excavated earth excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited

10 12 layer by ramming and watering. 524.00 ₹ 130.39 C.M. ₹

Filling in foundation and plinth with murrum or selected soil in layers

of 20cm. thickness including watering, ramming and consolidating

11 13 etc. complete. 100.00 ₹ 289.06 C.M. ₹

Providing and laying 200 micron plastic sheet on prepared sub base

12 102 For V.D.S Concrete or to any concrete base. 400.00 ₹ 26.00 C.M. ₹

Carring out plinth treatment to post construction / existing structure

13 15 by spraying chemical solution, Injecting in Flooring wall corner, ceiling- 7950.00 ₹ 116.00 S.M. ₹

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing

coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

1:1 (1cement: 1 sand) apply thick cement slurry and apply roller

horizontal aswell as vartical ( two times ) up to good quality and size

SMC- of grain in elevation as per directed by engineer incharge.Excluding

14 SOR.NO-28 GST

Providing & applying two coats of weather shield max paint (3 coats

15 17 may be required in case of darker colours.)of ICI Dulux or Apex 150.00 ₹ 82.00 S.M. ₹

WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 / Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost of

form work and rendering but excluding cost of reinforcement. :

(3) Having cross sectional area more than 0.12 sq. mt

Ground Floor 9.00 ₹ 9,190.79 C.M. ₹

First Floor 8.00 ₹ 9,230.39 C.M. ₹

Second floor ( terrace floor lvl 6.4m level ) 3.00 ₹ 9,269.99 C.M. ₹

(3) Having cross sectional area more than 0.12 sq. mt

Ground Floor 13.00 ₹ 6,999.09 C.M. ₹

(3) Slab having more than 10C.M. & up to 13C.M. thickness

Ground Floor 23.00 ₹ 6,727.93 C.M. ₹

First Floor 0.00 ₹ 6,767.53 C.M. ₹

Second floor 4.00 ₹ 6,807.13 C.M. ₹

Ground Floor(level 3.67) 1.00 ₹ 6,913.25 C.M. ₹

First floor 1.00 ₹ 6,952.85 C.M. ₹

Second floor 1.00 ₹ 6,992.45 C.M. ₹

Ground floor 10.20 ₹ 9,419.25 C.M. ₹

First floor 5.10 ₹ 9,458.85 C.M. ₹

Second floor 0.00 ₹ 9,498.45 C.M. ₹

Providing and laying cement concrete 1: 4: 8 (1 cement :

4coarse sand :8 graded stone aggregates 40 mm nominal size)

and curing complete excluding cost of formwork in

17 4 (A) Foundation and Plinth 0.00 ₹ 2,680.21 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

reinforcement for R.C.C. work incl. bending, binding & placing in

position etc. comp. Upto G.L./P.L.

Ground floor 8050.00 ₹ 76.21 Kg. ₹

DTS no. Description Qty. without GST & Unit

First floor 5200.00 ₹ 77.21 Kg. ₹

Second Floor (Terrace Floor) 3650.00 ₹ 78.21 Kg. ₹

18 10 3rd Floor (Staircabin Top Floor) 350.00 ₹ 78.21 Kg. ₹

PART B :- DISMANTLING WORK

Demolishing Brick work and stone masonry incl. including

stacking of serviceable material and disposal of unserviceable

material with all lead and lift.

Self At any height including Props & Scafolding.

19 Explained (ii) In cement mortar 216.00 ₹ 550.40 C.M. ₹

Removing the scraping of old deteriosted plaster of any

thickness form wall/R.C.C. member including strcking of

serviceable material and disposal of unserviceable material from

site of work with all lead and lift.and note plaster scraping with

Self wide chisal only.

20 Explained At any height including Props & Scafolding. 4832.00 ₹ 19.57 S.M. ₹

Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift. At any

height including Props & Scafolding.

Self At any height including Props & Scafolding.

21 Explained 1.) R.C.C work 26.00 ₹ 1,057.47 C.M. ₹

Demolition of terrace including stacking of serviceable

materials and disposal of unserviceable materials with all lead

1.) Brick tile covering water proofing up to any thickness

Self and naket slab consider

22 Explained At any height including Props & Scafolding. 150.00 ₹ 42.42 S.M. ₹

Dismantling C.I. Pipes, G.S.W. Pipes and A.C.,PVC rain water

Self pipes or SWR with fittings and clamps including stacking the

23 Explained materials with all lead & lift (For any Dia. of pipes ) 200.00 ₹ 74.77 R.M. ₹

Dismantling of sheet roofing including ridges

hips,valleys,gutters etc. staking of serviceable materials and

Self disposal of unserviceable materials with all lead and lift. (i) G.I

24 Explained sheet roofing 51.00 ₹ 47.72 S.M. ₹

Dismantling Doors, Windows, Ventilators etc. (wood or steel)

shutters including chowkhats, architreaves, holdfasts, and other

attachment etc. complete and stacking them within all lead and

25 Explained (1) Not exceeding 3 sq. meters in area . 40.00 ₹ 187.71 EACH ₹

Dismentaling of Tiles floors laid in mortar including stacking

of serviceable material and disposal of unserviceable material

Self with all lead and lift.

26 Explained At any height / levels. 750.00 ₹ 47.72 S.M. ₹

Removing dry or oil bound distemper / weathershield / plastic

paints by a washing and scraping and sand papering the wall

surface smooth including necessary repairs to scratches

Self complete. (All type of inside/outside color with all lead and lift,

27 Explained for all floor levels, including propping, scafolding, etc...) 10980.00 ₹ 11.30 S.M. ₹

28 Explained Dismantling / Removing of Collapsible Gate. 4.00 ₹ 1,500.00 No. ₹

29 Explained Dismantling / Removing of Rolling Shutter. 4.00 ₹ 1,000.00 No. ₹

30 Explained Dismantling / Removing of GI pipe (15mm) 100.00 ₹ 74.77 R. Mt. ₹

31 Explained Dismantling / Removing of GI pipe (25mm) 100.00 ₹ 74.77 No. ₹

32 Explained Dismantling / Removing of GI pipe (32mm) 50.00 ₹ 74.77 No. ₹

33 Explained Dismantling / Removing of GI pipe (40mm) 30.00 ₹ 74.77 No. ₹

DTS no. Description Qty. without GST & Unit

Dismantling sanitary fittings like wash basin, W.C. pan Indian

Self and European type, flushing tank etc. including stacking the

34 Explained materials with all lead and lift. 92.00 ₹ 405.65 No. ₹

PART C:- REPAIR & REHABILITATION WORKS

Providing Cement Concrete work 50% - M30-(design mix)

and 50% micro concrete plus recron - 3s (12mm long

polyester fiber) plus appropriate dose of super plasticizer

with curing, finishing smooth, etc. complete for jacketing of

structural members at all floor levels, lead, lift, including

breaking, chipping, dismentling existing loose cover concrete

and exposing respective existing reinforcement as directed by

the engineer-in-charge, applying wirebrush or mechanical clean

with brush for making surfaces of steel and concrete free from

rust and other loose materials, applying rust removing chemical

on existing reinforcement, applying after 6 hours of anti-

corrosive coating on existing reinforcement, applying epoxy

binding treatment and bonding agent on existing concrete

surfaces as directed by the Engineer-in-charge, etc. complete.

The make and quality of rust removing chemical, anti-corrossive

coating, polymer / epoxy bonding agent shall be approved by

engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification,

which shall be submitted before start of work and shall be

approved by the Engineer-in-charge.

The rates shall include the cost of providing, erecting and

maintaining leakproof shuttering /formwork /scaffolding, etc. to

be used for concreting, providing and erecting props, temporary

frame work and maintain them in position for required time, to

existing load bearing elemnts for reliving loads coming on to

structural members being repaired/strengthened but excludes

the cost of reinforcement. The rate shall also include required

breaking of adjoining RCC structural elements like slab, beam,

etc. and reinstating the same in original shape and size by using

above mentioned procedure and material, as directed by the

Engineer-in-charge, etc. complete.

If required all loose cover concrete shall be removed as directed

by the engineer-in-charge.

Any other work which may get disturbed due to above

mentioned procedure shall be repaired and reinstated to original

condition to the complete satisfaction of the Engineer-in-charge

and NOS claim for extra payment for the same shall be

Self Chemical make: Roff / Fosroc / Ultra-tech / Sunanda Chemicals

35 Explained or equivalent company only. 14.00 ₹ 29,664.00 C.M. ₹

Fixing clerestory window chowkhats in existing openings

including cutting masonry for hold fasts, embedding hold fasts in

cement concrete blocks with cement concrete 1 : 3 : 6 (1 cement

: 3 coarse sand : 6 graded stone aggregate 20 mm single size),

painting two coats of coal tar to sides of chowkhats and making

Self good the damge to walls complete including disposal of rubbish

36 Explained to the dumping ground within 50 m lead. 20.00 ₹ 399.00 NOS. ₹

Providing and applying cement mortar (1:3) modified by using

polymer and expanding grout additives at various thickness for

repair/strengthening of various RCC elements at all floor levels,

lead, lift, including breaking, chipping, dismentling existing cover

concrete and exposing existing reinforcement, applying

wirebrush for making surfaces of steel and concrete free from

rust and other loose materials, applying rust removing chemical

on existing reinforcement, applying anti-corrosive coating on

existing reinforcement, applying polymer bonding agent on

existing concrete surfaces before applying polymer modified

mortar in specified thickness as directed by the Engineer-in-

DTS no. Description Qty. without GST & Unit

The rates shall also include providing and applying 12 mm thick

cement mortar (1:4) modified with plasticizer for finishing

smooth the repaired surfaces, providing and applying curing

agent on the repaired surfaces, etc. complete as directed by the

Engineer-in-charge. The make and quality of rust removing

chemical, anti-corrossive coating, polymer bonding agent,

polymer and expanding grout additives, plasticizer, curing agent,

etc. shall be approved by engineer-in-charge. The procedure for

application shall be strictly in accordance with manufacturer's

detail specification, which shall be submitted before start of work

and shall be approved by the Engineer-in-charge.

The rates shall include the cost of providing, erecting and

maintaining leakproof shuttering /formwork /scaffolding, etc. to

be used for the purpose, providing and erecting props,

temporary frame work and maintain them in position for required

time, to existing load bearing elemnts for reliving loads coming

on to structural members being repaired/strengthened but

excludes the cost of reinforcement.

The rates shall include the cost of providing, erecting formwork

with drainage outlet for presocking and air venting. The

formwork shall be such that it provides suitable excess points to

pour or pump the mixed micro fluid concrete in place. The cost

shall also include providing and erecting props, temporary frame

work and maintain them in position for required time, to existing

load bearing elements for relieving loads coming on to structural

members being repaired/strengthened but excludes the cost of

Chemical make: Roff / Fosroc / Ultra-tech / Sunanda Chemicals

or equivalent company only.

Notes-: Ready made chemical used only as per approved brand

& confrimed with consultant only.

Note :- Consider single measurement only

25mm thickness 250.00 ₹ 1,208.00 S.M. ₹

37 Explained 50mm thickness 250.00 ₹ 2,348.00 S.M. ₹

Providing and fixing rebar of following diameter using chemical

grout of Swanchore/Hilti/Fischer or equivalent make including

cost of all equipments, tools, material, labour, etc. Standard

procedure as mentioned in manufacturer's specifications shall

be strictly followed, which shall be submitted and got approved

from the authority prior to start of work. The rate shall also

include cost of drilling of hole of required diameter and depth as

mentioned in manufacturer's specification, cleaning the hole with

required air blower and other necessary tools and tackles,

positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc.

complete. Item includes necessary scaffolding, staging, labour,

tools and equipments, etc. complete as directed by the engineer-

In general the work shall be carried out as per the standard

specifications of P.W.D. / C.P.W.D./

GWSSB relevant drawings and as per the instructions of

Engineer in Charge. Work shall be carried

out as per item description.

Self (C) 12 mm dia 300.00 ₹ 125.00 NOS ₹

38 Explained (D) 16 mmm dia 150.00 ₹ 190.00 NOS ₹

DTS no. Description Qty. without GST & Unit

Providing and applying cement mortar 1:4 enriched with

expanding grout additive in required proportion in cement for

repair of cracks in RCC and Non-RCC members after making

25mm x 25mm groove, cleaning the surface and applying coat

of bonding, finishing Smooth the repaired surfaces, providing

and applying curing agent on the repaired surfaces, etc.

complete at all floor levels as directed by engineer-in-charge.

The make and quality of expanding grout additives, bonding

agent, curing agent, etc. shall be approved by the engineer-in-

charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which shall

be submitted before start of work and shall be approved by the

Engineer-in-charge

Self Chemical make: Roff / Fosroc / Ultra-tech / Sunanda Chemicals

39 Explained or equivalent company only. 1000.00 ₹ 121.00 R.M. ₹

Carrying out Injection grouting for cracks in RCC structural

members by drilling holes of 15 mm diameter upto minimum

depth of 75 mm, fixing aluminium nozzle plasticised expanding

grout admixtures high fludity with low water cement ratio or at

specified pressure with grouting pump till it the material refuses

to impregnate inside the hole.Grouting material only as

suggested by the Engineer-in-charge, injection grouting shall be

carried out more than once for a hole to assure proper

spreading of grout material and filling of capillaries / voids within

the element. After satisfactory injection grouting, the M.S./

galvenized pakers shall be cut and sealed by non-shrink epoxy

putty. The surface shall be finished Smooth with C:M (1:4) and

reinstated to the original condition as only directed by the

Engineer-in-charge.

The rate shall include the cost of providing and supplying all

tools, materials, labour, scaffolding, props, formwork, etc.

complete. The make and quality of cementious grout or

admixtures , epoxy putty, etc. shall be onlyas approved by the

Engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification,

which shall be submitted before start of work and shall be on;y

approved by the Engineer-in-charge. (Actual no of holes and

their locations shall be as decided by the Engineer-in-charge)

(Note:- Injection grouting consider in unit nos only irrespective of

chemical consumtions)

Self Chemical make: Roff / Fosroc / Ultra-tech / Sunanda Chemicals

40 Expalined or equivalent company only. 100.00 ₹ 250.00 NOS ₹

Carrying out Injection grouting for cracks in RCC structural

members by drilling holes of 15 mm diameter upto minimum

depth of 75 mm, fixing aluminium nozzle / rubber pipe using non-

shrink epoxy putty, low viscous injecting epoxy grout or elastic

two componenet polyurathene injection resin material at

specified pressure with grouting pump till it the material refuses

to impregnate inside the hole. If required or suggested by the

Engineer-in-charge, injection grouting shall be carried out more

than once for a hole to assure proper spreading of grout material

and filling of capillaries / voids within the element. After

satisfactory injection grouting, the pakers shall be cut and

sealed by non-shrink epoxy putty. The surface shall be finished

smooth with C:M (1:4) and reinstated to the original condition as

directed by the Engineer-in-charge.

The rate shall include the cost of providing and supplying all

tools, materials, labour, scaffolding, props, formwork, etc.

complete. The make and quality of epoxy grout, epoxy putty, etc.

shall be approved by the Engineer-in-charge. The procedure for

application shall be strictly in accordance with manufacturer's

detail specification, which shall be submitted before start of work

and shall be approved by the Engineer-in-charge. (Actual no of

holes and their locations shall be as decided by the Engineer-in-

charge) (Note:- Injection grouting consider in unit nos only

irrespective of chemical consumtions)

Self Chemical make: Roff / Fosroc / Ultra-tech / Sunanda Chemicals

41 Expalined or equivalent company only. 70.00 ₹ 450.00 Nos. ₹

DTS no. Description Qty. without GST & Unit

Providing and appliying thixotropic Making up lost section of

concrete / mortor with thixotropic repair mortor of one-

component, normal-setting, shrinkage-compensating, thixotropic

mortar for layers up to 20 mm thick. Supply and application of

one-component, normal-setting, shrinkage-compensating

thixotropic mortar made from cementitious binders, selected

aggregates, special additives and synthetic polyacrylonitrile

fibres, for reconstructing deteriorated concrete structures. Apply

the mortar after adequate preparation of the substrate by

removing all deteriorated concrete to form a sufficiently-rough,

solid substrate with no detached portions. Clean the steel

reinforcement down to bare metal and apply a passivating

treatment by brush-applying two coats of one-component, anti-

corrosion cementitious mortar. Apply the product by trowel or

spray with a continuous-feed rendering machine on a clean

substrate saturated with water in layers up to 20 mm thick.

To improve expansion in the open air during the first few days of

curing, add a special curing additive when mixing the mortar to

reduce both plastic and hydraulic shrinkage at a dose of 0.25%

in weight on the weight of the mortar. The product must comply

with the minimum requirements of EN 1504-3 for structural

mortars and have the following performance characteristics:

Compressive strength (EN 12190) (MPa):> 40 (after 28 days),

Flexural strength (EN 196/1) (MPa): 7 (after 28 days),

Compressive modulus of elasticity (EN 13412) (GPa): 25 (after

28 days) Adhesion to substrate (EN 1542) (MPa):> 2 (after

days), Capillary absorption (EN 13057) (kg/m²•h0.5): < 0.20,

Thermal compatibility measured as adhesion according to EN

1542 (MPa): – freeze-thaw cycles with de-icing salts (EN

13687/1): > 1.5 (after 50 cycles), Storm cycles (EN 13687/2):>

1.5 (after 30 cycles), dry thermal cycles (EN 13687/4):>

(after 30 cycles), Reaction to fire (EN 13501-1) (Euroclass):1

Consumption (per cm of thickness) (kg/m²): approximately

Kg included and calculated in the price for work carried out

according to specification: (1) hydro-cleaning of adhesion

surfaces and saturation of substrate with water immediately

before applying the mortar; (2) application of the mortar by

trowel or spray around steel reinforcement; (3) levelling off

surfaces with a straight edge and final tamping; (4) careful

curing of the mortar by spraying on water for at least 7 days

(3times) after application.

Note :- Consider single measurement only

Self 25 MM THICK 250.00 ₹ 1,370.00 S.M. ₹

42 Expalined 50 MM THICK 250.00 ₹ 2,460.00 S.M. ₹

Self Pointing on brickwork with cement mortar 1:1 (1- cement : 3-

43 Explained coarse sand) 4807.00 ₹ 199.00 S.M. ₹

PART D:- MASONARY & PLASTER WORKS

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar

1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground floor 147.00 ₹ 4,511.97 C.M. ₹

First floor 0.00 ₹ 4,786.95 C.M. ₹

44 18 Second floor up lvl 6.0 m height 0.00 ₹ 5,061.92 C.M. ₹

Providing and constructing half brick masonary in fly ash

building bricks having crushing strength not less than

Kg./sqC.M.. in cement mortar 1:4 (1 cement :4 coarse sand )

curing etc. comp.

Ground floor 10.00 ₹ 625.53 S.M. ₹

First floor 10.00 ₹ 631.79 S.M. ₹

45 19 Second floor 0.00 ₹ 638.04 S.M. ₹

Providing & Applying 15mm. th. cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3 sand) (A) For wall and similar surfaces

( Lead for each floor above or below 28.13 rs )

Ground Floor 869.00 ₹ 237.51 S.M. ₹

DTS no. Description Qty. without GST & Unit

Providing & Applying 20mm. to 35 mm thick Heavy Roller

plaster on walls or similar surfaces at all floor levels consisting

of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand :

racron 3s ( 0.5 nos per bag )) also plaster master wterproofing

chemical 100 ml /bags as per companey manual & approved by

E.I.C or consultant & 8 mm. th. Finishing coat of C.M. 1:1 (1

cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good quality and

size of grain in elevation as per directed by engineer incharge.

47 16 Outside All Floor Plaster 2200.00 ₹ 417.00 S.M. ₹

Providing throating or plaster drip and moulding it to R.C.C.

49 22 chajja etc. comp.. For all floor 250.00 ₹ 41.66 R.M. ₹

PART E:- FLOORING WORKS

Providing & Laying green polished kota stone slab flooring at

all floor levels,over 20 mm av.th.base of C.M. 1:6(1cement:

sand) laid over&joined with grey cement slurry incl. Rubbing &

polishing etc. comp.

50 24 (A) 25 mm. thick For all Floor 870.00 ₹ 989.45 S.M. ₹

Providing& laying granite slab18mmthick in flooring, treadsof

steps and landing laid on bed of 20mm thick cement mortar 1:6

coarsesand)or lime mortar 1:1.5 laid and finished with flush

pointing in white or colour cement including

rubbingandpolishingcomplete. (BasicRate:

Self Conducting Granite Stone river wash on new granite stone.

52 Expln. (Only finishing rate.) 50.00 ₹ 400.00 S.M. ₹

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp.

54 29 Labour charges for edge finishing for granite 1259.00 ₹ 43.43 R.M. ₹

Providing & fixing Glass Mosaic Tiles of 1" x 1" or 2" x 2"

with mesh on back as per consutant's instruction / in- charge

engineer to be fixed on 10 mm thk 1:1 cement mortar / N.S.A.

on any vertical / horizontal surfaces after getting ruff surface on

existing or new surfaces. All the joints to be filled with Colour

Self cement of matching to glazed tile. Along with flush pointing &

55 Expalined cleaning the surface etc. complete... 288.00 ₹ 3,309.00 Sq. Mt. ₹

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring,

treads of steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in

56 32- A white cement etc.com. For all floors 90.00 ₹ 857.42 Sq. Mt. ₹

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement

:3 sand) including necessary cement paste for fixing and joined

57 32 with white cement slurry etc. complete. For all floors 234.00 ₹ 887.64 Sq. Mt. ₹

Providing and laying coloured designer pattern glazed tiles of

the size 300 mm x 600 mm x 8 mm / 300 mm x 450 mm x

mm in skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

58 32- B cement slurry. 675.00 ₹ 1,426.95 Sq. Mt. ₹

DTS no. Description Qty. without GST & Unit

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24"

59 31 For Antiskid tiles. 215.00 ₹ 1,426.95 Sq. Mt. ₹

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1 cement : 3 coarse sand) and jointed with white cement

Providing and laying tile made out of composition of various

natural stone (No artificial) of appropriate thickness with mesh

on back side in Dedo laid on existing plaster (ruff required) and

fixed with Tile fixing chemical adhesive (Ultra Strong) of Roff /

Fosroc / Ultratech and tile joints to be filled with colour cement

Self slury matching with stone colour including rubbing etc. complete.

61 Explained (Plaster rate is not included in this item.) 252.00 ₹ 3,412.00 Sq. Mt. ₹

PART F:- WATERPROOFING WORKS

NOSTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years given on

a prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and

the like consisting of :

(a) I course of applying cement slurry @ 4.4 Kg./sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further

(c) Finishing top with stone aggregate 10mm to 12mm

NOSminal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

62 82 (Cement consumption 0.316 Bags / S.M.) 10.00 ₹ 296.00 S.M. ₹

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 Kg./sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement :

5 Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 & top smooth

finished with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical surface of

the parapet & other adjoining wall up to height of about 300 mm

in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra

Proviidng and filling in depression of bath and W.C. at all

floor levels , after completing plumbing work of pans, pipes,

Self traps etc. with cinder or fly ash as directed by engineer in

64 Explained charge. etc.complete. 23.00 ₹ 500.00 C.M ₹

Self Toilet / Wet Areas Chemical Waterproofing:

65 Explained Providing and carry out waterproofing treatment to Toilets, 75.00 ₹ 500.00 C.M ₹

Self Terrace Waterproofing on Existing Surfaces:

DTS no. Description Qty. without GST & Unit

66 Explained Providing & laying Brushbond Roofguard Premium- High build 1075.00 ₹ 500.00 C.M ₹

Providing cement vata (10 cm x 10 cm size) quarter round in

Self cement mortar 1:1 including neat cement finishing, watering etc.

67 Explained complete. 706.00 ₹ 23.68 R.M. ₹

Providing and laying broken China mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar crème out upto surface using white cement

including rounding off junctions and extending them upto

C.M. along the wall, clearing with water and oxalic acid etc. as

PART G:- OTHER WORKS

69 Explained Vegetation Removal from building 5.00 ₹ 1,500.00 JOB ₹

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm (of

jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track

member size 92 mm x 31.75 mm x 1.30 mm (of jindal section

no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of

size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of

0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

70 38 (A) Same as above but Colour anodized 110.00 ₹ 1,591.87 S.M. ₹

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt)

with sliding shutters of horizontal member size 40 mm x18 mm x

mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947,

@ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with

mm thick tranparent bronze colour tineted float glass with powder

coated aluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. complete for window.

71 39 (A) Same as above but Colour anodized 45.00 ₹ 1,705.67 S.M. ₹

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

72 40 (A) Same as above but Colour anodized 40.00 ₹ 2,414.00 S.M. ₹

Providing & Applying specifically developed to from flexible

water proof seals in cracked reinforced concrete with infiltration

of water (sealing pipe work which passes through concrete)-

mode of measurement up to 6mm thick in lineer mm. Procces:

Removing all dust & clean upper surface of pipe & inner surface

in concrte hole apply sweel chemical on all periphery &both

sides making same that the boundary formed is at last 5cm,cut

off the tip of the nozzle according to the size of bead

required,and pierce the membrane under the nozzle. insert the

cartride in an extrusion gun and apply the product directly into

concrete or element to be sealed

Self (B) 110 mm dia. 10.00 ₹ 584.18 NOS ₹

73 Explained (C) 160 mm dia. 10.00 ₹ 796.94 NOS ₹

Self Aluminum section Window opening and refixing with all

74 Explained necessary fix & fiting 10.00 ₹ 481.00 S.M. ₹

DTS no. Description Qty. without GST & Unit

M.S grill opening and re-fixing with necessary material and

Self welding / screwing / bolting / anchors, etc... required for Re-

75 Explained fixing the same. 500.00 ₹ 29.04 Kg. ₹

RCC Core Cutting is about making precise, circular cuts for

creating holes of required diameters for Rehabilitation in civil

works. The core drilling rod is fitted with diamond pieces at the

Self drilling end. The core cutting machine can be used for both

76 Explained horizontal and vertical hole making purposes.

Apply hacking on RCC member manual or by mechanical as

discoused by engineer incharge. 350 - 400 notches (dents) per

Self sqmt. Process of making the back ground rough before

77 Explained plastering for better bonding of mortar with RCC (Tacha) 400.00 ₹ 20.00 S.M. ₹

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

on both side with adhesives as specified by the manufacturers.

The laminate shall be as per approved shade & texture, of make

wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings For

Same as Above But Without Frame 298.00 ₹ 2,520.00 S.M. ₹

Providing & Fixing Nylon net (having net weight-0.065 kg/sq.mt)

Self in outside as well as inside plaster / terrace water proofing etc

79 Explained as direct by E.I.C 1933.00 ₹ 32.00 S.M. ₹

Providing and fixing double scaffolding system (cup lock type)

on the exterior side, up to seven story height made with 40 mm

dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube

challies, M.S. clamps and M.S. staircase system in the

scaffolding for working platform etc. and maintaining it in a

serviceable condition for the required duration as approved and

removing it thereafter .The scaffolding system shall be stiffened

with bracings, runners, connection with the building etc wherever

required for inspection of work at required locations with

essential safety features for the workmen etc. complete as per

directions and approval of Engineer in-charge .The elevational

area of the scaffolding shall be measured for payment purpose

.The payment will be made once irrespective of time duration of

scaffolding.up to specific work. (Payment will be consider for

Self time only. Scafolding will be required up to all works- Civil +

80 Explained Interior works gets completed) 10800.00 ₹ 230.00 C.M. ₹

Self Vertical lead for -11m excavated soil / debris / waist material to

81 Explained deposit at +1.00m on outside 50m to 100m horizontal lead. 100.00 ₹ 662.69 C.M. ₹

Carrige of material over distance exceeding 0.5 Km. .Including

loading,unloading and stacking (for all material other than

asphalt,cement & steel ) per trip 2.83 C.M

up to 2.0 km 0.00 ₹ 485.07 Trip ₹

Self up to 5.00 km 50.00 ₹ 821.99 Trip ₹

82 Explained up to 5.50 km 50.00 ₹ 689.01 Trip ₹

PART H:- PAINT WORKS

Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall / ceiling surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

83 41 and other foreign matter and sand papered smooth.

All Floor 10800.00 ₹ 40.59 S.M ₹

DTS no. Description Qty. without GST & Unit

Wall / Ceiling painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered

For every subsequent coat Extra over item no.above

Providing & Applying Anti Carbonation paint with exterior grade

acrylic priming coat including materials, equipments, scafolding for

Self any floor ht., cleaning, etc... complete as per below specs;

85 Explained 4400.00 ₹ 675.00 S.M ₹

Applying Priming coat over new steel and other metal surface after

over and including preparing the surface by throughly cleaning oil,

grease dirt and other foreign matter and scoured with brushed fine

steel wool, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter.

(A) For plain grill For all Floor

Painting two coat (inlcuding one coat of Primer) on new steel

and other metal surface with Epoxy paint, burshing to give an

even shade including cleaning the surface of all dirt, dust and

Self other foreign matters as per Insatruction by Architect and

87 Explained Engineer-in-charge. 4290.00 ₹ 182.00 S.M. ₹

Self Providing & applying Dholpuri finish, rain drop finish, rustic texture

88 Explained work with finished groove over existing plaster surface as per design 3080.00 ₹ 400.00 S.M ₹

Self Providing & applying Exposed Brcikwork & Exposed Concrete

89 Explained texture work with finished groove over existing plaster surface as 1320.00 ₹ 936.00 S.M ₹

PART I:- STEEL FABRICATION WORKS

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer- ncharge, (for

payment purpose only weight of stainless steel members shall

Self be considered excluding fixing accessories such as nuts, bolts,

90 Explained fasteners etc.). 2448.00 ₹ 450.00 K.G. ₹

Providing and fixing M.S. grills of required pattern to wooden frames

of windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or

91 36 (A) Plain / Decorative grill For all Floors 3841.00 ₹ 104.20 Kg ₹

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles

92 37 incl. applying a priming coat of Redlead paint etc. comp. 32.00 ₹ 5,865.10 S.M ₹

DTS no. Description Qty. without GST & Unit

Providing and fixing Rolling Shutters of approved make made of

mm wide M.S. laths inter locked together through their entire lenght

and jointed together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-pull operation

Self including the cost of hood cover and spring etc. complete

93 Explained (A) Shutters having width below 3.5 M. 14.00 ₹ 3,503.41 S.M ₹

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of red

(A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams, hip & trussed purlins

94 48 connected to common raffers & the like. 7085.00 ₹ 90.4786 KG ₹

Supply & fixing factory finished cold formed Light guage steel (GI)

frame sections confirming to SP:6 (5) 1980 at site or work including

riveted, bolted or welded in builtup for all type of sections ,in framed

work, cutting, hoisting, fixing in position and applying primer coat of

approved steel primer etc. complete as per structural designs &

directions of Engineer-in-charge.

95 48- A Rate is Incl. of 1% Cess. 20040.00 ₹ 114.4431 KG ₹

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc.

96 48- B as per Engineerin- charge.TATA / JINDAL / ASIAN Make 2520.00 ₹ 126.0000 KG ₹

Providing & fixing colouron galvaniced steel, zinc / aluminium allus

coated sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L

hook bolts and bolt 8mm dia with bituman and impet washer filled

with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata /Jindal or

97 49 equivalent) 100.00 ₹ 999.00 S.M. ₹

Providing & Fixing any color / pattern Alluminium Composite pannel

4 mm thick exterior grade with GI Fabrication Work, welding, anchor

/ fastner, SS Screws, Silicon, Sealant, finishing, etc... & complete…

GI Fabrication Work:

Supply & fixing factory finished cold formed Light guage steel frame

sections confirming to SP:6 (5) 1980 at site or work including riveted,

bolted or welded in builtup for all type of sections ,in framed work,

Self cutting, hoisting, fixing in position and applying primer coat of

Explained + approved steel primer etc. complete as per structural designs &

98 48-B directions of Engineer-in-charge. 500.00 ₹ 2,026.00 S.M. ₹

Self Providing & Fixing any color / pattern Alluminium Composite pannel

99 Expln. (ACP) 3 mm thick with Silicon, Sealant, finishing, etc... & complete... 92.00 ₹ 1,025.00 S.M. ₹

PART 02: INTERNAL BUILDING WATER SUPPLY AND SANITARY WORKS

Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat.

100 53 No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

101 54 F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101,

Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK

DTS no. Description Qty. without GST & Unit

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P.

copper connecting pipe 450 mm long and nuts, washer and brass

flange complete, including cutting and making good the wall where

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

ncluding jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera, Parry ware ,HindWare, Jaquar-Size- 350 x 500 x 390 mm

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278,

104 57 HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ 16.00 ₹ 3,282.00 No ₹

Providing & fixing Wall wash Hung basin with single hole for pillar tap

, Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

Providing & fixing white vitreous china urinal of size 450 x325mm as

per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT-

106 59 13261H ,HindWare BACK SMALL 60001 24.00 ₹ 2,476.00 No ₹

Providing & Fixing stainless steel recessed type Soap dish of

approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all

floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for

water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587,

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5) chamber & water tight C.I. cover with frame of 300mm x 300mm

size (inside) with weight includ. plastering smooth inside & outside

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps

(A) 100mm x 300mm Size -P type 3.00 1292.19 No ₹

110 66 (B) 150mm x 100mm Size- P Type 3.00 1246.92 No ₹

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension

,455 x 610 mm & 450 mm deep sewer trap chamber with 23 cm th'

B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than

kg. On top etc. comp. for single pipe. 0.00 3155.63 No ₹

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than

kg. On top etc. comp. Inside dimension,455 x 610 mm &450 mm

deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 6.00 242.39 Each ₹

DTS no. Description Qty. without GST & Unit

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1

of following nominal internal diameters incl. Testing of pipes and

joints etc. Comp ₹

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type "B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil

and waste discharge system at all floor levels incl. All fixtures like

bends, tees, shoe etc. jointed with resin of approved brand &

manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at

all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. (M.R.)

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral / Tulsi / Finolex make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating including the cost of

117 75 cutting and making good the walls. 30.00 558.36 No ₹

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Providing & fixing Z - clamps at all floor levels of approved design to

C.I. S.C.I. or PVC pipes including the cost of cutting holes & making

good the wall etc. Complete - 100 mm dia as per architect

(C) 110 mm dia to upto 150 mm dia 110.00 90.00 No ₹

Providing erecting and fixing double coated Sintex/Super/Reno PVC

(ISI) mark water tank of required capacity each with all necessary

120 78 fittings & connection etc. complete on terrace. 45000.00 3.95 Lit ₹

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE LW"integral

water proofingadmixture as water proofing agent to be mixed with

50 kg. cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom slab &

side pardi for Under ground Tank & Item incl. Necessary excavation

& refilling the available earth, 15 cm th' C.C 1:4:8 for bedding

concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per

design, 10mm.th. water proofing cement plaster in C.M. 1:3 with

smooth finishing,watering etc.Comp.to all inner face & bottom of

tank curing etc. comp. incl. Locking arrangement, outlet, inlet,

overflow & wash out pipe arrangement as necessary & C.I. Cover

0.60 x .045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineer-in-charge.

121 79 Under Ground water Tank 5000.00 5.46 Lit ₹

Providing and fixing C.I. Man hole cover 0.60 x 0.45 mt. Size having

122 81 weight not less than 35 Kg. etc. complete. 5.00 958.17 No. ₹

DTS no. Description Qty. without GST & Unit

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet &

fixed to wooden plugs with C.P.brass screws and washers etc. For all

Providing & fixing Flushing cistern PVC with fittings 12.5 litre high

level including of all types of fastner, screwing, bolting, fittings,

Self washers, adhesive, fixing with inlet & outlet pipes, etc… complete.

124 Expln. Rate is inclusive of 1% Cess. 34.00 684.75 No. ₹

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Self Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

125 Expln. F530004, Jaquar FLR-5041N 34.00 1755.00 No. ₹

Providing, Laying and jointing on true line and level UPVC pipe (SCH-

40) line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including

fittings make or equivalent as approved by angineer-in-charge. Pipe

shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Self (C) 32 mm dia. 75.00 119.15 R.M ₹

PART 03: BUILDING FIRE FIGHTING WORK

FIRE HYDRANT AND SPRINKLER SYSTEM

SITC of:Back pull out type-Single Stage,Self Priming,Centrifugal

Pump for Main Fire Pump with Electric Motor,Base frame and

Moc:-Casing-CI,Impeller-Bronze,Shaft-SS410,Sleeve SS410.

Pump shall be capable of furnishing not less than 150% of rated

capacity at a head not less than 65% of rated head the shut off

head shall not exceed 120% of rated head.

UOM:-Price Per Complete Set of Pump + Motor + Accessories.

Note:01.Minor civil work like tank hole/Core Cutting etc. are in

(MAKE:/KIRLOSKAR/LUBI/KSB)

(a) 450 LPM at 70 Mtr Head. 0.00 77966.11 Nos. ₹

(b) 900 LPM at 70 Mtr Head. 0.00 119915.26 Nos. ₹

(c) 1600 LPM at 70 Mtr Head. 0.00 190677.97 Nos. ₹

Self (d) 2280 LPM at 70 Mtr Head. 0.00 211864.41 Nos. ₹

125 Expln. (e) 2280 LPM at 90 Mtr Head. 0.00 237288.14 Nos. ₹

SITC of:Back pull out type-Single Stage,Self Priming,Centrifugal

Pump for Sprinkleear Pump with Electric Motor,Base frame and

Moc:-Casing-CI,Impeller-Bronze,Shaft-SS410,Sleeve SS410.

Pump shall be capable of furnishing not less than 150% of rated

capacity at a head not less than 65% of rated head the shut off

head shall not exceed 120% of rated head.

UOM:-Price Per Complete Set of Pump + Motor + Accessories.

Note:01.Minor civil work like tank hole/Core Cutting etc. are in

(MAKE:/KIRLOSKAR/LUBI/KSB)

(b) 900 LPM at 70 Mtr Head. 0.00 119915.26 Nos. ₹

(c) 1600 LPM at 70 Mtr Head. 1.00 190677.97 Nos. ₹

Self (d) 2280 LPM at 70 Mtr Head. 0.00 211864.41 Nos. ₹

126 Expln. (e) 2280 LPM at 90 Mtr Head. 0.00 237288.14 Nos. ₹

SITC of:Back pull out type-Single Stage,Self Priming,Centrifugal

Pump for Jockey Pump with Electric Motor,Base frame and

Moc:-Casing-CI,Impeller-Bronze,Shaft-SS410,Sleeve SS410.

UOM:-Price Per Complete Set of Pump + Motor + Accessories.

Note:01.Minor civil work like tank hole/Core Cutting etc.are in

(MAKE:/KIRLOSKAR/LUBI/KSB)

Self 180 LPM at 70 Mtr Head. 0.00 76271.19 Nos. ₹

127 Expln. 180 LPM at 90 Mtr Head. 0.00 105932.21 Nos. ₹

DTS no. Description Qty. without GST & Unit

SITC of:Diesel Engine Driven Standby Pumping System

complete with,diesel engine,Back Pull-out Type Single

Stage,Self Priming,Centrifugal pump,Couplings & Base-Frame:

MOC:Pump Casing-CI,Impeller-Bronze,Shaft-SS410, Sleeve

SS410. Diesel Engine includes 100 ltr diesel tank,battery,battery

charger,engine oil and coolant.

UOM:-Price Per Each Set.

Note:-01.Minor civil work like tank hole/Core Cutting etc.are in

(MAKE:/KIRLOSKAR/LUBI/KSB)

Self 1600 LPM at70 Mtr Head. 0.00 395762.72 Nos. ₹

128 Expln. 2280 LPM at 90 Mtr Head. 0.00 432203.39 Nos. ₹

Combined electrical auto control panel for main + sprinkler +

jockey + diesel pumps with Earthings and siren..

(MAKE:L & T/C&S/HAVELLS/SLEMENS)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(MAKE:- POLYCAB/RR CABLES/FINOLEX/HAVELLS/KEI)

a) 4 core 2.5 Sq. mm 0.00 268.76 Rmt ₹

b) 4 core 4 Sq. mm 0.00 361.2 Rmt ₹

c) 4 core 6 Sq. mm 10.00 506.71 Rmt ₹

d) 4 core 10 Sq. mm 0.00 672.76 Rmt ₹

Self e) 4 core 16 Sq. mm 40.00 983.47 Rmt ₹

130 Expln. f) 4 core 25 Sq. mm 10.00 1499.59 Rmt ₹

Sypplying, Installing, testing and commissioning of GI Pipes "C"

class confirming to IS 1239. 6 mm thick. with specials such as

Tees, elbows, flanges. Including cutting, Welding, fixing in / on

walls, ceiling by using suitable etc. as per drawing.

(MAKE:ASIAN/JINDAL/TATA)

(a) 150 mm nominal dia 0.00 2445.74 Rmt ₹

(b) 100 mm nominal dia 10.00 1800 Rmt ₹

(c) 80 mm nominal dia 30.00 1700 Rmt ₹

(d) 65 mm nominal dia 0.00 1228.82 Rmt ₹

(e) 50 mm nominal dia 250.00 949.16 Rmt ₹

Self (f) 40 mm nominal dia 300.00 550.85 Rmt ₹

131 Expln. (g) 25 mm nominal dia 500.00 444.92 Rmt ₹

Supplying and Painting the exposed G.I. pipes with one coat of

Zine Chromite primer with two coats of synthetic enamel paint of

approved colour / shade.

(MAKE:ASIAN /BERGER)

(a) 150 mm nominal dia 0.00 84.75 Rmt ₹

(b) 100 mm nominal dia 25.00 67.8 Rmt ₹

(c) 80 mm nominal dia 25.00 59.33 Rmt ₹

(d) 65 mm nominal dia 0.00 50.85 Rmt ₹

(e) 50 mm nominal dia 400.00 42.38 Rmt ₹

Self (f) 40 mm nominal dia 300.00 33.9 Rmt ₹

132 Expln. (g) 25 mm nominal dia 500.00 25.43 Rmt ₹

Supplying and fixing GI 'c' class pipe (Underground laying) with

screwed/flanged/welded as specified ,including short lengths

and specials as required , fixing upports, painting two coats of

approved enamel paints over a coat of pproved ZINC OXIDE

PRIMER after laying and testing to 13.5 g/sq.cm complete

including necessary protective tape, (pypkote 2mm thk IWL

antiicorrosive tapes) 2mm thk, 2 layers of tape, for buried iping

complete as specified.

(MAKE:ASIAN/JINDAL/TATA)

Self (a) 150 mm nominal dia 5.00 3050.85 Rmt ₹

133 Expln. (b) 100 mm nominal dia 0.00 2542.38 Rmt ₹

Providing fixing testing and commissioning of Oblique pattern

type stainless steel (ss 316) single headed External fire Hydrant

vale,ISI,with 63 mm dia.Female instantaneoue outlet conf. to

IS:5290,type A,including mating flanges,galvanised

nuts,galvanised bolts/studs,washers & gaskets 3 mm thick with

134 Self Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX) 0.00 8898.31 No. ₹

DTS no. Description Qty. without GST & Unit

Providing, fixing, testing and commissioning of 63 mm dia 15m

long RRL hose pipe with 63 mm dia. Male and female S.S.

couplings duly binded with GI wire, rivets etc. IS

135 Self Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX) 0.00 4067.8 No. ₹

Double door Hose Box made of G.I.Sheet with powder coated

finish of 750 mm x 450 mm x 250 mm in size and mounted on

136 Self Expln. structural support IS:636. 18 GAUZE 0.00 4237.29 No. ₹

Single door Hose Box made of G.I.Sheet with powder coated

finish of 550 mm x 450mm x 250 mm in size and mounted on

137 Self Expln. Wall IS:636.18 GAUZE 0.00 2118.65 Nos. ₹

Providing, fixing, testing and commissioning of Standard S.S.

Branch Pipe with nozzle of 20 mm nominal bore outlet as per

IS:903 suitable to fit with standard instanteneous type 63 mm dia

138 Self Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX) 0.00 1652.55 No. ₹

Supplying and fixing First Aid Hose Reel 19mm x 30mtr long

with MS construction spray painted in post office red,

conforming to IS 884 with upto date amendments, complete with

the following as required. Make: ISI: IS 884-1985.

139 Self Expln. MAKE: NEWAGE/AAG/SAFEX/MINIMAX/SWATI) 0.00 10593.23 No. ₹

Supply & installtion, testing & commissioning of Normax make

C.I. Heavy duty foot valve with flange, Nut bolts, Gaskets etc.

with necessary complete

accessories.(MAKE: ZOLOTO/AUDCO/SANT/NORMAX) ₹

140 Self Expln. (c) 80 mm nominal dia 0.00 8000 Nos. ₹

PROVIDING AND FIXING OF C.I. "Y" TYPE STRAINER WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT/AUDCO)

141 Self Expln. (b) 100 mm dia 0.00 10593.23 Nos. ₹

Providing and fixing of butterfly valve with ms flanges, gi nut, gi

bolt, gi waser & rubber gasket etc. ISI Mark Complete as

(MAKE: OSKO/AUDCO/NORMEX/SANT/ZOLOTO)

(a) 150 mm nominal dia 0.00 7203.39 No. ₹

(b) 100 mm nominal dia 2.00 5200 No. ₹

(c) 80 mm nominal dia 1.00 4491.53 No. ₹

142 Self Expln. (d) 50mm dia 5.00 4194.92 No. ₹

Providing and fixing horizontal type cast iron double flanged

Non Return Valve of approved quality S S SHEET confirming

(MAKE: OSKO/AUDCO/NORMEX/SANT/ZOLOTO)

(a) 150 mm nominal dia 0.00 13135.6 No. ₹

(b) 100 mm nominal dia 2.00 6350 No. ₹

143 Self Expln. (c) 80 mm nominal dia 0.00 5932.21 No. ₹

Poviding and fixing of forged brass ball valve screwed end

(suitable for working pressure of 25kg/sq.cm.)

(MAKE:SANT/ZOLOTO/NORMEX/AUDCO/HONEYWELL)

(a) 50 mm nominal dia 2.00 2525.43 Nos. ₹

(b) 40 mm nominal dia 0.00 1593.23 Nos. ₹

(c) 32 mm nominal dia 0.00 1338.99 Nos. ₹

(d) 25 mm nominal dia 2.00 830.51 Nos. ₹

144 Self Expln. (e) 20 mm nominal dia 0.00 728.82 Nos. ₹

Supplying and fixing approved make 15 mm dia with automatic

Air Release Valve with unions etc.

145 Self Expln. (MAKE: OSKO/AUDCO/NORMEX/SANT/ZOLOTO) 2.00 1822.04 Nos. ₹

Supply and installation of pressure switches of suitable range

for pump sets with required size piping, globe valves, plugs &

bronze check valves with orifice in clapper & supplemental air

chamber with complete assembly as per FM requirements.

146 Self Expln. (MAKE:- DANFOSS / HONEYWELL) 2.00 3728.82 Nos. ₹

Providing and fixing of dial type Pressure Guage having

mm dial & range of 0-14 Kg/cm2 with syphon and cock.

147 Self Expln. (MAKE:- BAUMER / H.GURU / EXCEL) 2.00 1864.41 Nos. ₹

Providing and fixing of rubber bellow with ms flanges, gi nut, gi

bolt, gi waser & rubber gasket etc. Complete as required

(MAKE:- EASYFLEX)

(a) 150 mm nominal dia 0.00 15254.24 No. ₹

(b) 100 mm nominal dia 2.00 11440.68 No. ₹

(c) 80 mm nominal dia 0.00 9067.8 No. ₹

DTS no. Description Qty. without GST & Unit

148 Self Expln. (d) 50mm dia 0.00 8220.34 No. ₹

Providing fixing testing and commissioning of Gun metal Four

way fire brigade inlet as per IS:904 having 63mm dia inlet with

blank cap and chain with necessary fittings flanges,nut bolts.etc.

149 Self Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX/SWATI) 0.00 6610.17 Nos. ₹

Providing fixing testing and commissioning of Gun metal Two

way fire brigade inlet as per IS:904 having 63mm dia inlet with

blank cap and chain with necessary fittings flanges,nut bolts.etc.

150 Self Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX/SWATI) 0.00 4745.77 Nos. ₹

Providing & Fixing of M.S. Structural work fabricated from

standard sections, (MS rounds, angles, channels etc) including

151 Self Expln. cutting, drilling, welding, including cost of fasteners etc. 1000.00 101.7 Kg ₹

Supplying & erecting carbon dioxide (CO2) fire extinguisher user

of following capacity with necessary clamps made from 50 x

152 Self Expln. (MAKE:KANEX/SAFEX/SECURE ZONE)

(a) 4.5 Kg Capacity 12.00 8127.12 Nos. ₹

Supplying & erecting ABC powder type Fire extinguisher as per

IS 4308 with necessary clamp for erection on wall.

153 50 (MAKE:KANEX/SAFEX/SECURE ZONE)

(b) 6 Kg Capacity 12.00 3059.33 Nos. ₹

Modular type automatic fire extinguisher :-

154 Self Expln. (MAKE:KANEX/SAFEX/SECURE ZONE)

(a) 5KG CAPACITY 2.00 2966.11 Nos. ₹

Supplying FIRE bucket round bottom of 9 ltr. capacity made out

of 24 gauge G.I. sheet with extra handle at bottom duly painted

Self white inside and Red out side with FIRE mark, filled with dry-

155 Expln. sand and kept on existing stand provided or hung on wall hook 3.00 350 Nos. ₹

Supply, installation, testing and commissioning of standard

response quartzoid bulb type sprinkler with screwed end

connection. Sprinklers shall be ul listed / fm approved with

15MM DIA - RATING 68 DEGREE (PENDENT TYPE) 600.00 398.31 Nos. ₹

Self 15MM DIA - RATING 68 DEGREE (UPRIGHT TYPE) 0.00 398.31 Nos. ₹

156 Expln. 15MM DIA - RATING 68 DEGREE (SIDEWALL TYPE) 0.00 398.31 Nos. ₹

SPRINKLER ALARAM VALVE

(MAKE:SANT/ZOLOTO/NORMEX/AUDCO/HD/TYCO)

Self SIGNAGES :-NIGHT GLOVE SIGNAGES ON 3MM PVC FOAM

158 Expln. SHEET 2000.00 6.78 Sq.Inch ₹

Fire Detection System

SUPPLY & INSTALLATIONS FIRE ALARAM CONTROL PANEL

(MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI)

(a) 2 ZONE Fire Alarm Control Panel 0.00 21355.94 Nos. ₹

(b) 4 ZONE Fire Alarm Control Panel 0.00 46779.67 Nos. ₹

Self (c) 2 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL 0.00 101694.92 Nos. ₹

159 Expln. (d) 4 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL 1.00 190677.97 Nos. ₹

Self Smoke Detectors

160 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 5.00 2177.97 Nos. ₹

161 Expln. Addressable Multisensor Detector With Base (Optical/thermal) 60.00 2415.26 Nos. ₹

Self Manual Call Point

162 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 0.00 3271.19 Nos. ₹

Self ADDRESSABLE TYPE MANUAL CALL POINT WITH BASE

163 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 9.00 3559.33 Nos. ₹

Self Sounder Cum Hooter

164 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 9.00 1322.04 Nos. ₹

165 Expln. ADDRESSABLE TYPE SOUNDER STROBE WITH BASE. 0.00 6762.72 Nos. ₹

Self ADDRESSABLE TYPE FAULT ISOLATOR WITH BASE.

166 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 1.00 3084.75 Nos. ₹

Self 2 Core 1.5 Sq. MM FRLS Cable

167 Expln. (MAKE:- POLYCAB/RR CABLES/FINOLEX/HAVELLS/KEI) 1200.00 101.7 Nos. ₹

168 Expln. 25 MM PVC Conduit 0.00 29.67 RMT ₹

169 Expln. Cable Laying Charges 1200.00 21.19 Nos. ₹

170 Expln. Conduit Laying Charges 0.00 16.95 RMT ₹

DTS no. Description Qty. without GST & Unit

Testing of Fire Fighting System, Preparation of Design &

Drawings Approval of Fire Hydrant & Entire Fire Protection

System from Local Fire Authority and any other relevant

statutory authority at initial (PRE- NOC / OPINION) and POST

CONSTRUCTION NOC or at various other stages of work,

including preparation of report / drawings as per fire authority

requirement. for pre opinion lison charges to be given to

indharge consultant. Contractor shall include cost of all liason

work which are not explicitly mentioned above but are

mandatory to have fire authority approval (any statutory charges

will be paid extra).

Self (Including Pre-NOC and Post Construction NOC from Fire

171 Expln. authority) 1.00 65000 Per Job. ₹

PART 04:- AREA DEVELOPMENT (EXTERNAL)

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc. Comp. (A) Loose or Soft soil Executed

With Mechanised Efforts / Machinaries

172 1 (1) Up to 1.5 Mt. depth

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc. Comp.

(A) Loose or Soft soil

Executed With Manual Labours

173 2 (1) Up to 1.5 Mt. depth

Box Cutting the road surface to proper slope and camber for

Self making base includinng removing the excavated stuff and

174 Expln. depositing on the road side slope as directed up to 50 mt. lead.

Self Add extra for Disposing off the excavated stuff of above items

175 Expln. for lead of (A) 50 m to 100 m

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse

sand:8 graded stone agg. 40 mm nominal size) & curing comp.

excl.cost of form work in

176 4 (A) Foundation and Plinth

Providing & laying Granular sub base (GSB) confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD including

all material, labour, machinery with all leads and lift etc.

177 101 complete.

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

178 92 skim powder floater, curing etc. complete.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.

179 10 comp. Upto G.L./P.L.

Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding. Item includes

levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants,

watering, cleaning etc. complete.

180 103 With / Without Color

DTS no. Description Qty. without GST & Unit

Providing 100mm thick readymade C.C. kerb of strength M-20

(size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc.

181 105 complete and as directed by engineer in charge.

Earth work for embankment including breaking clods, dressing

with all lead and lift and including watering rolling and

consolidation of subgrade in layers at O.M.C. to required dry

density including filling the depression which occur during the

Self process using power roller 8T to 10T.

182 Expln. (E) From Borrow area within 3.0 KM. lead

Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

183 13 consolidating etc. complete.

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

an even shade including cleaning the surface of all dirt, dust and

184 44 other foreign matters.

Providing and laying 200 micron plastic sheet on prepared sub

185 102 base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total

Self thickness with filling of epoxy sealent as directed by engineer in

186 Expln. charge

PART 05: INTERIOR FINISH & ACOUSTIC WORK

5.01: FALSE CEILING WORK

ACOUSTICAL CEILING WORKS @ FIRST FLOOR SEATING

providing & Fixing of Concealed / Microlook / Teguler edge

glassfibre core fully encapsulated ceiling tile in matt white color

of size 595mm x 1195 x 20mm having volume density

120Kgs/m3, weight 2.4kg/m2 which are suspended by using

0.3mm thick T24 T Grid framework. A wall angle with equal

flanges of 24mm, length 3000mm,0.4mm thk, fixed along the

perimeter of walls with the help of nylon sleeves and suitable

fasteners at 300mm centers. Then suspend the MainT with

flange width 24mm, height 38mm and length 3000mm, from the

soffit slab with help of soffit cleat and wire rod with leveling clip

at 900mm centers. A Spacer Bar, 800mm length, with pre

notched slots is placed above Main T24 at 1200mm centers in

staggered pattern to hold system. Concealed edge of size

600x1200x20mm shall then be slided onto Main T24 such that

short edges are staggered. 1185.00 6090 Sq. Mt. ₹

Self Approved Make : Saint Gobain, Knauf, Gyptech, Amazone or

187 Explained approved equal.

ACOUSTICAL CEILING WORKS @ FIRST FLOOR STAGE

providing & Fixing of Concealed / Microlook / Teguler edge

glassfibre core fully encapsulated ceiling tile in matt black color

of size 595mm x 1195 x 20mm having volume density

120Kgs/m3, weight 2.4kg/m2 which are suspended by using

0.3mm thick T24 T Grid framework. A wall angle with equal

flanges of 24mm, length 3000mm,0.4mm thk, fixed along the

perimeter of walls with the help of nylon sleeves and suitable

fasteners at 300mm centers. Then suspend the MainT with

flange width 24mm, height 38mm and length 3000mm, from the

soffit slab with help of soffit cleat and wire rod with leveling clip

at 900mm centers. A Spacer Bar, 800mm length, with pre

notched slots is placed above Main T24 at 1200mm centers in

staggered pattern to hold system. Concealed edge of size

600x1200x20mm shall then be slided onto Main T24 such that

short edges are staggered. 565.00 6438 Sq. Mt. ₹

Self Approved Make : Saint Gobain, Knauf, Gyptech, Amazone or

188 Explained approved equal.

FALSE CEILING : PLAIN GYPSUM CEILING

Self Providing & Fixing of 1800 mm. x 1220 mm. x 12.50 mm. thick

189 Explained 735.00 1001 Sq. Mt. ₹

DTS no. Description Qty. without GST & Unit

189 Explained MR / Plain Board Gypsum using 80 mm x 26 mm. x 0.50 mm. 735.00 1001 Sq. Mt. ₹

ACOUSTIC LAY IN GRID CEILING

Self Gypsum Plaster Board Perforated Acoustical Panels Providing

190 Explained and fixing of GYPTECH Perfona -G for Ceiling and wall

PVC LAMINATED GYPSUM LAY IN GRID CEILING

Providing and fixing in true horizontal level 600 mm. x 600 mm.

false ceiling in 24mm C.B Grid system manufactured by

GYPTECH using hot dipped galvanized steel section, exposed

surface with pre-coated capping, main tee of size 24mm x

mm., having 0.30 mm gauge at every 1200 mm. center to center

maximum and rotary stitched cross tee of size 24mm x 26 mm,

having 0.30 mm gauge at every 600 mm. c/c. and sub cross tee

of size 24mm x 26 mm, having 0.30 mm gauge at 1200 mm c/c.

and wall angle of size 24mm x 24mm., having 0.40 mm gauge

fixed to the periphery of the wall. The above grid is suspended at

every 1200mm c/c. in both directions using (Ceiling

Angle)19mm x19mm 2.0 mm. thick pre-straightened GI wire

laying GYPTECH VINYL LAMINATED GYPSUM PANEL Square

Edge ceiling tiles manufactured by GYPTECH, of size 595 mm x

595 mm x 12 mm thermal conductivity k = 0.16 W/m.K, having

moisture resistant & fire protection. having lighter,smoother and

more uniform. The vinyl finish on the gypsum panels seals out

moisture, bacteria, dirt and odors. Lay in the modulus for the

flush look. Approved Brands : Saint Gobain Gyproc, Gyptech,

Armstong or approved equal. 200.00 1251 Sq. Mt. ₹

Self Approved Brands : Saint Goabin Gyproc, Gyptech, Knauf or

191 Explained approved equal.

Trap Doors:Providing and fixing of TRAPDOOR for AC

units using TWO SHUTTERS OF 25mm flush door( Made from

pine framing AND AS PER DETAIL) for shutter & 18 mm ply for

framing and vertical support (AS PER DRAWINGS) of brand

Greenply or equivalent etc,ghana wood beading patti etc.

including all hardware items like 3 nos alllenkey lock ,stopper,

hinges, groove (if shown) with all materials, labour, lead and

wastage etc. complete. And Finished with different materials,and

complete the work satisfactorily as per instruction of architect or

Self Engineer-in charge.(BASIC AREA OF TRAP DOOR is 3.00 m. x

192 Explained 1.50 m. (As per Dwg.) = 4.50 sq.m.

Providing & Fixing of GI Microlook Lay in Plain metal ceiling

consisting of 600x600mm Lay-in tiles of galvanized steel in

Perimeter trim to be Armstrong wall angles of size

3000x19x19mm, secured to walls at 450 mm maximum. In case

of end tiles lesser than 600mm, use Armstrong lay-in end cap

for installation to have a Microlook effect on perimeters.

Installation to be carried out by Armstrong Trained Installation

team & Installation should be carried out as per Armstrong

recommended procedure.

ARMSTRONG SUSPENSION SYSTEM accessories

manufactured and supplied by Armstrong World Industries

consisting of M6 Anchor Fasteners with hanger hole, pre

Straightened Hanger wire of dia – 2.5 mm of 1.80 m length

having a tensile strength of 344-413 MPa and a minimum pull

strength of 110 kgs. (Adjustable hook clips of 0.7mm thick,

galvanized spring steel can also be used for installation purpose

Self as an additional accessory. The adjustable clip also consists of

193 Explained a 4 mm aquiline wire to be used with the main runner). 130.00 2369 Sq. Mt. ₹

Plywood Framing / Backing on the edges of the Openings

in Ceiling for fixing of Lighting Fixtures:

Providing & fixing 12 mm. thick BWR-IS: 710 as backing /

packing around openings of various fixtures in the ceiling &

supported and fixed with plywood battens with hardware as per

design & details or as instructed by the Engineer-in-Charge, at

Self ceiling level or on wall as directed, including removing debries

194 Explained and making the site clear and clean, etc. complete.

DTS no. Description Qty. without GST & Unit

Above ceiling ply box for 4 way AC fitting:

Providing and fixing 1.0 x 1.0 mtr. of ply box above ceiling (AS

PER DRAWINGS) using 18 mm ply for framing and 25 x 50 mm

aluminium pipe etc. including all hardware item, with all material,

labour, lead, scaffolding and wastage etc. complete.

Self Asymmetrically Structured Absorber (ASA) Acoustical Foam

195 Explained Panels - Pyramids / Wedges:

Thermo Acoustic Rock Wool Insulation:

Providing & fixing 50 mm. thick thermo acoustic 1000 X

mm." ROXUL" rock wool sheet, having 48 kgs. / m3 density,

with aluminium foil backing, resistant to moisture fungus &

insects, tie-up to the frame with g. i. binding wire, at ceiling / wall

in sheet / roll / blanket foam of selected standard approved

quality as approved by the Engineer-in-Charge, laid as per

Self details, including removing debries and making the site clear

196 Explained and clean, etc. complete.

5.02: Wall Panelling Work

Acoustical Wall Paneling

Providing & fixing in true line level 1200mm x 2400mm x 10mm

thick cnc harmonised perforated organic fibre and natural

mineral composite acoustical panel with 25mm drywall screw

fixed at 230mm centers to surface ribbed GI cold rolled section

channel of 120 micron zinc coating 0.5mm thick having knurled

edge of 51.5mm and two flanges of 26mm each with lips of

10.5mm placed at 610mm center, surface ribbed GI cold rolled

perimeter channel of 120 micron zinc coating 0.5mm thick

having two flanges of 20mm & 30mm and web of 26mm fixed

to the floor and surface ribbed GI cold rolled Intermediated

channel 120 micron zinc coating 0.5mm thick. The cavity to be

filled with 48kg/M3 density 50mm thick rockwool insulation. It

shall be lightweight, non-corrosive, chemically inert, odorless,

does not encourage growth of fungi & vermin, complying

highNRC & STC values for effective acoustic insulation. It

should minimize energy loss, cooling load and operating cost for

air conditioned building. All combination to be fixed firmly as per

manufacturer’s standard and provided lay out, including all

accessories, material & labor complete as directed by Architect

/ Engineer – in – charge.

Self Approved Brands : Saint Goabin Gyproc, Gyptech, Knauf or

197 Explained approved equal. 1472.00 4360.00 Sq. Mt. ₹

Acoustical Wall Paneling

Providing & fixing in true line level 1200mm x 2400mm x10mm

thick CNC grooved acoustical panel in grdiant pattern only. The

panel to be made from 2000g/m2 density 100% polyester staple

fiber, resistance to shrink, stretch, chemicals, mildew/fungus,

abrasion, should be comply with fire classification B-S1, d0 as

per EN - 13501, NRC Value up to 0.90 as per ARAI.It should be

a green material with asbestos-free, non-toxic and tasteless gas

under extreme temperature, protecting the ozone layer, non-

irritant and recyclable. Good insulation properties, to prevent

transmitting the heat from outdoor to indoor directly as partition

or and ceiling, saving 35% of energy, extending the life of air

conditioning.including all acceessories, material, labour etc. and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge. (Basic rate of PANEL-170 rs/sq.ft.)

Self Approved Brands : Artois,smart pannel,senses akustik, Techno

198 Explained Acoustics or approved equal. 1472.00 ₹ 5,517.00 Sq. Mt. ₹

Providing and fixing loop pile carpet of pile fiber: 100% Bcf

Polypropliene/olefin Yarn Construction & Type: Solution Dyed,

Loop Pile Graphic. Pile Weight & Hight: Minimum

Gm/Sq.Mt, 5mm (5 %+/-) Backing: Action Back Moth Proffing.

Fixing on the floor with synthetic ruuber adhesive make nerolac/

pidilite including all accessories, material & labor complete as

Self directed by Architect / Engineer – in – charge. Approved Make :

199 Explained Unitex / Divine / Hego ) 701.00 ₹ 2,600.00 Sq. Mt. ₹

DTS no. Description Qty. without GST & Unit

Wooden Panelling:

Providing and making of panelling on Wall & columns using

12mm ply, aluminium pipe for (2" x 1") framing(minimum grid

size of 600 mmx 600mm ), Ghana bidding patti (11/2" x

3/4")including all material, labour and hardware

complete,including scaffolding as per instruction of architect.

And Finished with different materials,and complete the work

Self satisfactorily as per instruction of architect or Engineer-in

200 Explained charge. 300.00 ₹ 1,975.00 Sq. Mt. ₹

Finished with Laminate:

Providing and fitting of 1 mm laminate (as per drawing &

selection) of brand greenlam,merinolam,century etc on ply

partition with 25 mm x 20 mm teakwood beading patti design on

top as per drawing,and 3mm x 3mm grooves if shown, all

material, adhesives,polish work,labour and hardware, waste of

materials complete as per instruction of architect.[Basic Rate of

Laminate : 2000rs./sheet (8' x 4')] and complete the work

Self satisfactorily as per instruction of architect or Engineer-in

201 Explained charge. 110.00 ₹ 1,198.00 Sq. Mt. ₹

Finished with Softboard:

P & f 12 mm. thick soft board, finished with fabric/s of selected

color, finish, texture, make, etc., having basic rate of Rs.

per meter of 1,200 mm. wide boards, and framed with teak wood

border, fixed on wall &/or already installed base paneling with

Self cap screws, including removing debries and making site clear

202 Explained and clean, etc. complete. 18.00 ₹ 4,520.00 Sq. Mt. ₹

Finished with Veneer:

Providing and fitting of Veneer of brand green,decowood,century

etc,(as per drawing & selection) on ply panelling with 25 mm x

20 mm teakwood beading patti design on top as per

drawing,and 3mm x 3mm grooves if shown including all

material, labour,polish work and hardware, waste of materials &

finished by ICA Clear PU (Basic Rate of Veneer :

Self rs./sqft.)and complete the work satisfactorily as per instruction of

203 Explained architect or Engineer-in charge. 100.00 ₹ 5,537.00 Sq. Mt. ₹

Finished with Mirror:

Providing and fitting of mirror/glass having thickness of min.

mm (as per drawing & approved shade)of brand

ais,modiguard,etc on ply panelling / on tile cladding including all

material, labour and hardware, waste of materials and complete

Self the work satisfactorily as per instruction of architect or Engineer-

204 Explained in charge. 60.00 ₹ 2,309.00 Sq. Mt. ₹

Finished with Tinted Mirror

(5mm thick Brown / Black Mirror Providing and fitting of

mirror/glass (as per drawing & approved shade)of brand

ais,modiguard,etc on ply panelling / on tile cladding including all

material, labour and hardware, waste of materials and complete

Self the work satisfactorily as per instruction of architect or Engineer-

205 Explained in charge. 50.00 ₹ 2,853.00 Sq. Mt. ₹

Finished with Wall Paper:

Providing & Supplying of WALLPAPER as per selection of

approved brand selected by the architect and complete as per

Self selection & directed by the Architect and approved by the

206 Explained Engineer in Charge.basic rate of wall paper is 150 / sq ft. 75.00 ₹ 2,405.00 Sq. Mt. ₹

PART 5.03: SECURITY SYSTEM

DTS no. Description Qty. without GST & Unit

Walk Through Metal Detectors:

Providing & fixing 6 mutual overlapping zones, Walk Through

Standard Metal Detectors, bearing model no."D1065S" by "ESSL",

having high density fireproof material & modular design, auto

calibration with self diagnostic program, having simultaneous alarm

from multi zones, with 100 sensitivity adjustable levels, having both

sound & LED alarm, LED indicators on both sides, automatic counting

of persons passing thru and alarm times, alarm strength indicator on

control panel, protected by password for operation, harmless to

human body magnetic floppies, recording tapes, etc., or approved

Self equal make as per the list of approved brands, as approved by the

207 Explained Engineer-in-Charge, etc. complete. 2.00 ₹ 84,440.00 Nos. ₹

Providing & installing Sensor Barriers, bearing model MTS-ESS-2 /

MTS-ESS-2D by "Motawame" or approved equal, of size 1150 X 450 X

1000 mm wide lane & Passage clearance 520 mm, requiring power

consumption of standby <30 W and operating <80W, having drive

Brushless DC motar / Inline direct Drive, configuration of fail safe /

fail lock and access time out adjustable to 1-10 sec. Two Flap wings

shall be made with Acrylic / Glass, having MCBF 10 million cycles,

MTTR <30 min and opening, closing time of 0.8 sec which is

adjustable as per the requirnment. Case Work shall be of Stainless

Self steel 304 / 316* / M.S. powder coated. The product shall be IP32 /

208 Explained IP54* rated, having the weight of 100 kg. 4.00 ₹ 5,19,029.00 Nos. ₹

PART 5.04: BLIND / CURTAIN SYSTEM

209 Explained Providing and fixing Fabric Roller blinds SW 2410 of SUNBLOCK™ with 75.00 ₹ 1,669.00 Sq. Mt, ₹

PART 5.05: DOORS

02-Hour Fire Rated Acoustical Doors with Frame, with D Handles and

Providing and fixing of Medium duty Shakti Hormann accoustic door

as per IS 16074 & IS 4351 made of pressed galvanized steel

confirming to IS 277 with the following specification. Door shall be

suitable for 39db, STC rating.

Door frame shall be single rebate step grooved profile of size 125 x

55mm made out of 1.20mm (18gauge) minimum thick galvanized

steel sheet. Frames shall be mitered and field assembled with self

tabs. Frames to have inbuild grooved sealing system and shall be site

fitted with EPDM gasket as standard. All provision should be

mortised, drilled and tapped for receiving appropriate hardware.

seal of approved make Athmer/Legancy to be provided on all three

sides of the frame jamb.

Frames should be provided with back plate bracket and anchor

fasteners for installation on a finished plastered masonry wall

Door leaf shall be 46mm thick step design fully flush double skin

door, insulated without vision lite. Door leaf shall be manufactured

from 0.8mm (20guage) minimum thick galvanised steel sheet. The

internal construction of the door should be rigid reinforcement pads

for receiving appropriate hardware. The infill material shall be

Min.100kg/sq.mt. high density rockwool/mineral wool material. All

doors shall be factory prepped for receiving appropriate hardware

and provided with necessary reinforcement for hinges, locks, and

door closers. The edges should be interlocked with a bending radius

of 1.4mm. For pair of doors integrated astragals has to be provided

on the meeting stile for both active and inactive leaf. Door shall be

equiped with additional seals like auto door bottom or Rebatted

threshould hormann make

DTS no. Description Qty. without GST & Unit

Door and frames shall be finished Pure Polyster Powder coated and

shall have passed minimum 500 hours of salt sprey test.

Rate shall include supply and installation of frame,shutter as a

complete assembly as mentioned in the door and hardware

All hardware, Smoke seals & glass including tapes cost will be paid

extra as per the hardware schedule.

Hinges, Lever handle b/b, sash Lock, Cy.Keyx TT ,Parrellel Arm DC

(hold open) , With smoke seal, Rebated Threshould all hormann

Approved Makes : Shakti, Hormann, Godrej, Accodor, Metaflex or as

Self Double Leaf Door 4.00 ₹ 1,05,046.00 Nos. ₹

210 Explained Single Leaf Door 4.00 ₹ 54,382.00 Nos. ₹

PART 5.06: READY-MADE FURNITURES

Manager's Table with Storage :

Providing and fixing of Manager's table including side table and

back storage with min. 6 nos of drawers, min. 10 nos. of

Shutters as per drawings and instructions provided, using ply of

brand greenply ecotech mr, century sainik mr, archidply etc.,

aluminium pipe for framing and finishing it with 6 MM CORIAN

of brand granium, samsung, dupont and 1mm unicore laminate

and 4mm veener as selected with clear pu finish of ica brand

selected by the architect (basic rate of unicore laminate is

per sheet and other 1mm laminate is 2000 per sheet, of size 8'0

x 4'0 and veener is 150 Rs per sq ft). All drawers and shutters to

be equiped with Godrej made loacking system, Black color

anodized aluminum 'F' profile handle including all material, m.s

fabrication Work,labour and hardware, waste of materials etc.

and complete the work satisfactorily as per instruction of

Self Architect or Engineer-in charge. (APPROX RUNNING LENGTH

211 Explained OF TABLE IS 3.00 MT.) 1.00 ₹ 2,71,496.00 Nos. ₹

L" Type Table for All Department Workstations (1.80 X 0.60)

Providing and fixing of L-TYPE office table of size 1.80 x 0.60 mt

and side storage of width 0.60 mt as per drawings and

instructions provided,using ply of brand greenply ecotech

mr,century sainik

mr,archidply etc,or aluminium pipe for framing and finishing it

with 1 mm unicore laminate and 1mm laminate of brand

greenlam or selected

by the architect (basic rate of unicore laminate is 3000 per sheet

and other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0)

including all material, m.s fabrication work,labour and hardware,

waste of materials etc and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.Approved

Self Brands: Unimaple,

212 Explained Featherlite, Bristol, Sunon, Steelcase. 6.00 ₹ 45,500.00 Nos. ₹

"L" Type Table for Ticket Office Manager (1.80 X 0.80)

Providing and fixing of L-TYPE office table of size 1.80 x 0.80 mt

and side storage of width 0.60 mt as per drawings and

instructions provided,using ply of brand greenply ecotech

mr,century sainik

mr,archidply etc,or aluminium pipe for framing and finishing it

with 1 mm unicore laminate and 1mm laminate of brand

greenlam or selected

by the architect (basic rate of unicore laminate is 3000 per sheet

and other 1mm laminate is 2000 per sheet, of size 8'0 x

4'0)including all material, m.s fabrication work,labour and

hardware, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

Self charge. Approved Brands: Unimaple, Featherlite, Bristol, Sunon,

213 Explained Steelcase. 2.00 ₹ 52,000.00 Nos. ₹

DTS no. Description Qty. without GST & Unit

Ticketting Counter at TICKET OFFICE :

Providing and fixing of Table / Desk for Ticketting counter (Min.

3.0 x 0.60 mt size- Linear / 'L' Shape) with Cut outs for inbuilt PC

Screen and 6mm. thk. Glass for viewing, and under desk

storage as per drawings and instructions provided, using

mm. thk. of brand greenply ecotech mr, century sainik mr,

archidply etc, aluminium pipe for framing and finishing it with

mm. Thk. CORIAN of brand granium, samsung, dupont and

mm unicore laminate or veneer of brand greenlam or selected

by the architect (basic rate of unicore laminate is 3000 per sheet

of size 8'0 x 4'0) including all material, labour and hardware,

waste of materials etc and

Self complete the work satisfactorily as per instruction of architect or

214 Explained Engineer-in charge. 1.00 ₹ 1,54,168.00 Nos. ₹

Executive Steel Filing Cabinet Table :

M.R. Providing 465 mm. long x 625 mm. wide x 725 mm. high

Executive Steel Filing Cabinet Table by "Jalaaram Furniture" or

Self make & as per the list of approved brands, as approved by the

215 Explained Engineer-in-Charge, etc. complete. 6.00 ₹ 13,536.00 Nos. ₹

Readymade Side Tables:

14.k.i. M.R. Providing 600 mm. X 450 mm. / 600mm. X 600 mm.

Side tables by "Gulmahor Lane, Joshmo, Steelcase, Godrej",, or

Self approved equal make as per the as per selection by the

216 Explained architect. 4.00 ₹ 9,848.00 Nos. ₹

Providing 900 mm. Long x 600 mm. wide x 455 mm. high

readymade center tables at VIP Room by "Gulmahor Lane,

Joshmo, Steelcase, Godrej", or approved equal make as per the

Self list of approved brands, as approved by the Engineer - in -

217 Explained Charge, etc. complete. 1.00 ₹ 19,695.00 Nos. ₹

Providing 750 mm. Diameter x 450 mm. / 750 x 450 mm

Self rectangle high readymade center tables by "Gulmahor Lane,

218 Explained Joshmo, Steelcase, Godrej", as per selection by the architect. 2.00 ₹ 15,756.00 Nos. ₹

1,200 mm. long x 1,000 mm. wide one-seater sofa: 2.00 ₹ 36,000.00 Nos. ₹

2,000 mm. long x 1,000 mm. wide Two-seater sofa: 2.00 ₹ 67,200.00 Nos. ₹

2,700 mm. long x 1,000 mm. wide Three-seater sofa: 2.00 ₹ 90,000.00 Nos. ₹

Pedestral Under Counter:

M.R. Providing 400 mm. long x 450 mm. wide x 640 mm. high

Pedestal Under Table by "Featherlite" or approved equal make

Self & as per the list of approved brands, as approved by the

223 Explained Engineer-in-Charge, etc. complete. 5.00 ₹ 7,788.00 Nos. ₹

PART 5.07:AUDITORIUM CHAIRS

DTS no. Description Qty. without GST & Unit

Standard Heavy Duty Auditorium chairs (Fix, auto tip up type)

Structural Frame: Back Rest frame should be of Mild Steel of size 25 X

3 mm flat bend as per ergonomic contour “S “bend to suit the body

shape. Seat frame should be of Mild Steel of size 20 X 5 mm flat “C

“bend type. Note: In main load bearing structure, no wood based

frame is permitted. Leg should be made of Sq. tube IS: 4923-1997-

50 X 25 mm, 1.63 thickness. Also, its side panel

SPRINGS: For Tip up mechanism, Coil Spring / Spring Steel IS:

1981 GRADE 2 Tested for 1,00,000 Cycles. Flexible PU FOAM:

Automotive Grade High Resilience-HR Polyurethane foam having FR

Grade with density of 48 ± 5 kg / M3. As per JIS K 6401.Thickness

Cushion: 130 +/- 20 mm tolerance; Backrest: 80 +/- 10 mm tolerance.

Hardness: Cushion: 120 (+ 30 / - 20) Newton; Backrest: 80 (+ 30 / -

PLASTIC TRAY: The seat & back frame should be nicely cover with

PPCP tray with 2.0 to 3.0 mm minimum wall thickness. It should

comply to sound acoustic properties. The seat numbering shall be

carried out on the back and the tip-up portion for the seat as

specified. End stand shall be covered by is covered with 6 mm

plywood with fabric lamination to conceal functional parts, and

Numbering of the row shall be carried out along the aisles as

ARM REST: PPCP with Cup holder OR PPCP without cup holder or

Wooden w/o cup holder as per selection.

Size & Weight of Chair: Length 750mm, Height 925mm, Seat height

450mm+_ 10mm,Whole Seat weight 15kg to 17kg, Seat depth is

448mm.Height from ground level is 445+/-10mm. Seat width is

457mm, 2 Nos per stand of size - M 8 X 75 mm expandable anchor

fasteners with chemicals bond grouting.

FABRIC: Heavy duty 100 % polyester dyed yarn with 3 mm ± 0.5 mm

foam backing with FMVSS 302 STANDARD.

Fabric and color shall be finally decided after approval of samples.

Self Warranty shall be of minimum 36 months from the date of

226 Explained commissioning against manufacturing defects. 1201.00 ₹ 8,905.00 Nos. ₹

PART 5.08: MISC. WORKS.

Self Providing and fixing first class indian teak wood 75 mm x 60 mm

228 Explained moulded hand rails in straight lengths complete 11.00 ₹ 490.00 R. Mt. ₹

Table750x750x 1000 mm The scope includes supply and

erection /installation of the item on site the table area of 19 mm

thick BWP plywood.The top surface is finished with high

pressure laminate of 1 mm thick the edges of all surfaces with

teak wood beading the thickness of top and legswith 40mm ,1no

keyboard tray with powder coated,) modesty Pamel :1 mm thick

laminate on 19 mm thick BWP Playwood, The rate including

Self labour ,All small Attachment ,and necessary item required to

229 Explained complete the job. as Per Instruction of Engineer in Charge. 2.00 ₹ 25,000.00 Nos. ₹

Clear PU polish on existing wooden stage:

Providing and applying ICA clear PU or Aquadur water-based

PU or as approved upto finishing (min 3 coats) including all

material, labour including scaffolding etc.and and measurement

of beading patti shall be in evaluated in square meters only

,complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

230 Explained Basic Rate for ICA wood clear PU= Rs. 175/- S.Ft. 400.00 ₹ 2,795.00 Sq. Mt. ₹

PART 06: EXTERNAL PLUMBING & DRAINAGE WORK

DTS no. Description Qty. without GST & Unit

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix

( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be

not less than 38 kg. On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover

231 69 instead of C.I. Cover 25.00 ₹ 2,681.76 No ₹

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.(i) for

232 Expln. 455mm x 610mm size. 10.00 ₹ 242.39 No ₹

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with bricks

having crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with

a floating coat of neat cement on walls and bed concrete etc.

(ii) Inside dimensions 500mm x 700 mm and 450mm deep

233 69 for pipe line with one or two inlets. 10.00 ₹ 3,624.51 No ₹

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.

234 Expln. (ii) for 500mm x 700mm size. 2.00 ₹ 262.24 No ₹

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In

C.M. 1:1 of following nominal internal diameters incl. Testing of

pipes and joints etc. Comp

Supplying and fixing reinforced concrete heavy duty non

pressure pipes with Spigot and Socket ended pipes or flush

jointed or collars for culverts carrying heavy traffic as per

IS458 - 1991 specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes)of class NP3 of

Self following internal daimeters.

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc. Comp. (A) Loose or Soft soil

EXECUTED WITH MANUAL LABOUR

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With

230mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand)

(1) A type depth 0.90 Metre for 150mm diameter sewer. 1.00 ₹ 10,920.76 Nos. ₹

238 107 (2) B type depth 1.50 Metre for 150mm diameter sewer. 1.00 ₹ 19,139.07 Nos. ₹

DTS no. Description Qty. without GST & Unit

Part 07: Road Side Compound Wall

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced concrete work

in : (A) Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in :

242 87 Up to G.L./P.L.Beams.

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 ₹ 7,665.60 C.M. ₹

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. D) Column,

243 109 Pillers, posts and struts

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.10 ₹ 10,658.16 C.M. ₹

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in

244 5 (A) Foundation and Plinth 3.10 ₹ 2,680.21 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

work incl. bending, binding & placing in position etc. comp. Upto

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm.in depth

246 12 consolidating each disposited layer by ramming and watering. 44.00 ₹ 130.39 C.M. ₹

(B) WORK ABOVE PLINTH LEVEL

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. (A)

(1)Having c/s area up to 0.08s.mt 1.00 ₹ 12,123.79 C.M. ₹

247 109 (2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 ₹ 10,658.16 C.M. ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A) Wall

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C.

work incl. bending, binding & placing in position etc.comp.

249 10 Ground Floor 1170.00 ₹ 76.21 Kg ₹

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

250 18 Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 12.00 ₹ 4,511.97 C.M. ₹

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing

coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good quality and size

of grain in elevation as per directed by

251 16 engineer incharge. 161.00 ₹ 324.00 S.M ₹

Providing & applying two coats of weather shield max paint (3 coats 452.00 ₹ 82.00 S.M ₹

252 17 may be required in case of darker colours.)of ICI Dulux or Apex

DTS no. Description Qty. without GST & Unit

Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead

paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and

254 48 jack rafters, purlins conneted to common rafters and the like 1210.00 ₹ 90.48 KG ₹

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter and

scoured with brushed fine steel wool, scrapers and sand paper

Self with ready mixed priming

256 Explained paint brushing red lead. 333.00 ₹ 35.00 S.M ₹

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

Self serviceable material and disposal of unserviceable from site of

257 Explained work with all lead and lift. 161.00 ₹ 19.57 S.M ₹

Part 08: Other Than Road Side Compound Wall

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced concrete work

in : (A) Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in :

261 87 Up to G.L./P.L.Beams.

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 ₹ 7,665.60 C.M. ₹

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. D) Column,

262 109 Pillers, posts and struts

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 ₹ 10,658.16 C.M. ₹

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in

263 5 (A) Foundation and Plinth 1.00 ₹ 2,680.21 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

work incl. bending, binding & placing in position etc. comp. Upto

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm.in depth

265 12 consolidating each disposited layer by ramming and watering. 19.00 ₹ 130.39 C.M. ₹

(B) WORK ABOVE PLINTH LEVEL

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. (A)

(1)Having c/s area up to 0.08s.mt 1.00 ₹ 12,123.79 C.M. ₹

266 109 (2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 ₹ 10,658.16 C.M. ₹

DTS no. Description Qty. without GST & Unit

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A) Wall

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C.

268 10 work incl. bending, binding & placing in position etc.comp.

Ground Floor 300.00 ₹ 76.21 Kg ₹

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

269 18 Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 0.00 ₹ 4,511.97 C.M. ₹

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing

coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good quality and size

of grain in elevation as per directed by

270 16 engineer incharge. 162.00 ₹ 324.00 S.M ₹

Providing & applying two coats of weather shield max paint (3 coats

17 may be required in case of darker colours.)of ICI Dulux or Apex 590.00 ₹ 82.00 S.M ₹

Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead

paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and

273 48 jack rafters, purlins conneted to common rafters and the like 0.00 ₹ 90.48 KG ₹

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter and

scoured with brushed fine steel wool, scrapers and sand paper

Self with ready mixed priming

275 Expln. paint brushing red lead. 468.00 ₹ 35.00 S.M ₹

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

Self serviceable material and disposal of unserviceable from site of

276 Expln. work with all lead and lift. 162.00 ₹ 19.57 S.M ₹

PART 09: INTERNAL ELECTRIFICATION WORK

Sub PART 01: Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

mtr length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as

Self (f) with medium class Rigid PVC pipe and accessories

277 Expln. erected concealed in wall/ceiling complete Cat III 580.00 ₹ 510.10 Point ₹

Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

ZFLR/HFFR PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered covered with

appropriate front plate modules erected on / in wall / ceiling for

open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.as per pipe erected with

following type of accessories.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

Self (f) with medium class Rigid PVC pipe and accessories erected

278 Expln. concealed in wall/ceiling complete 20.00 ₹ 176.04 Point ₹

DTS no. Description Qty. without GST & Unit

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

Self erected concealed in wall/ceiling complete

279 Expln. Cat.III 104.00 ₹ 708.41 Point ₹

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZFLR/HFFR PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat-III 104.00 ₹ 535.55 Point ₹

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Cat-III (ZFLR/HFFR) 37.00 ₹ 782.65 Point ₹

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire

with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected

Self concealed in wall/ceiling complete

280 Expln. Cat-III. (ZFLR/HFFR) 20.00 ₹ 915.21 Point ₹

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

Self with following type accessories

281 Expln. Cat. III (ZFLR/HFFR) 113.00 ₹ 270.43 Point ₹

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

Self 3 nos. 6A 5 pin Plug

282 Expln. CAT III 6.00 ₹ 1,133.22 No. ₹

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade ZFLR/HFFR PVC insulated multi strand

copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

Self flushed on wall/ceiling complete

283 Expln. Cat. III 40.00 ₹ 596.00 Point ₹

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured/ metallic/white front plate , modules

erected with necessary connections as per site situation

directed by Engineer In charge. (ZFLR/HFFR)

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat. III 12.00 ₹ 168.62 Each ₹

(4) TV Co-axial Socket outlet - Cat III 12.00 ₹ 168.62 Each ₹

(5) Electronic hum Free steps EME Fan regulator. CAT III 104.00 ₹ 418.90 Each ₹

(7) Blank Plate Single Cat. III 70.00 ₹ 26.51 Each ₹

(11) 6 Amps. Bell Push CAT III 6.00 ₹ 159.08 Each ₹

DTS no. Description Qty. without GST & Unit

Self (22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

284 Expln. Complete. CAT-III. 20.00 ₹ 522.83 Each ₹

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of following size .

(A) Supplying and laying UPVC cable trucking system

comprising unplasticised polyvinyl, chloride rigid material with

ignition free & flame proof confirming BS. With All necessary

accessories (Like elbow, tee, bank etc..) and measuring of

following sizes.

Self (1) 75 mm x 50 mm trucking 10.00 ₹ 277.75 Mtr. ₹

288 Expln. (3) 50 mm x 50 mm trunking 10.00 ₹ 188.87 Mtr. ₹

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

Self (e) 3 wire 6 sq. mm 1700.00 ₹ 200.99 Mtr. ₹

289 Expln. (h) 4 wire 6 sq. mm 1000.00 ₹ 260.58 Mtr. ₹

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor, insulated wire (HRFR)

conforms to IS-694, erected in existing pipe with 1.5sq. mm

copper conductor of same specifications for earth continuity of

following size.

Self [j] 3 wire 2.5 sq.mm 1800.00 ₹ 102.01 Mtr. ₹

290 Expln. [k] 3 wire 4.0 sq.mm 100.00 ₹ 140.39 Mtr. ₹

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to

C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

(b) Armoured [Jelly Filled]

291 Expln. (1) Ten Pairs 100.00 ₹ 125.24 Mtr. ₹

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made of

poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.

DTS no. Description Qty. without GST & Unit

Providing & erecting main Distribution (MDF) indoor type, back

mounted frame as per DoT standard approved with krone strips

293 Expln. (b) Suitable for 20 pair 1.00 ₹ 1,368.55 Nos. ₹

294 Expln. SITC of HDMI Cable 20 Mtr. 2.00 ₹ 13,363.06 Nos. ₹

295 Expln. SITC of VGA Cable 20 Mtr. 2.00 ₹ 6,681.53 Nos. ₹

296 Expln. SITC of Audio Cable 20 Mtr. 2.00 ₹ 6,948.79 Nos. ₹

Sub Part-02: Light Fixtures

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than

0.9, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt ,LED driver efficiency > 85 % ( fitting required

LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Cat-III 30.00 ₹ 165.64 Each ₹

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

CAT III 233.00 ₹ 373.70 Each ₹

Self (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

297 Expln. CAT III 20.00 ₹ 535.30 Each ₹

Supplying and erecting led lamps with following wattage capacity

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V

in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP

Self (b) 5 to 8 watts

298 Expln. CAT III 4.00 ₹ 112.11 Each ₹

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.9, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(i) 5-9 watts,Surge-2 KV

Cat.: III. 20.00 ₹ 220.18 Each ₹

(ii) 11-15 watts, Surge-2 KV, CAT- III 40.00 ₹ 427.23 Each ₹

Self (iii) 16-20 watts, Surge-2 KV- CAT- III 60.00 ₹ 589.84 Each ₹

299 Expln. (iv) 22-24 watts, Surge-2 KV- CAT- III 60.00 ₹ 758.51 Each ₹

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, CAT: III 40.00 ₹ 1,794.77 Each ₹

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

Self (vii) from 45 to 48 watts, 24" x 24", Surge-2 KV.

300 Expln. CAT III 40.00 ₹ 2,091.71 Each ₹

DTS no. Description Qty. without GST & Unit

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with

non integral suitable Driver complete

301 Expln. CAT III 300.00 ₹ 220.18 R.mt. ₹

(G) Step Light having Aluminium die cast and ABS Plastic

(i) 5 watts, Direct/Indirect luminaire

302 Expln. CAT III 60.00 ₹ 573.68 Nos. ₹

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

303 Expln. (i) above 40 to 48 watts- CAT III 16.00 ₹ 5,599.44 Nos. ₹

Sub Part-03 LT Switchgear, Distribution Boards & LT Panel

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete

Self erected in existing 16 G.M.S.housing

304 Expln. ICS=100% of ICU only. Cat III 1.00 ₹ 16,221.61 No. ₹

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. and

above at 415 V . having normal current rating 250A. with

variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned

Self copper & complete erected in existing 16 G.M.S. housing.

305 Expln. ICS=100% of ICU only. Cat III 1.00 ₹ 20,946.39 No. ₹

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA and

above at 415 V having Normal current rating 400A. with

variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. With all internal connections, spreader tinned

Self copper & complete erected in existing 16 G.M.S. housing.

306 Expln. ICS=100% of ICU only. Cat III 1.00 ₹ 25,228.79 No. ₹

Approved make standard Draw out type 4 Pole Air circuit

breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1

sec)Vsr=690 v, Ui=1kv ,impulse voltage=12 kv with following

type of relay and accessories.

(1) Manual Draw out type (MDO) with following type of relay

(B) with microprocessor Release with over load, short circuit,

earth fault protection and metering display in modular design

with LED display and Test Trip button facility, CTs and auxiliary

Self contacts, of following current ratings.

307 Expln. (i) 800Amp 50 kA Cat III 1.00 ₹ 1,34,219.91 No. ₹

DTS no. Description Qty. without GST & Unit

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and necessary busbar supports

with Aluminium busbar having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase &

neutral each Suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity 2.00 ₹ 2,602.77 Mtr. ₹

Self (B) Suitable for 200 Amp. Capacity 3.00 ₹ 3,061.31 Mtr. ₹

308 Expln. (C) Suitable for 300 Amp. capacity 3.00 ₹ 5,140.90 Mtr. ₹

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and necessary busbar supports

with COPPER busbar having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase &

neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.

(A) Suitable for 63/100 Amp. capacity 2.00 ₹ 4,421.78 Mtr. ₹

Self (B) Suitable for 200 Amp. capacity 3.00 ₹ 5,731.75 Mtr. ₹

309 Expln. (C) Suitable for 300 Amp. capacity 3.00 ₹ 8,539.55 Mtr. ₹

providing and erecting Miniature circuit breaker single pole 0.5A

Self to 2A system and having breaking capacity 10 KA to be erected

310 Expln. in existing box. confirming to IS 8828/1996 with ISI Mark 30.00 ₹ 270.68 Each ₹

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

Self confirming to IS 8828/1996 with ISI Mark .

311 Expln. Cat.III 50.00 ₹ 112.11 Each ₹

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

Self (A) 6 to 32 Amp. Cat.III 16.00 ₹ 299.97 Each ₹

312 Expln. (B) 40 Amp. Cat.III 16.00 ₹ 330.27 Each ₹

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity.

(a) 6 to 32 Amp. Cat-III 4.00 ₹ 595.90 Each ₹

Self (b) 40 Amp. Cat-III 4.00 ₹ 668.62 Each ₹

313 Expln. (c) 63 Amp. Cat-III 4.00 ₹ 737.30 Each ₹

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB

with 20 Amp. Plug socket, company fabricated powder coated

Self sheet steel enclosure erected as directed with connection.

314 Expln. [B] 15 Amp. / 5 Amp. Five pin Universal Socket- CAT III. 1.00 ₹ 660.54 Each ₹

Supplying & erecting approved make Electronics Starter and

relay for air conditioners in ABS plastic moulded housing.

Company fabricated with bakelite terminal for connection with

silver coating bimetallic contact in switching device for o/p with

following features.

(1) Low Voltage Protection below 130 V

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp.

(inverse time chara-)

Self (4) Indicating LEDs for AC on LV, HV, O/L, T/D

315 Expln. (5) With unique feature of 3 minute of time delay 20.00 ₹ 886.78 Each ₹

Self Plastic enclosure fitted with DIN rail suitable for incorporating

316 Expln. One / Two nos. MCB 20.00 ₹ 52.52 Each ₹

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for

ADD 20% more for concealed errection of distribution board. 3-

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30)

DTS no. Description Qty. without GST & Unit

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30)

(iii)8 way 3.00 ₹ 843.55 Each ₹

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30)

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

Self (b) sheet steel double door

317 Expln. (iv)12 way 3.00 ₹ 4,649.23 Each ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single phase 240 V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed.

(i) 25 Amps.DP, Cat-III 1.00 ₹ 1,969.50 Each ₹

Self (ii) 40Amps. DP, Cat-III 3.00 ₹ 2,235.13 Each ₹

318 Expln. (iii) 63 Amps. DP, Cat-III 3.00 ₹ 2,654.28 Each ₹

providng and erecting Approved make energy meter 3 phase

wire unbalanced load rating, 10A to 60 Amp. based on

ASIC(Application specific Integral Circuits) digital technology

with accuracy Class - 1 , temper proof, free from effect of

external magnetic field with 3 phase indication, earth & impulse

indication, 6 digit electro mechanical impulse counter, suitable

Self work on 120 V to 300V per phase 45-55 HZ, housed in robust

319 Expln. enclosure with erection as directed. CAT III 1.00 ₹ 2,696.70 No. ₹

Painting by cleaning, the surface and applying one coat of

Self primer and two coats of enamel paint for meter cup-board or

320 Expln. base plate suitable to match the wall finish 13.00 ₹ 146.45 Sq. mt. ₹

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally

supported on both side,

with internal and outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge

Self MS Sheet with angle iron legs 95 cm long made from 40 X 40 X

321 Expln. 6 mm thick MS angle. 1.00 ₹ 16,691.26 No. ₹

Providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to following size

of moulded case circuit breaker having CT ratio & MCCB rating

as following along with shunt trip 220V AC. with all internal

connections & complete erected in existing M.S.housing..

Sub PART 04: Earthing System

Self Providing and erecting Annealed bare Copper wire 8 to

323 Expln. SWG. 40.00 ₹ 794.87 Kgs ₹

Providing and erecting required size HOT deep Galvanised iron

Self strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel

324 Expln. board, Motors etc. using proper clamp. 120.00 ₹ 77.77 Kgs ₹

DTS no. Description Qty. without GST & Unit

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary

test report must be submitted.

(b)For Electrical installation up to 11 KV in normal soil.

Self Length of Pipe : 2.00 mtrs

325 Expln. Back filling Compound :1 no. Bag of 25 Kg. 6.00 ₹ 5,760.03 No. ₹

(c) For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in

Self Length of Pipe : 3.00 mtrs

326 Expln. Back filling Compound :2 nos Bags of 25 Kg. 2.00 ₹ 8,636.51 No. ₹

Sub PART 05: LT Cables & Cable Termination

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

Self following size of cables.

327 Expln. (b) 4 core 6 Sq. Mm 50.00 ₹ 126.25 Mtr. ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

Self (J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core) 20.00 ₹ 1,407.94 Mtr. ₹

328 Expln. (K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core) 20.00 ₹ 1,747.30 Mtr. ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

Self crossing or floor of following size of cables.

329 Expln. (b) 4 core 6 Sq. mm 400.00 ₹ 510.05 Mtr. ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

Self (A) 4 core 10 Sq. mm 100.00 ₹ 676.70 Mtr. ₹

330 Expln. (B) 4 core 16 Sq. mm 350.00 ₹ 987.78 Mtr. ₹

Making trench in soft soil of suitable width of 90 cms deep for

Self laying cable or locating the fault all over the run and backfilling

331 Expln. the same and making the surface as normal ground. 150.00 ₹ 55.55 Mtr. ₹

Providing & laying. R.C.C. hume pipe for cable to be laid

cms. below ground across the road crossing or on floor with

necessary material in an approved manner and making the

Self ground as per original.

332 Expln. (E)150 mm dia 15.00 ₹ 263.61 Mtr. ₹

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

Self (A)50 mm outer dia 120.00 ₹ 62.62 Mtr. ₹

333 Expln. (C))90 mm outer dia 60.00 ₹ 95.95 Mtr. ₹

DTS no. Description Qty. without GST & Unit

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

(c) 2 to 4 core 10 Sq. mm 50.00 ₹ 38.38 Each ₹

Self (d) 2 to 4 core 16 Sq. mm 40.00 ₹ 47.47 Each ₹

334 Expln. (E) 2 to 4 core 25 Sq. mm 35.00 ₹ 51.51 Each ₹

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Self (L) 400 Sq.mm. 20.00 ₹ 110.09 Each ₹

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

Self (I) 3 & 1/2 core 300 Sq. mm 5.00 ₹ 280.78 Each ₹

336 Expln. (J) 3 & 1/2 core 400 Sq. mm 5.00 ₹ 369.66 Each ₹

Supplying and erecting HYLAM sheet on existing angle iron

frame.for following thickness.

Self Supplying and erecting nuwood 12 mm thick on existing angle

338 Expln. iron frame. 10.00 ₹ 291.89 Sq. mt. ₹

Providing and erecting ISI marked PVC insulated PVC Sheathed

Flat flexible Submersible copper cable approved make of

Self following Size.

339 Expln. (b) 3 Core x 2.5 Sq. mm. 150.00 ₹ 104.03 Mtr. ₹

Sub PART 06: Fan & Related Accessories

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

Self with aluminium blades with , canopy & 30 cms. down rod erected

340 Expln. with earthing.(Make shall be approved by Engineer in charge)) 104.00 ₹ 1,948.29 Each ₹

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

Self M.S. Pipe down rod erected duly painted for fan complete with

341 Expln. proper insulation without leckage and earthing. 104.00 ₹ 108.07 Mtr. ₹

Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt lowers &

Self square frame.

342 Expln. 250mm with 1350 RPM Cat.II 10.00 ₹ 1,366.53 No. ₹

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM

Self [B] 380 mm dia 900 RPM, Cat II 15.00 ₹ 2,740.13 Each ₹

343 Expln. [D] 450 mm dia and 900 RPM. Cat.II 12.00 ₹ 3,339.06 Each ₹

344 Expln. Providing suitable M.S. louver shutter of the Exhaust fan. 27.00 ₹ 368.65 Each ₹

DTS no. Description Qty. without GST & Unit

Supplying and erecting approved make double ball bearing

oscillating type Heavy duty bracket fan with Aluminium Blades

A.C. 23OV. 50cy/s wall mounted with height adjustment and

rotary tilting device complete with guard, wall bracket,mounting

Self accessories as directed.

Sub PART 07: Motor & Starters

Supplying and erecting Direct On-line Electronics Starter with 2-

5/4-10/8-14/10-16 Amp. Rating relay (variable current setting)

directly operated in totally insulated elegant enclosure and

Amp. Rating power relay with start - stop button for single phase

operation up to 3 HP as per complete erected on P.W. Block

with following features.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Self Overload protection

346 Expln. Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II] 4.00 ₹ 1,603.88 Each ₹

Supplying & erecting approved make self-priming domestic

monoblock water pump with 1.5 H.P motor, suitable for

operation on 230 volts, 50c/s. AC supply with metallic flange,

and M.S. impeller delivery and following discharge 44 LPM at

Self 32 Mtr head suitable 25 mm dia delivery

347 Expln. CAT III 2.00 ₹ 9,314.22 Each ₹

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible

[C] For 3 HP 3 phase open well horizontal mono block pump set

Self suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head

348 Expln. suitable for 50/65 mm dia delivery pipe. CAT II 2.00 ₹ 15,707.52 Each ₹

Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of Engineer

in charge on site complete with wiring connection with existing

Self wires , with copper conductor from pump to upper and lower

349 Expln. tank. 4.00 ₹ 2,355.32 Each ₹

Supplying & erecting approved make motor control cubical

panel (Direct - on - line) made from 16 G. CRCA sheet duly

epoxy powder painted inside and outside with hinged doors and

locking, arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay, Automatic

water level controller, Ammeter, Voltmeter each with two way

selector switch incoming, wires duly socket crimped, main

contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L&T, Siemens or

Self BCH make only.

350 Expln. (a) DOL up to 5.0 H.P. 1.00 ₹ 7,722.46 Each ₹

Sub Part-08: Cable Trays

Providing and fixing approved make Perforated C type cable

tray. Made from sheet steel. The cable tray should be single or

double bended as per required and as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS 2629/4759.

with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification

and as per instruction of engineer in charge..

Providing and fixing approved make 'T' Junction for Perforated

C type cable tray. Made from sheet steel. The Junction should

be bended as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per instruction of

engineer in charge.. OF FOLLOWING SIZE

DTS no. Description Qty. without GST & Unit

Providing and fixing approved make '90° Elbow' for Perforated C

type cable tray. Made from sheet steel. The Junction should be

bended as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per instruction of

engineer in charge..

Self (3)150 X 50 X 1.6 mm Thick 90° Elbow 40.00 ₹ 163.62 Ea. ₹

353 Expln. (5) 300 X 50 X 2.0 mm Thick 90° Elbow 20.00 ₹ 245.43 Ea. ₹

Providing and fixing approved make Ladder type cable tray.

Made from M.S sheet. The cable tray should be bended as per

IS 2062/1079 shall be fabricated of double bended channel

section longitudinal members with single bended Channel

section. Rungs of members welded to the base of the

longitudinal members at 250 mm c/c spacing . as per IS and

shall be coated with hot dip galvanizing as per IS 2629/4759.

with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification

and as per instruction of engineer in charge..

Providing and fixing approved make 'T' Junction for ladder type

cable tray. Made from M.S sheet steel. The Junction should be

bended as per IS 2062/1079. with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer

(3)300 X 50 X 2.0 mm Thick 'T' Junction 10.00 ₹ 265.63 Ea. ₹

Self (5) 500 X 50 X 2.0 mm Thick 'T' Junction 10.00 ₹ 390.87 Ea. ₹

355 Expln. (6) 600 X 50 X 2.0 mm Thick 'T' Junction 8.00 ₹ 471.67 Ea. ₹

Providing and fixing approved make '90° Elbow' for ladder type

cable tray. Made from M.S sheet steel. The Junction should be

bended as per IS 2062/1079. with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer

Sub PART 09: Water Coolers & Purifire

Providing and erecting water cooler having storage capacity

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚ C within

a hour, The water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats, relay etc. complete

Self with necessary inlet & outlet connection. The body of water

357 Expln. cooler will be made from Stainless Steel. 2.00 ₹ 49,559.69 Nos. ₹

Supplying and erecting water filter cum purifier with ultra violate

Self technology. (Aquaguard / waterdoc model or equivalent

358 Expln. symphony/ crystal/HUL model) 2.00 ₹ 5,424.71 Nos. ₹

Sub PART 10: Liasioning Work:

Charges for doing liasioning work for obtaining the necessary

clearances from the Electrical inspector / competent Authorities

for the total Electrical installation, Elevator Inspection,co-

ordinating with various agencies. All necessary drawings,

calculations, test certificates, etc. as required by these

authorities shall be prepared and furnished by the EPC Vendor.

Any modification/rectification as required by these authorities

shall be carried out by theEPC Vendor at free of cost. The fees

Self required to be paid to these authorities for inspection shall be

359 Expln. borne by Owner on production of documentary evidences. 1.00 ₹ 50,500.00 Nos. ₹

Sub PART 11: LIGHTNING ARRESTER:

SITC of Vertical Air Termination Solid aluminium with Base-

mm dia and 1000 mm long. Air Termination Base tested for

conditioning, Ageing Test & Lightning impulse current withstand

test: 100 kA of 10/350µs waveform in an accredited Third party

Self laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with

360 Expln. MAST 34mm dia 3000 mm long- Cold Galvanized 2.00 ₹ 9,416.23 Nos. ₹

DTS no. Description Qty. without GST & Unit

SITC of Galvanized Steel Flat 25x6 mm thickness from earth

electrode directly in ground as required. Zinc coating: 500 g/m

square (Approx:70 micron coating) tested and used exclusively

Self for lightning protection earthing system and ring equipotential

361 Expln. bonding. 300.00 ₹ 154.53 R.mt. ₹

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile

steel electrode with 250 micron copper bonding & 1 bag of

Carbon fill Based environment friendly backfill tested as per IEC

62561-7 in NABL accredited Laboratory and suitable stainless

Steel double sided clamp. Eco Friendly rust proof heavy duty

weather proof Polyethylene Earth Pit Chamber with following

Self dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm

362 Expln. (height). 2.00 ₹ 5,992.33 Per Set ₹

Sub PART 12: MISC. WORK:

Providing and fixing printed instruction chart both in English and

Gujarati and duly framed with front glasses, for treatment of

Self person suffering from Electric shock with minimum 50"

363 Expln. diagonally size. 5.00 ₹ 130.29 Nos. ₹

Self Providing pair of rubber hand gloves suitable for working on

364 Expln. KV/22 KV supply. 4.00 ₹ 214.12 Nos. ₹

Supplying rubber matting of following thickness as per

Self IS:15652/IEC

SITC of Digital / PCM / TDM EPABX System having SMT

design, system with flexible universal slots. Inbuilt Auto

attendant facility, Minimum 15 Nos. conference, Analog

extension line, Calling GSM, E&M line, PRI / EI & VOIP program

me through Analog telephone digital key from Ethernet, public

address cord, shall have unrestricted simultaneous dialing

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of

Service, Quick Dial-Single Digit dialing of any two external

number, Once only ring device, Chairman / Secretary - Do not

disturb Facility, Power Down Mode, Hot Line, Hot Outward

Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up

& Call Transfer, Call transfer while Ringing with Voice Guide

System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base

routing Internet Ready Port, External Music Port, Call Budgeting,

Call Most Calculation (ASMDR), DID Direct Inverse Dialing,

External Music Input, Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]