for supply, installation and commissioning for MACHINERY AND EQUIPMENT for ELECTRICIAN workshop in the Govt. ITI Dalash

Amount

D.C. Shunt Generator with control panel D.C. Shunt Generator with control panel,2.5 KW, 220V &3phase Squirrel cage Induction Motor, 5HP, 440V with control panel & star delta starter (all meter Panel are Digital)

Motor-Generator (AC to DC) Squirrel Cage Induction Motor with star delta starter and directly coupled to DC shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. Induction Motor rating: 7.5 HP, 415V, 50 cycles, 3 phases. DC Shunt Generator rating: 5 KW, 440V (Output voltage varies 110-440v (all meter Panel are Digital) BIS Certified

D.C. Compound Generator with control panel including fitted rheostat, voltmeter, ammeter and breaker D.C. Compound Generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, 2.5 KW, 220V &3phase Squirrel cage Induction Motor, 5HP, 440V, with control panel & star delta starter (all meter Panel are Digital) BIS Certified

Motor Generator (DC to AC) set consisting of - Shunt Motor with starting compensator and switch directly coupled to AC generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. Set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling Shunt Motor rating: 5 HP, 440V AC Generator rating : 3-Phase, 4 wire, 3.5 KVA, 400/230 Volts, 0.8 pf, 50cycles (all meter Panel are Digital) BIS Certified

AC phase-wound slip ring Motor with starter switch 5 HP, 440 V, 3 Phase, 50 Hz (all meter Panel are Digital) BIS Certified

Synchronous motor with accessories like starter, excitation arrangements 3 Phase, 3 HP, 440V, 50Hz, 4 Pole BIS Certified

Thyristor /IGBT controlled D.C. motor drive with tacho-generator feedback arrangement 1 HP BIS Certified

Single phase Transformer, core type, air cooled 1 KVA , 240/415 V, 50 Hz

Three phase transformer, shell type oil cooled with Delta/ Star 3 KVA , 415/240 V, 50 Hz

Pillar Electric Drill Machine Motorized 12-20 mm Capacity, 1HP, 440V, 3 phase, Induction Motor with DOL starter, Bench Type BIS Certified

Motorised Bench Grinder 1 HP. 3 phase, 440V with DOL starter, Double side with smooth and rough wheel with Tool Base BIS Certified

Single Phase Capacitor Motor with starter switch 1 HP 240V 50HZ BIS Certified

Stepper Motor with Digital Controller BIS Certified

Shaded Pole Motor Fractional HP, 240 V, 50 Hz BIS Certified

Smart Meter 1 Phase - Smart Energy Meter

Smart Meter 3 Phase - Smart Energy Meter

EV Charger 3 phase input

EV Charger (Home) 1 Phase input

i7 COMPUTER OR latest VERSION (Alll-in One ) (Latest Version)Chipset-Intel Q Series, Chipset Number-Intel Q670,Expansion Slots M Dot2-2 or Higher, Processor Make -12 or Higher, Number of cores per Processor-12,Processor Base Frequency (GHZ)-1.4 0R Higher, Processor Description -Intel Core i7,Processor Number -Intel Core i7 12700 t or higher, Graphic Type -UHD Graphics 770,Size of VRAM in case of Integrated Graphics (MB)-128, Operating System (Factory Per Loaded -Windows 12 Professional, Recovery image Media -CD from the OEM/Stored in Partition of the hard Disk /USB/Drive from the OEM/On line /Cloud,OS Certification -Windows, Type of RAM -DDR4,DDR5,RAM Size (GB)-512 OR Higher, RAM Speed (MHZ)-3200 or Higher, Total NO.OF DIMM Slots Available -2,Number of DIMM Slots populated-1,RAM Expandability up to (using spare DIMM Slots in GB)-64,.Types of drives use to populate in internal Bays-SSD,Total SSD Capacity (GB)1TB,Display Size (Inches)-23.8,Display Type -Non Touch, Panel Technology -IPS,Display Resolution (PIXELS)1920*1080,Availability of Webcam integrated with Display-Yes, if Yes ,Number of speakers with Display-2,wireless Connectivity-Yes, type of Wireless Connectivity-Wi-Fi 6E AX211(2*2)+Bluetooth 5.3,Number of Ethernet Ports-1,Type of Ethernet Ports- Intel 10/100/1000 integrated, Bluetooth Connecitivity-Yes,Version of Bluetooth Available -5.3, No of USB Version 3 point 0/3 point 1,Gen1 Ports-2,No of USB Version 3Point1,GEN 2 Ports-3 or Moreno of USB Type C Ports-1 or More,HDMI Port-1 or more,DP Port-2 or more, Head phone out-Yes, Microphone in -Yes, Stand -Standard, Height Adjustable ,Power Supply -External, Power Supply Capacity (Watt)-120 or Higher, Mouse Connectivity-Wired, wireless or Higher, Type of Mouse-Optical Scroll, Keyboard Connectivity-wired, wireless or Higher, Type of Keyboard-Standard, on site OEM Warranty -(3Year)

1. Star Delta Starter – Semi automatic

Star Delta Starter – Fully automatic

Star Delta Starter - Soft starter

Auto Transformer type

Power Factor Meter Digital 440 V, 20 A, Three Phase portable box type

Kilo Wattmeter Analog /Digital 0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analog, portable type Housed in Bakelite case

Cables: Twisted Pair Non-Metallic Sheathed Cable Underground Feeder Cable Ribbon Cable Metallic Sheathed Cable Multi-Conductor Cable Coaxial Cable Direct-Buried Cable

Fuse HRC ( 32A)

Fuse Glass ( 32A)

Fuse Rewire Type ( 32A)

Earth Electrode Primary Electrode 2100x28x3.25mm Secondary Cu Strip 20x5mm

Load Bank ( Lamp / heater Type) 6 KW, 3Ph

Touch Based Smart Interactive White Board, Size/Dimension 6*4 1) Touch Technology Infrared touch technology/Sample Rate- 120 fps Touch Points - 10Touch /Touch Accuracy = +3mm/Response time - =8ms/Size - 82”/Aspect Ratio -4:3 Wall mount-Supported/Mobile stand - Optional /Firmware Upgradability- Yes/Device Type - Touch (with gesture support per OS) or, Mouse(click, drag, double click,right click) Calibration 4 point, 9 ,16 point, 25 point Operating Systems Windows XP/Vista/7/8/8.1/10 Linux(V2.4 or above), Android (V4.0 or above) Mac OSX(V10.4 or above) Input Method -Finger or any other Opaque object/ Transmittance-100% without glass/ Touch durability-Unlimited/ Touch Object Diameter>10mm/ Touch Activation Force-No pressure required / USB Reported Resolution-32768 * 32768 / Interface type-USB2.0 (Full Speed) / Plug and Play-Supported / Driver-Driverless / HID-Supported / Power supply-Powered by USB / Power Requirements-DC5V+5%@500mA / Power consumption-Average power consumption<1.W / Operating Temperature-20°C ~60°C / Storage Temperature-20°C ~ 60°C / Operating Humidity-20% ~90% / Storage Humidity-10% ~90% / Drift-No drift in operating temperature range / ESD-Per EN61000-4- 2:Level 4, contact / discharge 6KV, air discharge 8KV / Mounting Substrate Flatness ±2.5mm

DC Series Motor coupled with spring balance load 2.5 KW, 220 Volts BIS Certified

DC compound Motor with starter and switch 2.5 KW, 220 Volts BIS Certified

Dule Power Transfer Switch 320 V 63 A Changeover switchh single drive interlock function for controll equipment operation Mode on off Current Reating 63 A Operating Voltage 230V Conector Type Auxilary Switch Type Push Button

Thermal Over load Relay L&T 9-20A

DC Series Motor coupled with spring balance load 2.5 KW, 220 Volts BIS Certified

DC Shunt Motor 2.5 KW, 220 V BIS Certified

DC compound Motor with starter and switch 2.5 KW, 220 V BIS Certified

AC squirrel cage Motor with star BIS Certified

D.E> metric Spanner Double Ended 6 - 32 mm

battery charger 0 - 6 -9 12 -24 -48 V, 30 amp

phase Sequence Indicator 3 Phase ,415 V

Rheostate(sliding type 0-300Ohm,5 Amp)

Rheostate(sliding type 0-100Ohm, 2Amp)

3- point D.C Starter For 2.5 KW DC Motor

4- point D.C Starter For 2.5 KW DC Motor

Thermometer Digital C-C-150C

Soldering Iron 25 Watt, 230

Soldering Iron65 Watt and 230 Volt

Soldering Iron 120 Watt, 230 Volt

Reflective Safety Jacket Colour Green, (size-XL,M,L)

Reflective Safety Jacket Red, (size-XL,M,L)

Reflective Safety Jacket , Blue (size-XL,M,L)

Relay- Cut out Relays 16 A 415 V

Relay- Reverse current 16 A 415 V

Relay- Over current 16 A 415 V

Relay- Under voltage 16 A 415 V

Crimping Tool Hydraulic 16 sq mm to 95 sq mm(BHCT)

Portable Electric Drill machine Hammering 0.-32mm capacity 750w,240V with Chuck and key (Bosch/Dewalt/HIT chuck and Key

Electrical Machine Trainer MACHINE SET- ( 1) MG set cum Pony brake Arrangement (Facility of Direct & Indirect loading methods) • 1HP DC Machine Suitable to run as DC Shunt motor/ DC Series motor/ DC Compound motor Suitable to run as DC Shunt Generator/ DC Series Generator/ DC Compound Generator • Coupled with flexible coupling having proximity speed sensor & mounted on MS Base with • 1HP Synchronous Machine Suitable to run as Synchronous Motor in motor mode Suitable to run as Synchronous Alternator in generator mode. • Pony Brake Loading arrangement consisting of water cooled pulley,friction belt, dial, screw arrangement. 2) Control Panel for above MG set MS Fabricated, powder coated, table top cabinet consisting of below components Inbuilt AC to DC Rectifier, MOTOR OPEARTIONS 2Point DC Starter for DC Series motor operation 3 Point DC Starter for DC Shunt motor operation 4 Point DC Starter for DC Compound operation 1 DC Thyristor Drive for Speed control of (DC Shunt motor or Series motor or Compound motor) Field Resistance included for Providing speed control by 10%. Incoming AC MCB, AC CombimeterDigital AC Voltmeter, AC Ammeter, DC Voltmeter, DC Ammeter, RPM Meter, 1Phase resistive load in steps 3 Phase resistive load in steps DOL AC Starter for 3Phase Synchronous motor Field exciter for DC Generator operations consisting of variac All Banana terminals brought out for making/ braking connections, Lamps, switches & Fuse. MACHINE SET -2 1) Repulsion motor with Pony brake Arrangement • 0.5HP AC Repulsion motor 230V AC, with speed reversal knob provided on rear end • Mounted on MS Base with proximity speed sensor • Pony Brake Loading arrangement consisting of water cooled pulley, friction belt, dial, screw arrangement. 2) Control Panel for above MG set MS Fabricated, powder coated, table top cabinet consisting of below components MOTOR OPEARTIONS Incoming AC MCB, Digital AC Voltmeter, AC Ammeter, RPM Meter, DOL AC Starter All Banana terminals brought out for making/ braking connections, Lamps, switches & Fuse. MACHINE SET- 3 1) AC Single phase Induction motor with Pony brake Arrangement • 0.5HP AC Squirrel cage Induction motor 230V AC Suitable to run as CSIR & CSCR • Mounted on MS Base with proximity speed sensor • Pony Brake Loading arrangement consisting of water cooled pulley, friction belt, dial, screw arrangement. 2) Control Panel for above MG set MS Fabricated, powder coated, table top cabinet consisting of below components MOTOR OPEARTIONS Incoming AC MCB, Digital AC Voltmeter, AC Ammeter, RPM Meter, DOL AC Starter All Banana terminals brought out for making/ braking connections, Lamps, switches & Fuse. MACHINE SET- 4 1) AC Three phase Induction motor with Pony brake Arrangement • 0.5HP AC Squirrel cage Induction motor 415V AC Suitable to run as Dahlander type 2pole & 4pole speed • Mounted on MS Base with proximity speed sensor • Pony Brake Loading arrangement consisting of water cooled pulley, friction belt, dial, screw arrangement. 2) Control Panel for above MG set MS Fabricated, powder coated, table top cabinet consisting of below components MOTOR OPEARTIONS Incoming AC MCB, Digital AC Voltmeter, AC Ammeter, RPM Meter, AC VVVF Drive for speed control DOL AC Starter All Banana terminals brought out for making/ braking connections, Lamps, switches & Fuse. MACHINE SET- 5 1) Universal motor with Pony brake Arrangement • 0.5HP Universal motor 230V AC/DC 10000 rpm • Mounted on MS Base with proximity speed sensor • Pony Brake Loading arrangement consisting of water cooled pulley, friction belt, dial, screw arrangement. 2) Control Panel for above MG set MS Fabricated, powder coated, table top cabinet consisting of below components MOTOR OPEARTIONS Incoming AC MCB, Digital AC Voltmeter, AC Ammeter, DC Voltmeter, DC Ammeter, RPM Meter, DOL AC Starter 1 DC Thyristor Drive for Starting and Speed control of Universal motor All Banana terminals brought out for making/ braking connections, Lamps, switches & Fuse. MACHINE SET 6 (1) AC Three phase Wound Rotor Slipring Induction motor with Pony brake Arrangement • 0.5HP AC Slipring Induction motor 415V AC • Mounted on MS Base with proximity speed sensor • Pony Brake Loading arrangement consisting of water cooled pulley, friction belt, dial, screw arrangement. 2) Control Panel for above MG set MS Fabricated, powder coated, table top cabinet consisting of below components MOTOR OPEARTIONS Incoming AC MCB, Digital AC Voltmeter, AC Ammeter, RPM Meter, DOL AC Starter AC VVVF Drive for speed control Rotor Resistances for speed variation in steps All Banana terminals brought out for making/ braking connections, Lamps, switches & Fuse chuck and Key

ELCB 3 phase 25 Amps, double pole ,1 Δn 30 mA

Laboratory Type induction Coil 1000 W

3 Phase Star Delta Starter Timmer 3 Sec.to 30 Sec 240 to 415V/10A

Three Phase 15KW Distribution Panels, IP Rating: IP55 Product Specification Power -15KW Material- Mild Steel Capacity- 15KW Dimension- Customized Phase Three Phase IP Rating IP55 Execution- Standalone Push Button Illuminated Automatic Grade Automatic Voltage- 415 Ambient Temp.- 55 Temperature -55 Input Voltage- 415 Rated Current -100 Height Of Board -2000 Relative Humidity- 55 Output Voltage- 415 Bus bar Rating -500A Working Temperature -50 Minimum Order Quantity- 1 MCCB 200A=1 Nos.BUS Bar 200 A=1 Nos. Digital Amp.Meter and Volt meter 0-500V, Indicator RYB =1 Nos. Isolator 40A=4P =6Nos. Isolator 63A 4Pole =6Nos.Isolator 40A 2pole =6 Nos. Capacitor Bank 20KVAR =1Nos. Temperature Meter =1 Nos. Frequency Meter 50HZ.=1 Nos. Earth Strip =1 Nos.

infinity solution (BID ID -498131)

Hi tech construction 27/1, Talyahar, Teh. Sadar, Distt. Mandi (H.P) (BID ID -498161)