improvements to cup boards, dharmagiri, tirumala

Demolishing and disposal of unserviceable materials within 100 meters lead - Unreinforced cement concrete up to 15cm thickness

-do- up to 15 cm thickness

Demolishing and disposal of unserviceable materials within 100 meters lead - Unreinforced cement concrete more than 15cm thickness

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres

-do- for Brick work

Dismantling, clearing away and carefully stacking materials useful for re-use, stone masonry in cement mortar

Dismantling doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metres lead. Not exceeding 3 sq.m in area

Not exceeding 3 sq.m in area

Dismantling, clearing away and carefully stacking materials useful for re-use, through scraping of old plastered surface

Clean removal of cement plaster from walls and raking out joints 20 mm deep and removing debris.

Conveyance of excavated surplus earth/debris to a distance 2 kms from the site of work at the place specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.

Supply of Plain float glass 5 mm thick to the required sizes as directed during execution.

Supply of Pin headed glass 5 mm thick to the required sizes as directed during execution.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.

Ordinary soil-Manual means up to 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Construction of Brick Masonry in CM(1:5) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in CM(1:4)using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete

High polished granite Tan Brown granite18 to 20 mm thick 2.43 size

Plastering in Cement mortar in CM (1:3)12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar in CM (1:5)12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar in CM (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Finishing the flooring with Granolithic cement Concrete (1:1:2) for 20 mm thick using 6mm to 12mm size HBG crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m X 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost and conveyance of all materials like cement, metal, sand and water etc., complete for finished item of work.

Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply).

Supply of glazed red or white full body ceramic wall tiles of size 200x300mm / 245mmx325 mm and thickness 6mm 1st quality conforming to IS:13711 , IS:13712 , IS:13630 (Parts1to15) of any colour and finish in all shades and designs

Supply of glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

'Supply and fixing of 10 mm wide PVC edge beading including cost and conveyance of all materials and incidental charges, etc., complete.

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.(Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

- do -'Supply of Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Supply and fixing of Cement Bonded Particle Board (IS 14276) cup board frames and shutters and using 16mm Cement Bonded Particle Board duly painted both sides with one coat of primer and two coats of synthetic / enamel paint of approved shade and brand including fixing of hardware like M.S. powder coated Piano hinges of size 18mm x 18mm, brass ball catches,Aluminum tower bolts and handles , Godrej locks, Fevicol, screws and nails including cost and conveyance of all materials, labor charges, all incidental and operational charges etc., complete for finished item of work at site as per the directions of Engineer in Charge.

Supply of Teak wood reapers including wrought and put up charges as directed during exection

Polishing the wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.

Painting Two coats for New wood work with Ready mixed Synthetic Enamel paint in all shades -Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/litre approved colour and make over ready mixed wood primer ( total three coats) including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete..

-do- Two coats for New wood work & new plastered surface including primary coat

Supply of the following Aluminium and Mild steel fittings for doors and windows including cost and conveyance of all materials etc., complete.

Supply of ANODISED ALUMINIUM ALDROPS sliding door bolts of size 12 mm x 250 mm

Supply of Anodised Aluminium tower bolts 10 mm dia x 75 mm Long with ISI Mark IS 204

Supply of Anodised Aluminium tower bolts 10 mm dia x 200 mm Long with ISI Mark IS 204

Supply of Anodised Aluminium tower bolts 10 mm dia x 100 mm Long with ISI Mark IS 204

Supply of Anodised Aluminium Door handles IS 208 75 mm long

Supply of Anodised Aluminium Door handles IS 208 150 mm long

Supply of Aluminium Butt hinges IS:205 of 75 mm long

Supply of Aluminium Butt hinges IS:205 of 100 mm long

Supply of Aluminium Butt hinges IS:205 of 150 mm long

Supply of Anodised Aluminium Hook IS:205 Ring of 6 mm x 100 mm long

Supply of Anodised Aluminium Heavy Duty door stopper

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Painting priming coat with ready mixed Cement primer (Water Thinnable) for new plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

Cement primer for interior grade-1 -new work

Cement primer for interior grade-1 -old work

cement primer for exterior grade - 2 for New work

cement primer for exterior grade -2 for old work

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls.- for old work

Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

-do- Two coats for External walls - new work

-do- Single coat for External walls - old work

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

-do- single coats for internal walls - Old work

-do- Two coats for internal walls - new work

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- single coat for old iron work & old plastered surface

-do- single coat for old wood work

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block 550 x 400 mm - Single C.P. Pillar cock

Supplying & Fixing Orissa Pan white glazed W.C of Size 580x440 mm 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap ISI Mark or equivalent brand approved by the department

Supply & fixing of NP coat hook

Providing Unplasticized PVC SWR Rain water downfall pipes for the following dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

- do - 110 mm dia PVC pipe with wooden block of size 200mmx50mmx50mm

Supply, laying, fixing and commissioning the following PVC/SWR pipes and fittings (As per ISI standards) - 6 Kg/Sq.cm (Type-B) - including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice.

-do- 110mm dia single socket PVC pipe

-do- 75mm dia Single Socket PVC pipe

-do- 160 mm dia double Socket PVC pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

-do- 15.90mm OD Pipe - SDR 13.5

-do- 22.20mm OD Pipe - SDR 13.5

-do- 28.60mm OD Pipe - SDR 13.5

-do- 34.90mm OD Pipe - SDR 13.5

supply & fixing towel rod (CP) of 24'' long and 3/4'' dia

supply & fixing NP soap dish heavy type with NP Screws

Supply of 110 mm dia Door Bend 87.5 Degree of U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Plain Bend 87.5 Degree U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Tee of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Y of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Y (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm x 75 mm dia Reducer of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Vent cowl of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Door Bend 87.5 Degree of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Plain Bend 87.5 Degree of U.V. resistant UPVC /SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Tee of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Y of U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Y(With Door) of U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia 45 degree Bend of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of Round Jali

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Flooring with cement concrete floor tiles of 25mm thick of following sizes set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work.

Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades.

Supply and fixing of Glow Sign Radium stickers name plate / sign (or) instruction boards using 3mm thick Acrylic white sheet as back ground and glow sign radium sticker one layer for letters of different sizes as directed during execution including cost of 3mm thick Acrylic sheet, radium sticker and all labour charges for computer design and cutting, pasting and fixing the boards to walls.

Finishing the flooring with flamed finished granite stone 18 to 20mm thick Sadhana Halli Grey. machine cut granite stone slab up to 8' (2.43m) set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per Sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

Supply of Stain less steel fly proof wire mesh of not less than 20 gauge

Rupees Seventy Seven Lakh(s) Sixty Five Thousand One Hundred Eighty Seven And Paise Twenty Three Only