PROVISION OF BOUNDARY WALL TO SEPARATE OFFICER MD ACCN AREA SPORT AREA AT CGRA, ADDITION ALTERATION OF TOILET AT CGTC GUARD ROOM AT CGDHQ 4 AND PROVISION OF ARBORICULTURE FOR DEFICIENT MARRIED ACCOMMODATION FOR INDIAN COAST GUARD AT KOCHI

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation in soft/loose soil and getting out complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed.

Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and as directed.

Removing excavated soil to a distance not exc 50m and deposited where as directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Material and Labour for plain cement concrete 1:2:4 type B1 using 20mm graded granite stone aggrgate as in coping, slightly rounded or chamfered angles and throating including use of necessary form work all as specified and as directed.

Material and labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate as in foundations including raft, footings, plinth beam and mass concrete and similar work complete all as specified and as directed.

Use and waste of formwork to sides of foundation footing, for rough finished surfaces, flat complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Supply only integral water proofing compound all as specified and as directed.

Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

Material and labour for complete removal of existing treatment on wall surfaces, preparation of surfaces and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer including necessary scaffolding work complete all as specified and as directed.

Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing materials and rubbish off the premises complete all as specified and as directed.

Removing demolished building materials/debris to a distance of 5 KM beyond the lead included in the rates of respective items taking out/dismantling and deposited as directed including loading, unloading, spreading and levelling complete all as specified and as directed. Note: One cubic metre of demolished building materials/debris shall be considered as one load.

Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) joint free area of each tile exceeding 0.18 sqm but not excceding 0.38 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surface 300x400/450x7mm set and jointed in neat cement slurry over and including backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Material and labour for rendering 10 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.

Material and Labour for Granite 20mm thick ( of any type) work machine cut as in flooring, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite including grinding polishing and laid over and including 20mm thick cement mortar 1 :4 complete all as specified and directed.

Taking down chowkat with shutters( without taking off shutters from the frame) execeeding 1.5 Sqm but not execeeding 4 Sqm each complete all as specified and as directed.

Taking down chowkat with shutters( without taking off shutters from the frame) not execeeding 1.5 Sqm each complete all as specified and as directed.

Supply and fix 30mm thick Factory made wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree ) used instead of exposed portion of PVC sheet beading solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed.

Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated on both side decorative lamination fixed with screws to frame work complete all as specified and directed. NOTE: Frame work shall measured and paid separately.

Supply and fix 4mm thick sheet glass figured, pin headed type of ordinary quality glazing with clips in square exceeding 0.5sqm in each pane complete all as specified and as directed. Note: Glazing clip shall be measured and paid separately.

Supply and fix 3mm thick sheet glass figured, pin headed type of ordinary quality glazing with clips in square exceeding 0.5sqm in each pane complete all as specified and as directed. Note: Glazing clip shall be measured and paid separately.

Supply and fix aluminium powder coated frame and partition using standard aluminium section one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Glass panel/particle board panel filling shall be measured and paid separately.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. NOTE: Glass panel shall be measured and paid separately.

Material and labour for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.

Supply and fix stainless steel Butt hinges stainless steel hinge pin and fixed 100mm size complete all as specified and directed.

Supply and fix extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed

Supply and Fix 200mm long aluminium barrel tower bolt complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 550X400mm including 32mm brass chromium plated waste fitting, 40mm pvc wase pipe, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed.

Supply and fix in repairs Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm bore complete all as specified and directed.

Supply and fix in repairs Bib taps of 15mm dia, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs self closing taps of 20mm dia, cast copper alloy chromium plated screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type angle valve 15mm dia complete all as specified and as directed.

Supply and fix in repair PTMT grating square shape 150mm size with or with out waste hole/with hole (minimum weight 100 Gm) complete all as specified and directed.

Supply and fix in repair 15mm dia PVC connection with PTMT nuts and PVC washers 450mm long and connecting of water pipes all as specified and directed.

Supply and fix in repair 15mm dia PVC connection with PTMT nuts and PVC washers 600mm long and connecting of water pipes all as specified and directed.

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall including taking out unserviceable pipe complete all as specified and as directed.

All as per Item No.43 above but 110mm dia pipe laid in trenches complete all as specified and as directed.

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 75mm dia fixed to wall including taking out unserviceable pipe complete all as specified and as directed.

All as per Item No.45 above but 75mm dia pipe laid in trenches complete all as specified and as directed.

Supply and Fix in repairs PVC (SWR) bends any radius 110mm bore dia with access door complete all as specified and as directed.

Supply and Fix in repairs PVC (SWR) bends any radius 75mm bore dia with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) junction single 110 mm bore, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and fix in repair PVC (SWR) 110mm bore vent cowl complete all as specified and as directed.

Supply and Fix in repair PVC valveless, syphonic action type, flushing cistern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle, flusing pipe etc including brackets complete all as specified and as directed.

Supply and Fix in repair vitreous china wash down water closet Pedastal pattern white (excluding flushing cistern ) including trap set, seat cover black or white closed pattern with flat bottom and conection to trap, flushing pipe, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed.

Supply and fixing in repairs Vitreous China half stall urinal flat back, white , of size 580mm x 380mm x 350mm complete with chromium plated waste fittings including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed.

Supply and fixing urinal partition , vitreous china, white, of size 310mmx770mmx50mm all as specified and as directed.

Supply and fix in repairs Health Faucet flexible braided hose 15mm dia with brass chromium plated nut and washers and wall hook complete all as specified and directed.

Supply and fix in repairs 20mm dia low density polyethylene(LDPE) pipes of pressure rating 4.00 kgf/Sqcm including all joints complete all as specified and directed.

Supply and fix in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and as directed.

Supply and fix in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges of approved quality complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, finished smooth and reforming benching as required for 100mm dia pipe complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/loose soil and getting out including removal of spoil to distance up to 50M complete all as specified and directed.

Material and Labour for red earth/moorum without pebbles obtained from outside MD land, laid in layers not exceeding 15 Cm thick, spreading , levelling, rammed and watering complete all as specified and as directed.

Material and Labour for red earth/moorum without pebbles obtained from outside MD land, laid in layers not exceeding 15 Cm thick, spreading , levelling watering for planting grass with and including supply and mixing of 0.50Kg/square metre mixutre of cow dung, bone meal, insecticides complete all as specified and as directed.

Material and Labour for digging/excavation of pit of size 30cmx30cmx30cm in loose soil and filling the pits with a mixture of river sand and red earth in the proportion of 1:3 mixed with 2 Kg of cow dung powder, 100 gm of bone meal and 10 gm of insecticide(Furidan) complete all as specified and as directed.

Material and Labour for digging/excavation of pit of size 60cmx60cmx60cm in loose soil and filling the pits with a mixture of river sand and red earth in the proportion of 1:3 mixed with 2 Kg of cow dung powder, 100 gm of bone meal and 10 gm of insecticide(Furidan) complete all as specified and as directed.

Supply and planting red palm sapling having 45 Cm height and shall have growth of 65Cm after 06 months complete all as specified and as directed. NOTE for Item Nos. 66 to 73: Contractor shall deploy labour regularly for watering and nursing of all plants up to 24 months from certified date of completion as specified and the quoted rate shall deemed to be inclusive of supply of water.

Supply and planting coconut tree sapling having 75 Cm height and shall have growth of 95Cm after 06 months complete all as specified and as directed.

Supply and planting flower plant sapling having 10Cm minimum height and shall have growth of 25Cm to 30Cm after 06 months complete all as specified and as directed.

Supply and planting Phylanthus sapling having 15Cm to 30 Cm height and shall have growth of 45Cm after 06 months complete all as specified and as directed.

Supply and planting colour flower plant sapling having 15Cm to 30 Cm height and shall have growth of 45Cm after 06 months complete all as specified and as directed.

Supply and planting Song of India flower plant sapling having 15Cm to 30 Cm height and shall have growth of 45Cm after 06 months complete all as specified and as directed.

Supply and planting Dracena flower plant sapling having 15Cm to 30 Cm height and shall have growth of 60Cm after 06 months complete all as specified and as directed.

Supply and planting Mexican grass turfing with adequately developed roots including manure as per standard arboriculture norms complete all as specified and as directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators, sub main wiring etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Material and labour for point wiring with PVC insulated unsheathed, multistranded FRLS copper conductor colour coded with cable 1.5 Sqmm size, 1100 volts grade, confirming to IS:694, concealed wiring drawn through and including PVC conduit including all accessories such as bend, Tee, junction boxes, elbows etc in new GI boxes made out of sheet 1.6 mm thick including one coat of synthetic enamel black paint and providing new 3mm thick plastic laminated sheet cover of approved colour fixed with brass screws and cup washers, including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common eatrh and connected to earth dolly and earth terminal box for the following and making good the disturbed surfaces to match with finishes of existing surfaces complete all as specified and directed:-

(a) one light point or fan point controlled by one switch 5 Amps.

(b) for 3pin 5 Amp socket.

All as per Item No.75 above, but 4 Sqmm size copper conductor cable FRLS and 4 Sqmm copper earth wire cable FRLS drawn through PVC conduit suitable size including provision of conduit and conduit accessories for 3pin 15 Amp socket on independent board.

Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.

Supply and fix Modular switch socket combination one way 2/3 pin 6A, 2 Module complete all as specified and as directed.

Supply and fix Modular switch socket combination one way 2/3 pin 16A, 2 Module complete all as specified and as directed.

Supply and fix in repairs LED tube light fitting with tube decorative ultra slim round profile LED lighting fixtures 18 Watt with extruded polycarbonate, envirmental friendly energy efficient ready to use pack, accessories prewired and connecting up complete all as specified and as directed. Make : Cat No. LHEXBLP5PN1W018 of Havells or Equivalent in Crompton Greaves/Philips/Wipro

Supply and fix in repairs LED Mirror light 18W, Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and directed. Make: Cat No. LMCL18 of Luker or Equivalent in Havells/Crompton Greaves/Philips/Wipro

Supply and fix in repairs Exhaust Fan of size 300 mm sweep with louvers, with metal body AC 230 V, 50 Hz, 1400 RPM and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed. Make: Cat No. Turbojet SP of Havells or equivalent in Usha/Crompton Greaves.

Supply and fix ceiling rose, 65x50mm 3 terminal, PVC, white/any shade, AC 230 volt complete all as specified and as directed.

Material and labour for sub main wiring with two runs of FRLS single core multistranded copper conductor 4 sqmm, PVC insulated and unsheathed drawn through and including suitable size PVC casing and caping with all accessories fixed to walls/ceiling including one run of 4 Sqmm copper (insulated) cable FRLS as earth continuity conductor including complete all as specified and as directed. Note : 3 runs of 4 Sqmm cable and one run of PVC casing and caping shall be measured one unit length.

Supply and fixing distribution board in sheet metal enclosure(CRCA sheet), dust and vermin proof, powder coated, factory made, IP 43 protection, double door type SPN 4 way with 200 Amps, 240 Volt rated copper bus bar neutral and earth connected bars, fixed properly at directed place by using suitable required fixing arrangement complete all as specified and as directed. Note: MCB shall be mesured and paid separately.

Supply and fix MCB SPN, 240 Volts, IP 20 32 Amps, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.

Supply and fix MCB SP, 240 Volts, 6 to 32 Amps, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.

Schedule of Credit (Minus) Rs. 24,581.00 NOTE: Bidder shall insert credit amount of Rs. 24,581.00 as rate in Green field under Col-13.

HIRA FACILITY

AB CONSTRUCTIONS