Providing lift water supply scheme Mohani Khabal tehsil Banar Distt Kullu H.P.

Amount

Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work.

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand : 6 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts and to the enitre satisfaction of Engineer-in- charge.

Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm so as to give a fair finish including centring,shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu -reinforced concrete and plain concrete work in :

I) Foundation and footing bases of column and like the mass concrete with in all height and depth including all leads and lifts.

Vertical surfaces such as wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc.

Providing and laying cement concrete work 1:1.5:3 (1cement :1.5 sand: 3 graded crushed stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: - Foundation and plinth

Providing Laying tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete including the cost of binding wire in all leads and lifts.

Steel work welded in built up sections, trusses and framed work, i/c cutting, hoisting, fixing in position and applying a priming coat of red lead paint. I) In beams, joists, channels, angles,tees, flats with connectin plates of angle cleets as in main and cross beams, hip and jack rafters, purlins connected to common rafters & the like. including all leads and lifts as per direction and to the entire satisfaction of Engineer in charge

Tarun Sharma

Sher Singh