Provn of external ladders for Married Accn at certain Pockets at AF Stn Jodhpur, UPgradation of Dobhi Ghat Area and Misc work at Site 1 A and Site 1B at 33 SU and Provn of three phase Energy Meter at OTM Accn at Site 1b at 33 SU

Amount

Demolition of cement concrete (unreinforced) in ground floor or paving of any description and in any position not otherwise specifically provided for all as specified.

M & L for PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made in rubber mould/ruberised type with gray cement and pigment.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Excavation in post holes or similar holes each n.exc 0.50 cum, getting out and returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr and making

M&L PCC 1:3:6 type C-2 (with using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

S&F of stairs (framed)(Fe 410-W(gde-250,quality-A) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets, etc complete all as specified and directed.(Note: work required upto G+2 blds)

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10 cm in width or girth not otherwise described.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L for cement plaster 1:4 rendering 15 mm thick on external surface finished even and smooth (without using extra cement) complete all as specified and directed

M & L for preparing of new surfaces, plastered or unplastered two coat of cement base paint over one coat of primer on external walls complete all as specified and directed

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing ( Fe- 290, Gde E-165) complete all as specified and directed

S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for 150 mm thick Hard core of gauge n.exc 63mm of branch stone, and leveled in llayers n. exc 15 cm thick watered and rammed to true surface all as specified as directed.

M & L for 75 mm thick PCC 1 :3:6 Type C-2 (20 mm graded aggregate ) as in floor all as specified and directed

Demolition of stone masonry built in cement mortar all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and 1.5 m deep in soft soil

M&L Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) as in bed to drain complete all as specified and as directed

M&L for pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded agg) block masonry with solid block exc 10 cm width and setting in CM 1:6 complete all as spd and directed.

M&L for 10 mm thick cement plaster in cement mortar 1:6 over fair faces of block masonry complete all as specified and as directed

M&L for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in coping to drains in CM 1:6 etc complete all as specified and as directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed

Returning filling in including watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed

Removing excavated material/ all kind of soils exc. 1.50 km but n exc. 5 km and depositing all as specified and directed by Engr -in -Charge

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for Precast RCC cover using 1:2:4 type B2 (using 20 mm graded stone aggregate ) a s in drains cover etc set in CM 1:4 complete all as specified and as directed

M & L for preparing of new surfaces, plastered or unplastered and applying three coat of white wash on ceiling complete all as specified and directed.

M & L for preparing of new surfaces, plastered or unplastered and applying two coat of oil emulsion distemper on walls complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar

M&L for Machine cut kota stone slab flooring 18-20mm thick over and including cement screed bed or bedding 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) for repair of hold fasts and similar works as per specified drawings complete all as specified and as directed.

Supply and fixing Flush shutters,30mm thick solid core construction, with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete

Supply and laying 20 mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as directed by Engineer-in-Charge.

Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S&F 15 mm bore bib taps fancy type cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed in 10 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Supply & Fix Microprocessor based three phase electronic tamper proof, CT operated energy meter for LT supply with optical communication port, accuracy class 0.5A BM RS 485 Modbus voltage 3x240V, Complete all as specified. (Make :L&T/HPL/Benlo or other equivalent make)

Supply and fixing 3.15 mm thickness CRCA sheet metal enclosure for fixing three phase energy meter ,enclosure having front opening door and fixed with two Nos stainless steel hinges, polycorbonate knobs to be provided for opening doors, Acerlyic 3mm thick glass to be provided in front side of enclsoure for monitoring of readings, Two number hooks to be provided for mounting on walls/panels and necessary control wiring to be done from energy meter to main supply complete all as directed.

M/S MAJISA CONSTRUCTIONS (BID ID -3516820)

M/S KAUTILYA GARG (BID ID -3522432)

JAMWAY MATA CONSTRUCTION COMPANY (BID ID -3516794)

Savitri Enterprises (BID ID -3522024)

Aksher Construction Company (BID ID -3519794)