Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹19.0 L
EMD Value
₹47,500
Closing Date
1 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Chief Engineer, TTD, Tirupati
D.E(Elec)-II, Room No.128, TTD Admn. Bldg., Tirupati
Providing Electrification for the work of Construction of new sheds ( 2 Nos ) for Cows in the S.V Gosamarakshana sala at palamaneru in chittor District
1005176
545/DE(Elec)-II/TTD/TPT/2026-27
OPEN - NCB
Electrical Works
CHITTOOR, ANDHRA PRADESH
6 documents required · 6 mandatory
₹672
₹47,500
16 Nov 2026
16 Nov 2026
16 Nov 2026
90 days
Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings,Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses/Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes : Sudhakar / Finolex / Polycab / Kumar / AKG / Indiantubes / GM / Anchor / Nandi / Poly line / Goldmedal
Supply and Fixing of 32 X 20 mm P.V.C. Mini trunking with all accessories fixing on surface walls for surface wiring on Brick / stone walls,RCC roofings, Trusses channels including all labour charges etc., complete. (The rate for plastic frame anchor with countersunk, Tape,Sealant and adhesive for fixing of PVC Trunking will be paid separately). Make: Legrand / OBO Bettermann
Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A Wire Makes : Finolex / RR kabel / Havells / KEI / Polycab / L&T Grade-A Modular switch Makes : Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree - Murano - Amare – Ducor / GM Four-Five / Gold Medal (GIFA)
Supply and wiring with 2 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A Wire Makes : Finolex / RR kabel / Havells / KEI / Polycab / L&T Grade-A Modular switch Makes : Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree - Murano - Amare – Ducor / GM Four-Five / Gold Medal (GIFA)
Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A : Make: Finolex / RR kabel / Havells / KEI / Polycab / L&T
Supply and run of 5 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A : Make:Finolex / RR kabel / Havells / KEI / Polycab / L&T
Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A : Make: Finolex / RR kabel / Havells / KEI / Polycab / L&T
Supply and run of 5 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A : Make: Finolex / RR kabel / Havells / KEI / Polycab / L&T
Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A : Make: Finolex / RR kabel / Havells / KEI / Polycab / L&T
Supply and fixing of 5/8" Angle / Batten Holder on the existing junction boxes/ T.W Board etc. and giving necessary connections. Makes: Anchor / Goldmedal (Olive) / GM ( G Home) / Havells (Reo)
Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade - A : Makes:Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade - A : Makes:Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 20 Amps 1 Way 1 Module Modular Switch with Neon Indicator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade - A : Makes: Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 20 Amps 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade - A : Makes: Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 1 or 2 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade - A : Makes: Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 4 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade - A : Makes: Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 6 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade - A : Makes: Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade- A : Makes:Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of 1 or 2 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Supply and fixing of 6 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
"Supply and fixing of 8 or 9 module surface box with modular cover plate with frame on the wall with all required accessories and all labour charges etc., complete Make: Legrand mosaic / north west / M.K / /G.M. / L&T / Legrand arteor
Supply and fixing of 12 / 16 module surface box with modular cover plate with frame on the wall with all required accessories and all labour charges etc., complete
Supply and fixing of 2 Module Modular type electronic step type Fan Regulator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade - A : Makes:Legrand Arteor / Schneider Zen cello / L&T englaze / Crabtree- Murano - Amare - Ducor/ GM Four-Five / Gold Medal (GIFA)
Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.
Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.
Supply and run of 25mm X 6mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
Supply and run of ' 8 ' SWG G.I wire for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers Wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
Supply and run of ' 8 ' SWG copper Wire for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" Brass Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
Earth Work excavation for trench for laying of U.G. Cable in ordinary rock (not requiring blasting) to the required width and depth and depositing the same on bank as directed during execution etc., complete . Earth Work (Hard Soils)
Supply and fixing of 6 to 32 Amps range SP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/ L&T - Newrang / Indoasian (Opti Pro)
Supply and fixing of 40 to 63 Amps range TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/ L&T - Newrang / Indoasian (Opti Pro)
Supply and fixing of 63A Four Pole, 30mA RCCB for earth leakage protection, confirms to IEC:61008 / IS: 12640 (Part-I) - 2008 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Havells STADx/ L&T - Newrang / Indoasian (Opti Pro)
Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)
Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.
Design, Fabrication, Supply, Installation and Commissioning of Outdoor type timer box of size 600mm(W) x 600mm(H) x 300mm(D) and made with 14SWG CRCA sheet steel cleaning with 7 tank process and painting with powder coating. The box shall be made by provide rubber beeding, door knobs etc., and the front door with double leaf arrangement with hinges and locking arrangement. Suitable heat Dissipation / Air / Ventilation ducts with inside wire mesh shall be provide to the panel. The box base shall be mounted on 40x40x6mm MS angle with stand legs at 4 corners at a length of 700mm each of 40x40x6mm MS angle with necessary welding and the angles shall be painted with two coats of enamel black paint over one coat of red-oxide. The timer box legs should be fixed in ground of size 400mm depth by using 20mm HBG metal in 1:3:6 ratio.
A 9 Ply - 18 mm thick plywood sheet of size 0.50 m x 0.50m to fix inside the box and the following shall be supply and fix firmly on the ply wood sheet and giving necessary connections between Isolator - contactor - timer - out going MCBs etc., with suitable size of PVC copper wires /bus links and suitable holes to be made at bottom sheet of the box for incoming / outgoing cables and install the box at site as directed during execution by the site Engineer.
a) Incoming: 100 A FP Isolator - 1 No. b) Out Goings: 63 A 4-pole MCB - 2 Nos. c) LED indicator lamps - 3 Nos. d) ML - 4 3 Pole, 415 V Power Contactor L & T) - 1 No. e) Togele / 6 Amps 2 Way Switch and giving connections.- 1 No. f) Digital Time Switch (L & T) - 1 No. g) An earthing terminal should be provide to the box. h) Danger name plate -1 No. i) The ratings of switches, feeder name, bus bar / cable chamber etc., shall be indicate on panel with stickering letters as directed during execution.
Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field engineers) Make: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
Fabrication, Transportation and supply of 1.50 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field engineers) Make: Bajaj / Valmont /Transrail/Utkarsh/ Skipper/ Laasma
Supply of 155 X 210 X 92 Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Make : Hensel/Sadhrish
Supply of 40 mm dia G.I Pipes of "B" Class as per IS:1239. (TATA:MAKE) Make: Jindal / Appollo / TATA
Supply of 80 mm dia G.I Pipes of "B" Class as per IS:1239. (TATA:MAKE) Make: Jindal / Appollo / TATA
Supply and transportation of 16 SqmmX 4 core LT XLPE insulated UG Cable. XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex/ Fortune Arrt
Supply and transportation of 25 SqmmX 3.5 core LT XLPE insulated UG Cable XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex/ Fortune Arrt
Supply and transportation of 50 SqmmX 3.5 core LT XLPE insulated UG Cable XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex/ Fortune Arrt
Supply of 2.5 Sq.mm x 3 Core Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Grade A: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million
Laying of U.G cables upto 50 Sq,mm and back filling of trench including labour charges etc., complete.
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 25 Sqmm Makes:Dowels/Jainson/Comet
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 Sqmm Makes:Dowels/Jainson/Comet
Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.
Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.
Supply of 1400mm (56')BLDC (Brush less Direct Current ) Ceiling fan with double bearing to operate as 230 V, Single phase, 50 Hz AC Supply. including transportation Specifications Model - Atomberg - Efficio - 1400 mm (56 " ) , 35 W Sweep : 1400 mm ( 56 " ), Type of motor : Brush less DC ( BLDC) Rated voltage : Single phase, 230V AC Rated Frequency . 48 - 52 Hz BEE labelling / Star rating : 5 Star Operating Voltage range : 110 to 290V AC Power factor : 0.99 Service Value : 7.8 CMM /W Thermal Harmonic Distortion (THD):Less than 10%(THD) Air delivery : 272 CMM (m3/mm ) Rate power : 35 W Motor speed : 275 RPW with speed control No of Poles : 14 Poles with 7 Magnets Stator Winding Gauge : 22 SWG Bearing Winding Gauge :22 SWG No of blades : 3 Type of blade leaf : 1.1 mm thick alluminium sheet Down rod size ( without shackels ) : 260 mm Operating temperature : With in 2 degree of ambient Class of insulation : Class B Warranty : 3 Years on site Speed Control : Regulator Compatible Colour : White /lvory /Matt brown Make: Atomberg/ Havells/ Crompton/TTD Approved brands.
Supply of 16" (400mm) Wall mounted Fan. Makes: Crompton Wind Flo / Bajaj Elite / Havells Swing / Orient Wall 50/Halonix Krypton/G.M. (Bolt)/ Goldmedal(Nora-16)/Million(Swing wall fan)
Supply of 16" (400mm) Pedestal Fan. Makes: Crompton Wind Flo / Bajaj Spectrum / Havells Swing / Orient Stand 37/Halonix Krypton/ Polycab / G.M. (Bolt)/Goldmedal(Nora)
Supply and fixing of 4' T5 18W LED batten type fittings. With internal Driver with polycarbonate housing & PC diffuser suitable to Operate on 230V, AC, 50Hz power supply as per the following specification. Makes: Philips / Crompton Greaves / Osram / havells / GE/Orkus As per Specification. 1. Input Power: 18W ±5% 2. Input Voltage and Frequency:230V ±5% AC, 50Hz. 3. Power factor : >0.95 4. THD % : <15% 5. Operating Voltage : 140 - 270VAC 6. Surge Protection : ≥ 2.5 kV 7. LED make: Nichia (Japan) / Osram (German) / Philips Lumiled / Cree (USA) / Bridgelux (USA) / Seoul / Lednim / Everlight / Epistar / Edison. 8. Luminous Flux (Lumen) : 1800 ± 5% 9. Luminous Efficiency (LM/W) : 100 ± 5% 10. Colour Temperature (K): 5500K to 6500K 11. CRI : ≥ 80 12. LED Beam Angle : >150º 13. IP Grade: IP20 Warranty : 5 Years. Standards Applicable: IS: 10322 Part-5, Sec-3. Manufacturers internal Type Test Report
Supply and transportation of 120W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass / temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.
a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture /Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Valmont (Supernova)/ /JLCJustled(Tilto)/ Greenlites(HI-Lux) /Sturlite(Asteor) Capart(Premium) /Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06)/Orient (Fiesta Plus) /Bee-lite(Gritty) /Ecolink(Durastreet Gen-II) /Pro-Lite(GLM)/ Transrail(Ursa major). b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.
Supply and transportation of ......... LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE:Wipro/ Philips/GE-Venture/ Crompton / Bajaj/Greenlites / Havells /Valmont(Hypernova)/JLCJustled(Hi Power)/ Capart(Premium) //Sturlite(Spektr)/Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Livia Pro) / FortuneArrt (Fin)/ Rhino(GPFL02 Series)/Orient (Sigma Plus) /Bee-lite(Endura)/Ecolink(Dura floodlight) / Pro-Lite(BGL) /Transrail(Indus). b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
Design, fabrication, supply and erection of out-door type control pillar box of size 1550mm (W) x 1100mm (H) x 400mm (D) made with 14 SWG CRCA sheet. The box should be double door with locking arrangement, rubber beeding, door knobs etc., and the box will be mounted on 40x40x6mm MS angle with stand legs at 4 corners at a length of 600mm each of 40x40x6mm MS angle with necessary welding two coats of enamel black paint over one coat of red-oxide. The pillar box should be fixed in ground with cement concrete using 20mm(1:3:6). The entire box shall be powder coated with siemens gray colour through 7 tank process. The following switch gears etc., should be accommidate in the box with necessary holes provided to the bottom sheet of the box for incoming / outgoing cables as directed during execution.
Incoming:-a)Incomings: Supply of 250A 4 Pole MCCB,36/35 KA, Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity …36/35 KA……. with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno - 1 No
Outgoing:- a) Supply of 125A 4 Pole MCCB,25 KA, Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity …25KA……. with thermal magnetic releasePanel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DPX3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno- 2 Nos.
b) Supply of 63-100A 4 Pole MCCB,16 KA , Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity 16 KA. with thermal magnetic release Panel Mounted. Makes: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno- 2 Nos.
c) Copper bus bar of size 1" x 1/4" should be run horzointaly in the bus bar chamber on 40x8mm insulator supports and should connect to the MCCB's & the bus bars should provide with heat shrinkable sleeves with colour code - 4 Nos. d) An earthing terminal should be provide to the box.
Fixing of given (9" to 24") Exhaust fan of in wall with necessary connections and masonry work of making hole, finishing etc., complete
Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of size up to 16 sqmm Makes:Dowels/Jainson/Comet
Fabrication, Transportation and supply of hot'dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel ptate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 5.0 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 200 x 200 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes:Bajaj / Valmont/Laasma /Transrail/ utkarsh / Skipper.
Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete.
Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification:- (a) The Earth Electrodes, 40mm dia, wall thickness 3.25 mm, terminal Size 25x8 mm, terminal hole dia 12 mm, 2 meter long, galvanized, including 1 bag (25Kg to a bag) of Earth Life Compound, as per IS 3043, Base Metal: IS marked branded mild steel pipes. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.
b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound . (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be provided with 18" dia hume pipe. Earth connections shall be given to the Earth Electrodes with bolts, nuts & washers.
(e) A 65 mm dia PVC conduit is to be embedded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.
Supply and run of 25 mm X 3 mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
Supply of 120 W High Bay LED light fitting with high power COB / individual LEDs on SMD suitable to operate on 230V, 50 Hz AC supply as per following specification 1. Luminaire a. Output of luminous flux of LED luminaire (after losses in Glass, Lense, Reflector etc., as applicable:- For 120W, Luminous flux ≥ 12,000 Lumens b. Height at which 120W LED high bay luminaire fitting to be fixed. Average and centre illuminations: c. Luminaire viewing angle: 135 Degrees d. Body lamp shade: Aluminium pressure die-casted housing with powder coating. Aluminium reflector e. IP Protection : IP-54 (or) above IP 54 Protection f. Diffuser / Glass: Glass lense g. Material for LED:Chip on Board (COB) / SMD h. Working Temperature : 0 Degrees to 50 Degrees Centigradei. Working Humidity: 10% to 90% Relative Humidity j. Working Life:>50,000 Hrs at 35 Degrees Centigrade ambient temperature.
k. Light distribution curve / Beam pattern, Average lighting / Beam angle l. Size of luminaire Bottom dia and height: As per manufacturer’s specification of Bay lights. (2) LED a) Make of LED used in manufacture of fittings. (COB): NICHIA (JAPAN) / OSRAM (German) / PHILIPS LUMINED / CREE (USA) / EPISTAR / BRIDGELUX (USA) / SEOL / LEDNIM / CITIZEN LED. b) LED Power: High power COBs are to be used. c) LED Operating Current: Maximum operating current to be specified. (AC Current & DC Current) d) LED life: > 50,000 Hrs with 70% of Lumens output. e) LED Efficacy (in Lumens / Watt) : > 115 Im/w f) Luminaire efficacy : Not less than 100 Lumens / Watt g) Total system wattage including losses (Luminary wattage):- Luminaire output = 120W system output = 120 W +/- 10% h) Correlated colour Temperature (CCT) (Natural light / Day light ):- 5500K-6500K
i) Colour Rendering Index (CRI):- >80 (3) MCPCB High power COB LED / individual SMD LEDs must be mounted on copper MCPCB for high thermal conductivity and fastest heat transfer from LED junction. a) Heat Sink: Good thermal management System should be provided & LED must be mounted on heat sink conductive aluminium bars with suitable large surface area by means of fins to dissipate the heat to ambient air (4) Electrical a) Input Voltage and Frequency range: 230V AC, 50Hz +/- 3 Hz b) Operating Voltage:- 140V - 270V AC Universal Electronic constant current Driver c) Power factor: >0.95 d) Driver efficiency (Constant current driver with isolation transformer) Driver should be easily detachable & replaceable :- > 85% e) Total Harmonic Distortion (THD):- <10% f) Protection for over current, over voltage, over temperature, under voltage and output short circuit, surge protection 5KV, IEC 6100-4-5: Shall be provided.
g)Electrical connections: Internal connections with 0.75 Sq.mm 3 core cable. 5) Warranty for total luminaire: 5 years 6) Standards Applicable Make : Phillips / Bajaj / Crompton greaves /Wipro / K-Lite / Halonix / ORKUS / Venture / Havells
Supply of 39 W LED Well glass luminaire with IP 65 protection. Makes:Philips Model No. By200p LED 35 SEW PSU PC or it equavalent in Crompton/Havells
Supply and fixing of fabricated M.S clamps made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS flat with necessary holes on either side with suitable MS bolts and nuts and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of PVC pipes, Conduit pipes etc., on Trusses / Channels etc. including all labour charges etc., complete.
Supply, Installation , Testing and commissioning of an all-in-one integrated LED solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit and with the following specifications: A. LUMINAIRE The luminaire shall have highly efficient mid power white LEDs with lumen output in the range of 2800~3000 Lumens at system level & wattage should not be more than 15~20W with a typical correlated color temperature of 5700K with CRI>70 and lenses with efficient bat wing optics designed for efficient light distribution for secondary roads. Life will be 50000 Burning hours life class. The Successful bidder shall submit LM 79 & LM 80 of the Fitting and LED.
Luminaire RAL 7011 with OEM Name Embossment is mandatory to ensure quality parameters met such as Single Piece High Pressure Die Cast. A switch shall be provided on the housing to disable the luminaire when required. The Luminaire shall meet the relevant IEC codes as mentioned in Table 1. Product should always deliver fixed output of 2800~3000 lumens at system level during complete autonomy period.
B. INTEGRATED CHARGE CONTROLLER: The luminaire shall have a highly efficient, integrated microprocessor based MPPT charge controller with driver mounted on the same board to minimize power loss. This intelligent power management system shall maximize the overall system efficacy to Minimum 175 lumens/watt with LM79 Report from Any NABL Accredited lab. The Controller Efficiency shall be > than 90% and shall have the following inbuilt protection features:
Ø Protection against battery overcharge and deep discharge condition. Ø Protection should be provided against battery and Panel reverse polarity. Ø Over current protection. Ø Protection for reverse flow of current through the PV module(s) should be provided. Ø ON/OFF switch to be provided to prevent discharge of battery during storage / before Installation Ø The Controller shall meet the relevant IEC codes mentioned in the table-I.
C. SOLAR MODULE : The Solar Cell shall be made of Premium grade mono crystalline silicon Cell. The Solar Module Power (Wp) shall be minimum 3.5 times the power consumption of LED Streetlight. The Solar Module Construction shall be of Low iron tempered glass with low reflection characteristics and with rated IP 65. The Life Cycle shall be > than 25 Years. The Solar module shall meet the relevant IEC codes mentioned in Table-I. D. BATTERY : The Battery shall be Rechargeable Lithium Ferro Phosphate (LiFePo4) Battery Pack with rating (AH) minimum 1.75 times the power consumption of LED Streetlight. The Battery Pack should have Inbuilt Battery management system Module with following safety features Ø Accidental short circuit Ø Over discharge Ø Over charge Ø Over temperature. Ø Low Temperature The Life Cycle shall be Minimum 2000 Cycles for 90% daily depth Discharge. The Battery shall meet the relevant Compliance Standards mentioned in table-I.
E. HOUSING : The luminaire shall have single piece pressure die cast LM6 aluminum housing with Proper OEM Brand Name Embossment for ensuring quality & ruggedness and excellent heat dissipation with IP 65 protection and IK08 impact resistance. The front cover is composed of weather resistant, UV stabilized polycarbonate. The front cover is tightly secured with the housing to ensure that the luminaire has an ingress protection of IP65. The luminaire shall have a smart self-diagnosis feature with LED indicators for battery charging, deep discharge and Load cut off indication visible from ground in day light.
Additionally, it should also be possible to monitor Current and voltages of Solar panel and Battery for diagnostic purposes through the mobile app. Test Certificate from Any NABL Lab is required. F. Mounting Bracket : The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. It shall be suitable for mounting on pole of diameter 48 – 60mm. Make: Philips/Jaquar / Havells or its Equivalent in TTD approved brands Model: BRP710/LSRTSLRA1020 XC
Supply of 4 Pole 4 Module 40 KA, 1.4 KV Voltage Surge Protector, confirms to IEC/EN 61643-11. Makes: Legrand / Siemens / G.E / Lauritz Knudsen (formerly L&T) /Hager/Havells.
(Rupees Eighteen Lakh Ninety Eight Thousand Two Hundred Eleven and Paise Eighty Three only)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
NIT 545.docx
TENDER_DOCUMENT • 0.17 MB
Schedule 545.xls
TENDER_DOCUMENT • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .