08/2024-25/EDCR Replacement of Jarjer/Damaged wire,Pole,GI wire and other System improvement works under Business Plan 2024-25, EDD-Milak, Rampur.

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

Jointing Kit (indoor)

Jointing Kit (outdoor)

Battery Set 24 Volt

Battery Charger 24 Volt

11 KV X-Arm MS Angle 65x65x6 MM

33 KV X-Arm

PCC Pole 9 Mtr Long

PCC Pole 8.5 Mtr Long

11 KV 3*300 Sqmm XLPE Cable

ACSR Rabbit Conductor

ACSR Dog Conductor

Stay set Complete

Earthing Complete

Polymeric 33 KV Pin Insulator with Pin

Polymeric 11 KV Pin Insulator with Pin

Polymeric 11 KV Disc Insulator with fitting

Scrap XLPE Cable (Kg)(Recived Back Site to Store)

Old and used Battery & Battery Charger (Recived Back Site to Store)

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

9 Mtr long PCC Pole

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

9 Mtr long PCC Pole

8.5 Mtr long PCC Pole

Providing & Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Providing and Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of 33 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of 11 kvXLPE cable 3*300 sq mm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling old and jarjar Battery Charger set as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling old and jarjar wire and other material as per RESPO Norms and as per direction of Supervising Engineer.

Installing of Battery Set 24 Volt as per RESPO Norms and as per direction of Supervising Engineer.

Installing of Battery Charger 24 Volt as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing 11 KV outgoing VCB Relay per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing GI wire 6/8 Swg per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Gaurding Angle per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Aluminium winding wire per RESPO Norms and as per direction of Supervising Engineer

Providing and Painting Red Oxide Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and Painting Aluminum Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing earth wire clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Aluminum Jointing Sleeves per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Barbed wire per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Danger Board with clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing F Bracket with Nut Bolt per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp with Nut Bolts RESPO Norms and as per direction of Supervising Engineer

M/S MEGHA ENTERPRISES