Supply, Installing and Commissioning of Automatic Car Rotary Parking System for 10 cars to improve Traffic Flow for ankleshwar nagar palika

NAME OF WORK :- “Supply, Installing and Commissioning of Automatic Car Rotary Parking System for 10 cars

to improve Traffic Flow for Ankleshwar nagarpalika”.

Description Quantity Rate Per Amount

1NosName（SUV) 9 Layer 10 DH Cars Vertical Rotary Parking

Equipment Car also acts as stiffener for platform, Manual retrieval,

Sensor (optional), Operating - Push Button Key Lock Operated

Platform Balancing Mechanism.-Synchronized lifting through leaf chain,

Platform Wheel Stopper type (Square

/U)Square 48x48mm, Manufacturing : -Process Machined

Manufacturing - Cutting, Bending, Drilling all are on fixtures by Robotic

/CNC machine to the required accuracies and repeatability in mass

production cycles, Overall Paint Scheme :- All structure Parts

Galvanised, Pallet parts in GI Finish Centre Sheet (120 GSM) Side

Members Supports (90GSM)./ All the Steel parts are of Epoxy Unicoat,

Pallet parts, in GI Finish except Side Members & Supports, Steel

Structure, :- Primary rolling Mills / Jindal / Sail / VSP / RINL / ESSAR /

/JISPL /Mahamaya/ Pushpak/JSW /Prime /Equivalent – India, GI

/ AMNS / UTTAM / TATA / POSCO / Equivalent, Hydraulic cylinders:-

Single telescopic cylinder of HAPL Equivalent - India, Hydraulic power

pack:- HAPL / Equivalent - India, Hydraulic Oil:- Altrol/

Arabian/Servo/Hp Equivalent - India, Control valve:- Hydac / Spica/VIS/

Bosch Rexroth/ Equivalent - India, Solenoid valve:- Hydac / VIS/ Bosch

Rexroth / Spica/ Equivalent - India, Power pack Motor:- Lhp /Hindustan/

Delco/ REMI/ Shreya / Equivalent - India, Leaf Chain:- Ti

Diamond/Reynolds/Equivalent – India, Sensor:- Omron/Autonics/

Honeywell/Equivalent - India, Wires and Cables :- Harness, Polycab

/Equivalent - India, Control Panel,:- Hapl /Equivalent - India, Anchors &

Hardwares:- Arrow/Hilti/Fischer/Equivalent - India,

Dimension (Length)5300mm×(Width)2100mm (include car outside

width)×(Height)2000mm Car Weight ≤2500kg Occupy Space

6.5M×5.7M Total Height 21.30m Weight 44.84t Car Quantity

Cars(Mechanical Car Space) 1.00 5110600.00 Nos

Motor Power 22KW (Germany Nord/SEW Motor) Cycle Speed

≤6.7m/min Max Take Car Time ≤165S Enter Method Forward Entry;

Backward Exit Operation Interface Put Button + IC Card Control Mode

PLC Control(Schneider Brand) Operation Control Mode Normal or

Frequency Inverter Drive Mode Motor + Gearbox + Chain (double row

small chain) Lift Mode Shift Fork + Lift Chain : Big Chain section

distance is 460mm,Chain board dimension 100*16,Material 40cr Safety

Factor Lift System ≥7 Steel Structure ≥3 Noise ≤50bd Usage

Temperature ±40℃ Protection Class Motor IP55 Service Life Whole

unit machine can use over 30 years, after Strengthen anti-corrosion

treatment service lift can reach 45 years. Power 3 Phase 5 wire ; AC

380V 50Hz (we suggest double power supply and prepare generator)

Frame Structure Column square tube250*250*8;Combination frame

square tube250*250*8mm,Combination main frame square

tube:150*150*6mm;Car Carry Plate hanging beam Φ63*6mm,Car

Carry Plate thickness 4mm Wire Installation Mainly to bridge or metal

trough wire connection, plastic trunking connection as a, Vertical

columns - Sizes C-Channel C-800mm x 800 mm, Guide Rails (Square

/U) Square Bright Bar 100 mm x 100 mm, Structure - Finish with 80 to

100 microns Avg. DFT, Vertical column bracket supports Yes,

Hydraulic Cylinders - Double acting as per the system, Hydraulic oil -

Hydroplus/Servo/H.P. 68 as per power pack capacities as per the final

scope of supply, Hydraulic Hose Pipes specifications- 24 mm Dia.,

1.5mm Thick seamless Pipe, length as per final scope supply,

Hydraulic Power Pack- power requirements With 22kw Submerged

Motor, Platform Width –Maximum in mm 2400 mm, Platform Length in

mm- 5300 mm incl. ramp, Platform Side Members & Arrangement-.Pre

galvanized (130GSM) thickness with Formed Sheet with Cnc bending,

Platform Entrance Plate - 10mm Checkered sheet with bending,

Platforms - Galvanization coating thickness on IS 277 Spangled GI

Sheet of minimum 2mm thick with 2 Groove sheets in microns GSM

Description Quantity Rate Per Amount

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 51,10,600=00 Put to Tender Rs. 51,10,600=00

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consultant Municipal Engineer

Ankleshwar Nagarpalika

Ankleshwar Nagarpalika