Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC VILLAGE DUBOR P O TIMBI TEHSIL SHILLAI DISTRICT SIRMOUR H P | TIMBI | SIRMOUR | HIMACHAL PRADESH | 173027 | L1 | Accepted-AOC AOC | |
| 2 | L2₹10.2 L+₹52,823.76 (5.45%)Rejected-Finance R O VILLAGE KHERI CHANGAN PO KANGTA FELOG TEHSIL DADAHU ST DISTT SIRMOUR HP | L2 | Rejected-Finance Rejected | |
| 3 | L3₹10.7 L+₹96,424.70 (9.95%)Rejected-Finance CHIYAMIMYANA PO KANSAR TEHSIL PAONTA SAHIB SIRMOUR HP | SIRMAUR | SIRMAUR | HIMACHAL PRADESH | L3 | Rejected-Finance Rejected | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹12.7 L
EMD Value
₹25,317
Closing Date
5 Jun 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Jal Shakti Division Nahan
Executive Engineer Jal Shakti Division Nahan
Providing Toilet facility at Renuka section) under JJM
2023_HPIPH_73829_4
NHN-SMROO-722- 2497-2577 dt 24-5-23
Open Tender
Civil Works
Item Rate
90 days
Dadahu
Please refer Tender documents.
9 documents required · 9 mandatory
₹400
Executive Engineer Jal Shakti Division Nahan
₹25,317
Yes
23 Aug 2023
24 May 2023
5 Jun 2023
24 May 2023
5 Jun 2023
27 May 2023
Amount
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
Providing and laying cement concrete 1:6:12 (1Cement:6sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts
Squarred rubble stone masonry coursed with hard stone of approved quality in foun. & plinth i/c racking out of joints in CM 1:6 in all leads & lifts
Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1cement:2sand:4 graded stone aggregate 12.50 mm nominal size and curing complete in all leads and lifts.
Applying a coat of hot bitumen (mexphalt 80/100 equivalent) using 1.70 kg. per Sqm. on damp proof course after cleaning the surface with af loating piece of cloth lightly socked in Kerosene oil in all leads and lifts.
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts. and carriage of material and as per direction of Engineer incharge
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike?plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb
Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40 mmX 40mm X6mm angle iron 3.15 mm m.s gusset plates at the junctions and corners,all necessary fittings complete including applying a priming coat of red lead paint. Using M.S angles 40mm x 40mm x 6mm for diaganal braces in all respect and as per direction of Engineer Incharge.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.
a )Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness.
b) Vertical surface such as walls (any thickness) partition and the like I/c attached pillasters, buttresses, plinth and string sourses and the lick
c) Edeges of slab
Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-
Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level.
Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40mm thick) in all leads and lifts.
20 mm cement plaster in single coat on rough side of brick /stone masonary for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80-mm in girth and finished even and smooth in cement mortar 1:6(1cement:6app.sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
6mm cement plaster in ceiling in cement mortar 1:3 (1cement:3sand) including all leads lifts and carriage of material at site and as directed by the Engineer Incharge.
Providing mild/tor steel reinforcement for R.C.C. work including bending and binding and placing in position complete up to floor two level including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.
Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter :-- With readymixed paint other than white in all leads and lifts. as per direction of Engineer incharge
Applying priming coat over new steel and metal based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing primer pink in all leads and lifts. as per direction of Engineer incharge
White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts. and as per the direction of Engineer incharge.
Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete in all respect
(a) Sliding door bolts 250x16mm.
(b-i) M.S. tower bolts (Barrel type) 200x10mm.
(c-i) M.S. handles 125 mm dia
Providing and fixing PVC Pipe 80 mm dia from P or s trap to septic tank & vent. in septic tank including all leads ,lifts and carrige of material at as directed by the Engineer Incharge.
P/F G.I. elbow,tee, socket, union, plug, nipple 7 Gate valve heavy grade of following dia reputed make,i/c all lead lifts and carriage of material at site and as directed by the Engineer Incharge
Elbow 15mm dia
Tee 15x15x15 mm dia
Socket 15mm dia
Union 15mm dia
Plug 15mm dia
Nipple 15mm dia
Gate valve 15mm dia
C.I. Clamp 65x15
Laying and jointing in trenches galvanised mild steel tube for In Let , Out Let and Scour pipe (light grade) tube fitting (earth work to be measured and paid for seperately) including all leads, lifts and carriage of material at site and as directed by the Engineer Inchargte.
15 mm dia (L)
Providing and fixing CI L-bend of reputed make, including all lead, lifts and carriage of material at site and as directed by the Engineer Incharge.
Providing and fixing b cock long body of reputed make heavy duty , including all leads, lfits and carriage of matrial at site and as directed by the Enginer Incharge.
Providing and fixing PVC Storage tank 1000 ltr cap. make heavy duty , including all leads, lfits and carriage of matrial at site and as directed by the Enginer Incharge.
Providing and fixing P or S Trap including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.
Providing and fixing toilet sheet with CP Brass hings (white) including all leads ,lifts and carrige of material at site and asdirected by the Engineer Incharge.
Providing and fixing vent pipes & fittings single socked pipe 50 mm dia (1.83 mtr. Long) including all leads ,lifts and carrige of material at site and asdirected by the Engineer Incharge.
P/F vitreous china wash down water closet (European type WC pan) with "P" or"S" trap including jointing the trap with soil pipe in cement mortor1:1 (1cement :1 sand) i/c seat cover ( Anglo Indian type universal closet)
P/F 10Ltrs. Capacity high level C.I. flushing cistern approved brand & shade with pair of C.I.or M.S.brackets complete with fitting as syphonic arrangement 15mm mm size brass ball valve with polythene floating union & complete for connection with inlet, outlet over flow pipe etc.i/c cutting holes in walls & making good the same.(Over flow pipe,chain & pull are not included in the rate.)
P/F vitreous china 100 mm dia. "P" or "S" traps for W.C. squatting pan i/c jointing the trap with pan & soil in cement mortor 1:1 (1Cement : 1 Sand)
P/F vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting i.e.size 550 x 400 mm
Providing & fixing PVC connection pipe with brass unions i.e. 45 Cms. Inlet & PVC connection i/c making the wall good to wall ceiling.
Chaman Lal Contractor
Deepak Kumar Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .