WBMAD/ULB/TNAA/NIT-17e/2025-26

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety /Chandil Variety

125 mm brick work with 1st classbricks in cement morter ( 1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 20 mm thick plaster

Neat cement punning about 1.5 mm thick in wall ,dado, window sills, floors etc . Note cement 0.152 m3/100 m2

b) 50 mm thick interlocking designer concrete paver block M-30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658-2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.) (ii) (ii) Coloured Decorative

Applying exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Decorative Textured (Martt Finish) or Smooth Finish Acrylic exterior emulsion paint including scraping and prepairing the surface thoroughly , complete as per manufacturer's specification and as per direction of the EIC in Ground Floor (b) two coats.

Protective and Decorative Acrylic Exterior emulsion paint of approved quality, as per manufacturer's specification and as per dirction of EIC to be applied overf Acrylic primer as required. The rate includes cost of materials, labour, scaffolding and all incedental charges but excluding the cost of primer in ground floor (two coats)(a) normal acrylic emulsion.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : with Super gloss (hi gloss) (b) On steel or other metal surface : (iv) Two coats (with any shade except white)

Supplying and planting of different plants / trees (supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads and lifts, carriage, handling, manuring applying pesticide and fertilizer etc. i) Furcaria Veriegated 10 to 12 leaves in height 20-30 cm in earthen pot of size 25 cm

VISHALA Cast Iron Powder Coating Garden Bench, Capacity 3 Seater VISHALA(VGB-03), Product Each id: 5116877-60399337452, Country Of origin: India, Local Content (Mll): 95%, Sold by: OEM OEM verifi ed catalogue, Seating Capacity: 3 Seater, StandLegs Design Decorative, Finsh : Powder Coating, Back Rest:With, Arm Rest: With, Warranty: 3 year, Weight Bearing Capacity: 90 Side Frame Material: Cast Seat Material: Mild Steel Pipe 14 Gauge, Back Rest Material: Mild Steel Pipe 14 Gauge, Total Height: 870 millimeter, Seat Height: 450 millimeter, Width: 550 millimeter, Total Area Required: 1550 millimeter

Supply & installation OF See saw 4 no fast quality frp Seat, main gi pipe 2.5x2.5 inch sq hollow bar. 4 no FRP made Seat , 5inc water prof beyaring. Cover area 9feet x 5 feet.

Add GST @18%

Add L.W.C @ 1%

Please Enable Macros to View BoQ information