Construction of fallen boundary wall at Raja Bali Ka Garh Balirajgarh, Madhubani (Job Work)

Provision for demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside of protected area

Provision for 25 cm Diameter Pilling as foundation up to a depth of 3m including with all completed

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand free from Dust) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.

Provision for earth work in excavation for by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge, : All kinds of soil.

Brick work with common burnt clay F.P.S. (non modular) first class bricks in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Provision for centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts

Provision for dry brick pitching half brick thick in surface for PCC including supply of bricks and preparing the surface complete: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Provision for finishing walls with Acrylic smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr /10sqm over and including priming coat of exterior primer applied @0.90ltr /10sqm with all complete.

Provision for painting over steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.