Drilling of One no. deep bore hole with installation of Submersible pump and motor along with allied misc. works in Atal Colony under GM Unit, Argada Area CB 23-24.

Amount

Hydrological Survey for identification of aquifer layer

HYDT:Cost of drilling 225mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site. (a) from 0-50 meter( JSOR-sanitation-15-115(i))

HYDT: Cost of drilling 225mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site.(b) 51.00M to 125.00M G.I.( JSOR-sanitation-15-115(ii))

HYDT: Cost of drilling 225mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site.(c) 126.00M to250.00M G.I.( JSOR-sanitation-15-115(ii))

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia aving minimum wall thickness 5.40 mm DSR 24.10.3

Providing and fixing MS Cap of required dia to the top of the casing Pipe. Analysis based on 24.13.3

Supply of Chlorinated polyuvinyl Choride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threated fittings. 50 mm nominal outer dia. Pipes

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.24.14.3 200 mm clamp.

Labour charged for lowering of 100m PVC pipe, submersible motor, pump, cable adopter etc. with testing of electric, hekper etc all complete job.( Analysis rate)

Supply of Plastic rope of dia. 20mm.

Supplying 150 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and Bronze impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible Pump 150 mm dia (with Bronze impeller) up to 8 stages 5.0 HP.

Fully Automatic Star delta oil immersed submersible control panel Three Phase, 415 V suitable for 5 HP pump ISI marked of approved make

Supplying, Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed . 3 core 4 sq mm.

Part-B (Pipe line works) Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.50 mm dia. nominal bore.18.12.6

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.25 mm dia. nominal bore.18.12.3

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Total impact of GST for the purpose of CTC

MAQSOOD KHAN

BISHUN DEO GOPE

BINDESHWAR PRASAD

M/S HARSH PRASAD

RIDHI KUMARI

M/s NIDA CONSTRUCTION