Package No. TN- 5/2

Amount

1 EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil.

1.3 Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

4.1.1 Providing soiling in foundation and under floor with stone / best quality picked jhama brick , sand packed and laid to level and in panel after prepareing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. FOOTING BELOW FLOOR

2.1. PLAIN CEMENT CONCRETE WORKS 2.1.1 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement : 4 sand : 8 coarse aggregate by volume.

2.2 REINFORCED CEMENT CONCRETE WORKS 2.2.1 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine. (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser. c) M20 grade concrete.COLUMN, PLINTH BEAM

(B) In super structure from plinth level up to 1st floor level. Ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser. c) M20 grade concrete

3 SHUTTERING WORKS 3.1 TIMBER SHUTTERING (FRAMEWORK) 3.1.1 Providing form work of ordinery timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced. 3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) Using 38mm thick plank

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

3 PLAYBOARD SHUTTERING 3.2.1 Providing from work of 12mm thick plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc. , height of propping and centering below supporting floor to ceiling not etc. 3.2.1.1 Columns, Pillars, Posts & Strut of square / rectangular / Polygonal in plan or any shape like tee/L etc. having plane vertical face. COLUMN

3.2.1.2 Sides and sofits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

3.2.1.3 Flat Surfaces such as sofits of suspended floors, roofs, landings, cantelever slabs, chajjhas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

4 MASONARY WORK 4.1.4 Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (i) In Sub-structure upto plinth level including dewatering if necessary. ( C ) In proportion 1:5.

(II) In superstructure above plinth level upto 1st floor level. (b) in proportion 1:4 (1 Cement : 4 Sand) Deduction Door Deduction Window

4.1.8 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S. Rod /Tor steel of column to be embeded in cement motar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 Cement: 4 Sand)

6 CEMENT PLASTERING 6.2.2 15mm thick cement plaster insingle coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete (A) On rough side (b) In cement mortar 1:4 (i) For building-inside wall

6.25 Extra over item no 6.2.1 to 6.2.3 for plastering on ceiling and soffit of stair upto 1st floor level (instead of plaster on walls) including curing complete as directed.

5.11 ANTISKID TILES 5.11.1 Providing antiskid tiles of approved quality size, shapes thickness not less than 8mm on floor skirting over a cement mortar bed 15mm thick of 1:3 (1 Cement : 3 Coarse sand) approved fix with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement complete at all level as spesified and directed. (A) CERAMIC (i) Normal range (Sizes 300mm x (a) Orient made : Galaxy Brown,

ON WALL 5.7.1.1 Providing polished ceramic wall tiles of approved quality, Size, Shape and thickness not less than 8mm on walls and skirtings over cement moter bed 15mm thick in prop. 1:3 (1 Cement : 3 Coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed . (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).(Walls means both inerior and exterior walls).

9 WOOD WORK 9.1.2 Providing wood work in frame (Chowkaths) of doors, windows, clerestory windows and other similary works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying fitting and fixing with M.S. hold fast(40mm x 3mm x 250mm) as per design embeded in ceent concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified. (b) With first class timber (bonsun/sundi)

9.9 DOORS/WINDOWS/VENTILATORS/CLERESTORY WINDOWS 9.18.1 Providing, fitting and fixing factory made santro Flush door shutters having core and cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to3.5mm uniformly thick cross bands,styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately.) (ii) 35mm thick

18.5.2 Providing, fitting, fixing steel windows/ ventilators (fixed) of standerd rolled sections as per relevent I.S. code , joints mitred and welded with 15mm x 13mm x 1000mm lugsembeded in conc.block of M10 grade including applying a coat of red leard paint.

11.1.1 Providing, fitting and fixing anodised aluminium widows and ventilators of standerd sections of approveed brand without horaizontal galzing bars , joints mitred and welded fitted with 6mm x 3.15mm lugs 100mm long embeded in cc blocks……………as specified and directed for all levels (a) side hide and top hung window and ventilators (i) 6mm clear glass

12 P.V.C. DOORS 12.1 Providing, fitting aand fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levells.

12.2 Providing, fitting and fixing 24mm / 29mm thick polymer reinforced moulded PVC doors sutters fixed to the chowkhat with necessary hinges, screws, bolts etc. as specified and (b) 29mm thick

13 PAINTING 13.3.1 Providing surface preparation for walls , ceiling etc. using average 1.50mm thick plaster of paris including clearing , rubbing with sand paper filling gaps, depression etc. where necessary with chalck powder etc.

13.4.1 Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/Berger paint/ ICI paint / J & N paint / Nerolac) on new surface to give an even shade after throughly brushing the sufaces free from mortar dropping and other foreign matter and sand papered smooth. (a) Acrylic emulsion paint approved brand and manufacture (Asian paint / Berger paint / ICI paint / J & N paint / Nerolac)

13.6 PAINTING ON WOOD AND WOOD WOOD BASED SURFACES 13.6.3 Applying priming coat over new wood and wood based surfaces over 100mm in girth /width after and including preparing the surface by throughly cleaning oil, grease, dirt sand other foreign matter, sand paperingand knotting. (b) With ready mixed paint , wood primer (white).

13.6.5 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufactured (Asian paint/Berger paint/ ICI paint / J & N paint / Nerolac) to give and evenshade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping (a) General purpose (Asian paint/Berger paint/ ICI paint / J & N paint / Nerolac).

# DOOR AND WINDOW 15 ALUMINIUM FITTINGS 15.2.1 Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners , flaws and other defects and with counter sunk etc. (a) Sliding door bolts (ii) 250mm x 16mm

(b) Tower bolts (iii)200mm x 12mm

( C ) Door handles (ii) 100mm

(t) Door stopper with rubber stopper

18 STEEL AND IRON WORKS # REINFORCEMENT 18.1.1 Supplying fitting and fixing in position reinforecement bars confirming to relevent I.S. Code for R.C.C work R.B. walling including straigtening, cleaning, cutting and bending to proper shapes and length as per details, supplying and biding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (a) From Primary producer : TATA/ SAIL/ Esser Steel / Jindal Steel/ Shyam Steel/ RINL (i) TMT Corrosion resistant steel (CRS) reinforecement bars

5.1.4 65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6 and 15mm thk. Wearing layer in cement concrete in prop. 1:1:2 laid in panels and finished with a floating coat of bond @2.75 kg per sq.m of floor area incl. curing etc. complete as directed

19 PLINTH PROTECTION WORKS 19.1 Providing plinth protection 50mm thick to cement concrete 1:3:6 witrh course agg. Of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with floating coat of neat cement finished.

2.1.3 Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1:5:3 with graded stone agg. Of 10 down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

26 ANTI-TERMITE TREATMENT 26 PRE CONSTRUCTION ANTI-TERMITE TREATMENT 26.1.1 Pre construction anti-termite treatment at the bottom of foundation pits and walls on either side upto a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before staring (a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution Under footing

SEPTIC TANK (50 USERS) EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and raming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the exixting ground level. (a) In ordinery soil

2.1 PLAIN CEMENT CONCRETE WORKS 2.1.1 Plain cement concrete works with coars aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick work etc. as directed and specified including………………………….etc. (a) In prop 1 cement : 3 sand : 6 Coars aggregate by volume.

4 MASONARY WORK 4.1.1 Providing soiling in foundation and under floor with stone / best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

4.1.4 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (d) In proportion1:6.

4.1.8 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in Sub-structure upto plinth level. (A) 112mm thick brick wall ( c ) In cement mortar in

6.2 CEMENT SAND PLASTERING 6.2.2 15mm tick cement plaster in single coat on single or half brick wall for interior (B) On fair side (b) In cement mortar 1:4

DSR 2013-14 Neat Cement Punning

1.39 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified (II) 110mm dia PVC cowel ISI make

1.51 Construction of filter bed in soak pit including earth ……………….as mention in the table.

1.52 Construction of inspection pit………………as directed.

1.37.1 Supplying fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including jopining fitting and fixing wiyh clamps etc. as necessary complete at etc. (a) In expose surfaces or in trenches. (ii) 110mm dia.

(iv) 75mm dia.

PLUMBING 5.4.2 Cylinder vertical claused top (PCVC) tank syntex / Polycon / Patton make over the staging with manhole cover the locking and cleaning arangement including providing pads of size as required for inlet and outlet pipes. (iv) 1000 lts capacity SINTEX MAKE

1.2 EUROPEAN TYPE WATER Providing fitting and fixing vitreous china pedestal type water closet (Eropean type W.C. pan 400mm high) with seat and lead , CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required. 1.2(A) i. Parryware make (a) white (i) CO271) (Anglo Indian) inclusive all seat cover

1.8 China flat back type lipped front urinal basin with standrad flush pipe and CP brass spreader andrass unions, etc. complete including painting of fitting and brackets, cutting and making good he walls & floors whereever etc. (A) Parryware make a) White ii) Aquaseal

PVC FLUSHING CISTERN 1.5 Flushing cistern with all internal fitting with Cl brackets including fitting and fixing standard size CP flush pipe, union clamps etc. Complete as directed and specified (pipes will be measured separately) White/(i) Economy Single Flush (Cat No. C8090/C8055)

WASH BASIN Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) 1.13.2 Basin (with out pedestal) (A).(a) C0450

C.P FITTINGS & ACCESSORIES MIRROR 1.2 Providing fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified.

SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER 1.2 Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and (iv) SONA make

3.2 BIB COCK 3.2.1 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Clarion (i) Standard

3.3 STOP COCK 3.3.2 Plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified. (G.I. & C.P. pipes will be measured and paid separately) (I) Clarion/(ii) 15mm dia (Angular stop cock)

PIPES & FITTINGS 1.4 PIPES, BENDS, JUNCTIONS, TEES ETC. 1.5 Flowguard CPVC pipes………testing of joints complete at all levels as directed and specified. i. Internal wall-exposed on wall a. 15mm OD

b. 20mm OD

1.2 Providing, fitting and fixing stainless steel kitchen sink of parryware……………As required A/(iii) Single Bowl with Drain Board(360x180) flat edge-glossy.

4.2 Socket, Reducing Socket 4.2.1 Renewing G.I. Socket Zololot-m brand, heavy a. 15mm OD

b. 20mm OD

c. 25mm OD

4.3 BEND Renewing G.I. BEND, heavy quality as specified and directed a. 15mm Od

b. 20mm OD

c. 25mm OD

4.4 TEE, REDUCING TEE, REDUCER Renewing G.I. TEE, heavy quality as specified and directed a. 15mm OD

b. 20mm OD

c. 25mm OD

Internal Electrification (as per Estimate)

External Electrification (as per Estimate)

OFFICE BUILDING EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

1.3 Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

4.1.1 Providing soiling in foundation and under floor with stone / best quality picked jhama brick , sand packed and laid to level and in panel after prepareing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

2.1 PLAIN CEMENT CONCRETE WORKS 2.1.1 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick work etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

2.2 REINFORCED CEMENT CONCRETE WORKS 2.2.1 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser c) M20 grade concret

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser c) M20 grade concrete

3 SHUTTERING WORKS 3.1 TIMBER SHUTTERING (FRAMEWORK) 3.1.1 Providing form work of ordinery timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) Using 38mm thick plank

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

3.2 PLYBOARD SHUTTERING (FORMWORK) 3.2.1 Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concerte and plain concrete work in: 3.2.1.1 Columns, Pillars, Posts & Strut of Square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face.

3.2.1.2 Sides and soffits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

3.2.1.3 Flat Surfaces such as sofits of suspended floors, roofs, landings, cantelever slabs, chajjhas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

4 MASONARY WORK 4.1.4 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (i) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5.

(II) In superstructure above plinth level upto 1st floor level. (b) in proportion 1:4 (1 Cement : 4 Sand)

4.1.8 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S. Rod /Tor steel of column to be embeded in cement motar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4 (1 cement : 4 sand)

6 CEMENT PLASTERING 6.2.2 15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

6.25 Extra over item no 6.2.1 to 6.2.3 for plastering on ceiling and soffit of stairs up to 1st floor level (instead of plaster on walls) including curing complete as directed.

TILES WORK 5.7.1.1 Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (C) Dulex range (Somant/Orient/Nitco Varmora Make) (i) Of size 300mm x300mm and above

5.11 ANTISKID TILES 5.11.1 Providing antiskid tiles of approved quality size, shape thickness not less than 8mm on floor skirting over a cement mortar bed 15mm thick of 1:3 (1 Cement : 3 Coarse sand) approved make fix with Fix-A-Tile (Choksey / Sika / Pedelite/Rouf) / white cement complete at all level as specified and directed. (A) CERAMIC i) Normal range (Sizes 300mm x 300mm and above) (a) Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

ON WALL 5.7.1.1 Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15mm thick in prop. 1:3 (1cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). A) Delux range (Somant/ Orient/ Nitco Varmora Make) (i) Of Size 300mm x450mm and above

9 WOOD WORK 9.1.2 Providing wood work in frame (Chowkaths) of doors, windows, clerestory windows and other similary works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying fitting and fixing with M.S. hold fast (40 mm x 3 mm x 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With first class timber (bonsun/sundi)

9.9 DOORS/WINDOWS/VENTILATORS/CLERESTORY WINDOWS 9.18.1 Providing, fitting and fixing factory made santro Flush door shutters having core and cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (ii) 35 mm thick.

18.5.2 Providing, fitting, fixing steel windows/ ventilators (fixed) of standerd rolled sections as per relevent I.S. code , joints mitred and welded with 15mm x 13mm x 1000mm lugs embeded in conc. block of M10 grade including applying a coat of red leard paint.

11.1.1 Providing, fitting and fixing anodised aluminium widows and ventilators of standerd sections of approved brand without horaizontal galzing bars , joints mitred and welded fitted with 6mm x 3.15mm lugs 100mm long embeded in cc blocks……………as specified and directed for all levels. a) side hung and top hung window and ventilators (i) 6mm clear glass

12 P.V.C. DOORS 12.1 Providing, fitting aand fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levells.

12.2 Providing, fitting and fixing 24mm / 29mm thick polymer reinforced moulded PVC door sutters fixed to the chowkhath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately) (b) 29mm thick

10 GRILLS 10.2 Providing, fitting and fixing M.S. grill of required pattern for windows / clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I) Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C.

PAINTING 13.4.1 Providing surface preparation for walls, ceiling etc. using average 1.50mm thick plaster of paris including clearing, rubbing with sand paper filling gaps, depression etc. where necessary with chalck powder and plaster of paris paste making the surface even smooth complete all direction.

13.4.1 Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic Emulsion Paint approved brand and manufacture (Aaian paint/Berger paint /ICI paint/ J & N paint/ Nerolac)

14 PAINTING ON WOOD AND WOOD WOOD BASED SURFACES 13.6.3 Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (b) With ready mixed paint, wood primer (white)

13.6.5 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufactured (Asian paint/Berger paint/ ICI paint / J & N paint / Nerolac) to give and even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. a) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

13.7.2 Applying priming coat over new steel and other metal surface over 100mm in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine steels, wood scrapers and sand paper. a) With ready mixed "red-lead/ red oxide" primer.

13.7.4 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ ICI paint / J & N paint / Nerolac) to give and even shade including cleaning the surface of all dirt, dust and other foreign matter. a) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

15 DOOR AND WINDOW FITTINGS # ALUMINIUM FITTINGS 15.2.1 Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners , flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) (a) Sliding door bolts (ii) 250mm x 16mm

b) Tower bolts iii) 200mm x 12mm

c) Door handles ii) 100mm

t) Door stopper with rubber stopper

18 STEEL AND IRON WORKS 18.1 REINFORCEMENT 18.1.1 Supplying, fitting and fixing in position reinforecement bars conforming to relevent I.S. Code for R.C.C work/ R.B. walling including straigtening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer : TATA/SAIL/ Esser Steel/ Jindal steel/ Shyam steel/ RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar

5.1.4 65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6 and 15mm thk. Wearing layer in cement concrete in prop. 1:1:2 laid in panels and finished with a floating coat of bond @2.75 kg per sq.m of floor area incl. curing etc. complete as directed.

19 PLINTH PROTECTION WORKS 19.1 Providing plinth protection 50mm thick to cement concrete 1:3:6 with course agg. Of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with floating coat of neat cement finished.

2.1.3 Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1:5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

26 ANTI-TERMITE TREATMENT 26 PRE CONSTRUCTION ANTI-TERMITE TREATMENT 26.1.1 Pre construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. Under footing.

PLUMBING 5.4.2 Supplying and placing plastic cylinder vertical claused top (PCVC) tank Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. iv) 1000 Its capacity SINTEX MAKE

1.2 EUROPEAN TYPE WATER CLOSET Providing fitting and fixing vitreous china pedestal type water closet (European type W.C. pan 400mm high) with seat and lead , CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) 1.2(A) i. Parryware make a. white (i) Universal Closet S trap (Cat NO. CO271) (Anglo Indian) inclusive of seat cover.

1.8 Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standrad flush pipe and CP brass spreader andrass unions, etc. complete including painting of fitting and brackets, cutting and making good he walls & floors whereever required. (A) Parryware make a) White (ii) Aquaseal

PVC FLUSHING CISTERN 1.5 Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (pipes will be measured separately) i) Parryware make/a) White/(i)Economy Single Flush (Cat No. C8090/C8055)

WASH BASIN 1.1 Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) 1.13.2 Basin (with out pedestal) (A).(a) (i) Star Basin 550x400 (cat. No. C0450)

C.P FITTINGS & ACCESSORIES MIRROR 1.2 Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER 1.2 Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (iv) SONA make

3.2 BIB COCK 3.2.1 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Jaquare make/ (a)Continental /Clarion (i) Standard

3.3 STOP COCK 3.3.2 Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified. (G.I. & C.P. pipes will be measured and paid separately) (I) Jaquar/(a) Continental/Clarion/(ii) 15mm dia (Angular stop cock)

PIPES & FITTINGS 1.4 PVC PIPES, BENDS, JUNCTIONS, TEES ETC. 1.5 Supplying, fitting and fixing Ajoy Flowguard CPVC pipes………testing of joints complete at all levels as directed and specified. i. Internal wall-exposed on wall a. 15mm OD

b. 20mm OD

1.2 Providing, fitting and fixing stainless steel kitchen sink of parryware……………As required A/(iii) Single Bowl with Drain Board(360x180) flat edge-glossy.

4.2 Socket, Reducing Socket 4.2.1 Renewing G.I. Socket Zololot-m brand, heavy a. 15mm OD

b. 20mm OD

c. 25mm OD

4.3 BEND Renewing G.I. BEND, heavy quality as specified and directed a. 15mm OD

b. 20mm OD

c. 25mm OD

4.4 TEE, REDUCING TEE, REDUCER Renewing G.I. TEE, heavy quality as specified and directed a. 15mm OD

b. 20mm OD

c. 25mm OD

Internal Electrification (as per Estimate)

External Electrification (as per Estimate)

PASSE EARTHWORK IN EXCAVATION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil.

1.3 Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

4.1.1 Providing soiling in foundation and under floor with stone / best quality picked jhama brick , sand packed and laid to level and in panel after prepareing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a). Brick on flat soling.

2.1 PLAIN CEMENT CONCRETE WORKS 2.1.1 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement : 3 sand : 6 coarse aggregate by volume

2.2 REINFORCED CEMENT CONCRETE WORKS 2.2.1 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser c) M20 grade concrete

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser c) M20 grade concrete

3 SHUTTERING WORKS 3.1 TIMBER SHUTTERING (FRAMEWORK) 3.1.1 Providing form work of ordinery timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) Using 38mm thick plank

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

3.2 PLYBOARD SHUTTERING (FORMWORK) 3.2.1 Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face.

4 MASONARY WORK 4.1.4 Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary ( c) In proportion 1:5.

4.1.8 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S. Rod /Tor steel of column to be embeded in cement motar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4.(1 cement :4 sand)

6 CEMENT PLASTERING 6.2.2 15mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 i) For Building-Inside wall i) For Ground Floor & 1st Floor BRICK WALL ONE SIDE

PAINTING 13.2.2 WALL PAINTING 13.3.1 m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade of new wall surface to give an even shade over and including a prining coat with distemper primer of approved brand and manufacture after thoughly brooming and other foreign matter and including prepareing surface surface even sand papered smooth.

13.3.1 Providing surface preparation for walls, ceiling etc. using average 1.50mm thick plaster of paris including clearing, rubbing with sand paper filling gaps, depression etc. where necessary with chalck powder and plaster of paris paste making the surface even smooth complete all direction.

13.4.1 Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a). Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

18 STEEL AND IRON WORKS 18.1 REINFORCEMENT 18.1.1 Supplying, fitting and fixing in position reinforecement bars conforming to relevent I.S. Code for R.C.C work/ R.B. walling including straigtening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer : TATA/ SAIL/ Esser Steel/ Jindal steel/ Shyam steel/ RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

18.3 ROOF TRUSS 18.3.2 Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923: 1997

8.1 ROOFING 8.1.33 Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately). TATA Blue scope /Dyna roof / Durakolor / Wonder Roof or equivalent as directed by the Departement (i) 0.40 mm thick

Electrical Work (as per Estimate)

ROADS P-63/11.1 Excavation of Structures Earthwork in excavation for structures as per drawing and technical specifications clauses 305.1 including setting out, construction of shoring and bracing, removal of stumps and others deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with exacavated suitable material. I Ordinary soil upto 3 m depth

1.3 Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

P-163 M-105 Polythene Sheething(125 Micron)

Safety devices P-95/16.24 Cast in Situ Cement Concrete M20 kerb (Construction of cement Concrete kerb with top and bottom width 115 and 165 mm respectivly, 250 mm high in M20 grade PCC on M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. A Using Concrete Mixture

P-63/11.4 Providing concrete for plain/reinforced concrete in open foundation complete as per drawings specifications cluse 802,803,1202 & 1203 B With natural Gravel III. P.C.C Grade M20 (1:2:4)

5.7.3.4 Providing polishin tiles of approved quality, size, shape and specefied thickness on pavers over a base of 100 mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A Tile (Choksey /Sika /Pedelite/ Rouf) /white cement slurry mixed with approved pigment to maatch shade of tiles complete at all levels as specified and directed. (Cooured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (A) SUN ROCK HIGH CTS Tiles (Pavers) (a) Silicon (Pavers) 60mm thick

FOR SITTING SIDE

1.1 RAISING LOW SITE Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying nessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shinkage to be made from total quantity) etc. complete as directed and specified. b. other than Guwahati city. 12.5% shinkage

1 MBTC Three Seater Stainless Steel Waiting Area Visitor Chair THREE SEATER CHAIR

GAUTAM BRAHMA