Renovation of 5 Nos room, prepainted sheet roofing and tile work at Hotel Yamuna Poanta Sahib Distt. Sirmour (H.P).

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead and lift as per the directions of Engineer-In-Charge For thickness of tiles 10 mm to 25 mm.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material in specified manners and disposal of unserviceable material within all lead as per direction of Engineer-in-charge. In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of unserviceable material within all lead as per direction of Engineer - in - charge. (Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking useful materials in specified dimensions as per the direction of Engineer-In-Charge including disposal of unservicebale materials of area 3 sq. metres and below.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking of serviceable material in specified manners and disposal of unserviceable material within all lead Of area 3 sq. meters and below.

b) Of area beyond 3 sq. meters

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking of serviceable material in specified manners and disposal of unserviceable material within all lead of Asbestos cement sheet.

Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km periphery area for all lifts, complete as per directions of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level: 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate) 40 mm nominal size) as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level: 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick incluidng carriage of materials within all leads and lifts.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) incluidng carriage of materials within all leads and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars incluidng carriage of materials within all leads lifts and heights. Tata/Sail/Jindal/Panther or equivalent.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) incluidng carriage of materials within all leads lifts and heights.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) incluidng carriage of materials within all leads lifts and heights.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (In Sal wood) incluidng carriage of materials within all leads lifts and heights.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm Second class teak wood incluidng carriage of materials within all leads lifts and heights.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width of aperture 1.4mm in both directions with wire of Dia 0.63mm for doors, windows and celerstory windows with hinges and necessary screws. 35mm thick shutters in 2nd class teak wood incluidng carriage of materials within all leads lifts and heights.

Providing & fixing Flush Doors on 32mm block board, 4mm veneer of Greenply on both side fixed with necessary screws, nails, fevicol complete as per approved drawing and design including carriage of material in all leads and lifts complete incluidng carriage of materials within all leads lifts and heights. Century/Kitply/Green or equivalent make.

Providing & fixing Flush Doors on 32mm block board, 4mm veneer of Greenply on one side and laminate on one side fixed with necessary screws, nails, fevicol complete as per approved drawing and design including carriage of material in all leads and lifts complete incluidng carriage of materials within all leads lifts and heights. Century/Kitply/Green or equivalent make

Providing & fixing LED panel of size 1.20x0.90 Mtr with 19mm ply with necessary screws, nails, fevicol complete as per approved drawing/design and as per the direction of Engineer-In-Charge including carriage of material in all leads and lifts complete

Providing and fixing floating counter having size 1.23x0.40x0.20 mtr (Avergae) below LED panel of 19mm board, 4mm ply Merino/Green/Kit Ply or equivalent make., 1 mm thick Sunmica on top, teak ply, sliding channels heltic make for drawers complete fixed with necessary nails and screws, painting & polishing etc as per the direction of Engineer-In-Charge including carriage of materials in all leads and lifts.

Providing and fixing Wallpaper on LED Panel per drawing and design supplied by architect fixed with adhesive complete as per the direction of Engineer-In-Charge including carriage of material in all leads, lifts and heights.

Providing and fixing laminated bed back with foam sheet of 32 density sleepwell on a 9mm thick ply board and 12mm ply Merino/Green/Kit Ply or equivalent make fixed on wall complete fixed with necessary nails and screws, painting & polishing etc as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and Fixing cup board of 19mm thick waterproof board (front, back, top, bottom & shelve), 4mm veneer on exterior side, margin, mica inside cupboard, catchers, piano hinges, granite top, etc with butt jointing fixed with necessary nails, fevicol and screws etc complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. Century/Kitply/Green or equivalent make

Providing & fixing 10mm clear tuffened glass for shower encloser fixed with necesasry accessories i.e. clamps, SS rods making hilti and silicon complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. Saint Gobain/Modi Guard or equivlent make

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing bright finished brass 100 mm mortice latch and lock of approved make Godrej or equivalent make with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved make Godrej or equivalent make quality with necessary screws etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing bright finished brass tower bolts (barrel type) of approved make (heavy duty) with necessary screws etc. complete : as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 200x10mm

Providing and fixing bright finished brass tower bolts (barrel type) of approved make (heavy duty) with necessary screws etc. complete : as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 150x10mm

Providing and fixing bright finished brass handles of approved make (heavy duty) with screws etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. (a) 125mm

Providing and fixing bright finished brass handles of approved make (heavy duty) with screws etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. (b) 100mm

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 2nd class teak wood (50x12mm).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. (Hot finished welded type tubes). Tata/APL Appolo/Jai Bharat

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. Kajaria/Nitco/RAK or equivalent make.

Providing and fixing tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. (8mm tickness) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. Kajaria/Nitco/RAK or equivalent make.

Providing and fixing coloured Ceramic glazed tiles (Nitco/Kajaria/Rak make) of size 6 to 8 mm thickness in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry including carriage of materials in all lead and lifts and heights of size 600x300mm as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing 8 to 10mm thick heavy duty Coloured Ceramic glazed tiles Nitco/ Kajaria/Rak make 600 x 600 mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing 8 to 10mm thick heavy duty vetrified tiles (Double charged) 600 x 1200mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. Kajaria/Nitco/RAK or equivalent make.

Providing and fixing 8 to 10mm thick heavy duty vetrified tiles (Double charged) 600 x 600mm (Nitco/Kajaria/RAK make) manufactured as approved by Engineer-In-Charge approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. ( Granite work) as per the direction of Engineer-In-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm thick with alltype of coating with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. TATA Duroshine or equivalent make.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.60 mm thick with all coating, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. TATA Duroshine or equivalent make.

Providing and fixing M.S. BP Sheet Rold Cold 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer incluidng carriage of materials within all leads, lifts and heights.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar foreign matters sand papered smooth to give final matter finish to the surface completeas per direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Wall Painting ( two coats) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease, loose pieces of scale and sand papered smooth including applying of putty a required for making the surface as per direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Melamine polishing on wood work (one or more coat) of approved shade and finish as per the direction of Engineer-In-Charge including surface cleaning of all dirt and dust ,sand papered smooth including a coat of wood filler including carriage of materials within all leads, lifts and heights.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) incluidng carriage of materials within all leads, lifts and heights.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Renewing glass panes, with wooden fillets wherever necessary. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and laying brick bat filling in depression portion of slab/stairs as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Heavy Duty) tube fittings and clamps including making good the wall, ceiling and floor as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 15mm nominal bore. TATA/Jindal or equivalent make.

Providing and fixing Bib cock (Long body) of Jaquar Make Cat No. CON-107KN or equivalent series of Cera/Jal make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing GI Gate valve of 15mm Dia of Zolato/Leader or equivalent make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of approved make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm normal outer dia pipes as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing PVC pipe Finolex/D-Plast/Supreme or equivalent make ventilating pipes jointed with standard quality adhesive as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . a) 75mm Dia

Providing and fixing PVC pipe Finolex/D-Plast/Supreme or equivalent make ventilating pipes jointed with standard quality adhesive as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. b) 110mm Dia

Providing PVC Finolex/D-Plast/Supreme or equivalent make fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. a) Door Bend with joints i) 80mm

Providing Finolex/D-Plast/Supreme or equivalent make fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. ii) 110mm

Providing PVC Finolex/D-Plast/Supreme or equivalent make fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heightsPlain Bend with joints i) 80mm

Providing PVC Finolex/D-Plast/Supreme or equivalent make fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights 110mm

Providing PVC Finolex/D-Plast/Supreme or equivalent make fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights c) Colar with joints i) 80mm

Providing PVC Finolex/D-Plast/Supreme or equivalent make fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights ii) 110mm

Providing & fixing vitreous Snow White colour rimless Single piece water closet with UF soft close slim seat cover, hinges, fixing accessories, accessories set and cistern fittings of Jaquar make (Ornamix) Cat No. ONS-WHT-10853S300UFSM or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing vitreous Snow white colour Jaquar make Thin rim counter top wash basin with single hole complete fixed with nut, bolts including carriage of material in all leads and lifts. Cat No.JDS-WHT-25907N or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing vitreous Snow white colour Jaquar make under counter wash basin with fixing accessories complete fixed with nut, bolts including carriage of material in all leads and lifts. Cat No. FLS-WHT-5701 or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P brass wall mixer with over head shower and bath head pipe Jaquar make (Continental) Cat No.CON-167KNB or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P brass single lever Tail body basin mixer Jaquar make (Continental Prime) Cat No.COP-005BPM or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P brass angle valve 15 mm Dia Jaquar make (Continental) Cat No.CON-059KN or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP brass towel rack 600mm long with lower hangers of Jaquar make Cat No. CAN-1181S or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP brass towel rail 600mm long of Jaquar make Cat No. AKP-35711PSor equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP brass towel ring of Jaquar make Cat No. AKP-35721P or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP brass soap dish of Jaquar make Cat No. ACN-1131N or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP brass toilet paper holder of Jaquar make Cat No. ACN-1151N or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP brass robe hook of Jaquar make Cat No. AKP-35761P or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P. brass bottle trap 32 mm Dia with 250mm and 190mm long wall connection pipes and wall flange for wash basin and sinkJaquar make Cat No.ALD-769L300x190 or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P waste coupling Jaquar make Cat No.ALD-705or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP grating 100mm Dia including cutting floor tile and fixing with white cement mixed with pigment matching with shade of floor tilesor equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P brass shower arm for wall mounted shower Jaquar make Cat No.SHA-455L400 or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P brass rain shower Jaquar make Cat No.OHS-1619 or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CP health faucet (Heavy duty) with flexible pipe of Jaquar make Cat No. ALD-573 or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing PVC long braided hose with two 15mm nuts & rubber washers without nipple connection pipe of 450 mm length of Jaquar make Cat No. ALD-805B or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing C.P brass basin mixer with swinging spout Jaquar make (Clarion) Cat No. CQT-23309B or equivalent series of Cera/Jal as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing CPVC gate valve 20mm outer Dia (Avg) of Finolex or equivalent make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing PVC floor trap 75 mm dia for wash basin and sink as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Providing and fixing 5mm thick ornamental looking mirror of Modi Guard or equivalent make Company grinding complete fixed with necessary clamps as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights

Virender Thakur

Vikrant Sharma