Supplying, Installing, Testing & Commissioning of 13 Nos. Bullet Camera & It’s Related items for Outside High wall at Joint Interrogation center, Sardarnagar, Ahmedabad (Second attempt)

Supply of 4MP Fixed Lens IP Bullet Camera with 1/2.7" PS CMOS sensor delivering 2688 ×

resolution up to 25/30 fps, supporting H.265, H.264 and MJPEG compression with quad-stream

capability. The camera shall feature 120 dB WDR, Day/Night (ICR), 3D NR, ROI, motion detection,

tripwire and intrusion (SMD), and be equipped with a 3.6 mm fixed lens (F1.4). It shall provide dual

illumination with IR range up to 50 m and warm light up to 30 m, along with built-in microphone and RS:Ten Thousand Six

1 audio support. The camera shall support micro SD card up to 512 GB, PoE (802.3af), ONVIF 13.00 Nos. 10683.00 Hundred Eighty Three

compliance, and operate on 12 VDC/PoE. The housing shall be metal with IP67 and IK10 protection, only

suitable for outdoor and vandal-resistant applications.( Make:- Tyco / Matrix / Bosch / Mobotix / CP-plus

& model as per STQC certified brand.) (As per attached Technical specification)

SITC of PVC Back Box with all aceessories

RS: Two Hundred Eighty

Eight only

Supply of 16-Channel Network Video Recorder (NVR) with 16-channel IP camera input supporting

maximum 384 Mbps incoming, recording and outgoing bandwidth, and compatible with H.265, Smart

H.264+, H.264 and MJPEG decoding formats. The NVR shall support advanced AI by recorder

including 2-channel face detection and recognition with capacity for up to 20 face databases and

20,000 face images, along with 4-channel perimeter protection or 8-channel Smart Motion Detection

(SMD). AI by camera shall support face detection and recognition, perimeter protection, Smart Motion

RS: Forty Three Thousand

Detection, video metadata, ANPR, stereo analysis, heat map and people counting. The system shall

3 1.00 Nos. 43286.00 Two Hundred Eighty Six

support 2 SATA HDDs up to 20 TB each, provide dual USB ports (1 × front USB 2.0 and 1 × rear USB

3.0), and support HDMI/VGA heterogeneous video output. The NVR shall be compatible with multi-

brand ONVIF network cameras and support remote access through mobile applications. ( Make &

Model Apperoved By EIC subject to Above Specification ) (As per attached Technical specification)

Supply, Installation, Testing and Comissioning of 10 TB Enterprice HDD for 30 days motion based

recording with 4.0 MP resolution ,4.0 MP bit rate ,H.265 compration and 25 FPS( Make:- WD / Toshiba RS: Twenty Two Thousand

4 / Seagate) 2.00 Nos. 22240.00

Two Hundred Forty only

SITC of 55 Inch 500 NTS Brightness professional Display for veiwing CCTV camera's (24 hours

working condition) with Direct-Type LED, Viewing Angle : 178 Degree Verti, 178 Degree Hor.

Operation 24x7, Native Resolution 3840 x 2160 (16:9) - UHD, 4 x USB (2 x 2.0, 1 x 2.0 internal, 1 x

Type C), 0-40°C, ≤0.5 W, HTML 5 Browser Opera(4.9), Yes(internal) IEEE 802.11 a/b/g/n Dual

RS: Eighty Two Thousand

5 WiFi certificated, BIS, YES CLASS A 3dB margin.(make:- Sony/ Samsung / Panasonic / Vestel 2.00 Each 82409.00

Four Hundred Nine only

make & industrial model only)

Supply, Installation Testing & Commissioning 5 Mtr. HDMI Interface Cable as per the detailed

Specifications supports transmission of 4K Signals as per the detailed Specifications RS: Eight Hundred Twenty

Supply, Installation, Testing and Commissioning of HDMI Range Extender with USB (Transmitter &

Receiver) suitable for transmission of HDMI signal along with USB (KVM) function over single

CAT6/CAT6A/CAT7 cable, complete as required.The extender shall support HDBaseT or IP-based

transmission technology and shall be capable of transmitting video signals up to 1080p @ 60Hz or up

to 4K @ 30Hz / 60Hz as per site requirement. The unit shall support USB 2.0 / 1.1 for remote operation

of source computer through keyboard and mouse. The system shall have a minimum transmission

range of 60m to 100m over CAT6 cable in point-to-point configuration and shall be extendable over

longer distances through network switches in IP-based system. The Transmitter (TX) unit shall be RS: Thirteen Thousand

7 provided with 1x HDMI Input, 1x USB-B (to PC), 1x RJ45 Out. The Receiver (RX) unit shall be provided 1.00 No 13743.00 Seven Hundred Forty Three

with 1x HDMI Output, 2x to 4x USB-A (for peripherals), 1x RJ45 In. The system shall include EDID only

management for resolution compatibility and IR extension facility for remote operation of source

devices. The complete system shall be supplied with all necessary accessories such as power

adapters, interconnecting cables, mounting hardware, etc. as required for proper installation and

operation. ( Make - Kramer, Impressions, Milestone, Extron, Crestron & Model Apperoved By EIC

subject to Above Specification )

Supply, Installation, testing and commissioning of UTP 4 pair 23 AWG CAT 6 LAN Cable in the

existing surface/ recessed steel/ PVC conduit as required. Cable 305 mtr per Box.

Blue/Orange/White/Green in colour conforming to the following standards like ANSI EIA/TIA 568.2-D,

EN50173, IEC 11801 3rd ED, frequency tested upto 400Mhz with Third Party Certificate etc. Cable Dia

6.1 ± 0.3, Cross-member (+) fluted Spine/isolator for uniform separation for all pairs. with other petty

8 1000.00 Mtr. 43.00 RS: Forty Three only

material,RJ 45 jack with ferruling etc. complete as required & approved by the Engineer In charge (the

wire is to be drawn from patch panel to outlet point)& as per attached details specification. For CAT6

UTP 23AWG Solid ( Make:- Molex/Commscope Systemax/ Legrand/Panduit)

Supply, Installation, testing and commissioning of 6 core OS2 - loose tube outdoor/corrugated steel

tape with Unitube construction Crush Resistance 2000N with 8.5 mm Diameter and confirming to

IEC/EN 60793-2-50 class B1.3 ITU G.652.D EN 50 173-1:2007 ISO/IEC 11801:2002 ISO/IEC

9 650.00 Mtr. 50.00 RS: Fifty only

24702:2006- through existing GI/HDPE/ Hume pipe or on cable trays inside the cable duct including all

necessary fixing accessories e.g. cable ties, hardware etc. (Make: Molex/ Panduit/ Siemon/ TYCO)

Supply, Installation, testing and commissioning of 19" slide-in modular optic drawers with galvanised

steel accommodates up to 4 fibre optic units, 4 cables, accommodates up to 12 LC connectors. Should RS: Six Thousand Eight

10 meet EN50173 and ISO/IEC 11801 operating specifications. (Make: Molex/ Panduit/ TYCO) 4.00 Nos. 6833.00

Hundred Thirty Three only

Supply, Installation, testing and commissioning of Single Mode OS2 LC-LC Duplex Fiber Patch Cord -

1 mtrs. Conform to IEC, ANSI-TIA, and Telecordia performances requirements. (Make: Molex/ RS: One Thousand Eight

Panduit/ TYCO) Hundred Eighty Three only

SITC of company fabricated CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator

Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of

5m Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL RS: One Hundred Fifty Five

12 VW-1 with tensile strength >50N.& as per attached details specification. For 1 Mtr. ,Plug 30U' Snag 15.00 Nos. 155.00

less. ( Make:- Molex/Commscope Systemax/ Legrand/Panduit)

Supply, Installation, Testing and Commissioning of 1000BASE-LX Fiber SFP modules 1G for 10 km,

LC for Single Mode Including 5 Years Warranty as per tender specifications. (Make:D-Link, Netgear, RS: Four Thousand Seven

HP Enterprise) Hundred Fifty Four only

Supply, installation, testing and commissioning of DIS-F200-10PS 8-Port PoE+ Gigabit Managed

Industrial Ethernet Switch suitable for outdoor/industrial applications, having 8 × 10/100/1000Base-T

PoE/PoE+ ports compliant with IEEE 802.3af/at standards supporting up to 30W per port with total

240W PoE budget, and 2 × 1000Base-T/SFP combo uplink ports, with 20 Gbps switching capacity, 8K

MAC address table, Layer 2+ features including VLAN (up to 4K VLANs), STP/RSTP/MSTP, Rapid

Ring Protection, IGMP Snooping, QoS, ACL, IPv4/IPv6 static routing, and security features such as

802.1X authentication, DHCP Snooping and IP Source Guard; complete with Web GUI, SNMP and

RS: Forty Eight Thousand

14 SSH management, dual redundant 48–57V DC power input, IP-30 rated rugged metal DIN-rail mount 3.00 Nos. 48300.00

Three Hundred only

enclosure, operating temperature range -40°C to +75°C, and conforming to UL/IEC/EN, CE, FCC and

RoHS standards, including all necessary accessories for proper installation and commissioning. (As

per attached Technical specification) ( Make:- D-link, Netgear, HP Enterprise & model Strictly

approved by EIC subject to above)

Supply, Installation, testing and commissioning of 24 port Cat 6 19" Toolless Patch Panel ( fully

loaded) enable all possible combinations of the various types of cable mounted on the same panel by

using various toolless connector blocks/modules. Have a metal structure enabling them to be durably

fixed to the uprights of the 19” chassis and assuring automatic grounding between toolless RJ-45

connectors, the panel, and the 19” uprights of the enclosure. Include rear cable support with plastic

cable guides to hold cable without need for cable ties. Include quick mounting system to mount the

RS: Four Thousand Three

15 panel into the 19” rails without use of cage-nuts. These may be used to secure the connections of wifi 3.00 Nos. 4357.00

Hundred Fifty Seven only

access points, IP cameras, servers, or other critical devices. Front Removal IO's option for

maintenance and trouble shooting with 6 Different Colours Labels for Labelling & Identification of

Individual Ports. As per attached details specification. (CAT 6 ) ( Make:- Molex,Commscope Systemax/

Legrand/Panduit)

Supply, installation, testing and commissioning of 19” 6U (600×600 mm) Wall Mount Outdoor Rack (E-

ROD series), IP65 certified water and dust proof enclosure complying with DIN-41494 and international

19” standards, fabricated in welded full hybrid powder-coated rigid steel construction with minimum

kg load carrying capacity, suitable for wall or pole mounting, having bottom cable entry provision, front

metal lockable door with filter, fan mounting provision on top and complete weather-protected design;

the rack shall be supplied complete with 2 pairs of adjustable 19” mounting rails, 5/15 Amp power RS: Eleven Thousand

16 distribution strip with 5 sockets and inbuilt MCB, side-mounted cooling fan, one full depth tray, rack 3.00 Nos. 11042.00

Forty Two only

frame, mounting angles and all necessary mounting hardware and accessories, complete for proper

installation, testing and commissioning as directed by Engineer-in-Charge. (As per attached Technical

specification) (Make: Valrack/ Elixir/ APW President/ Rittal)

Executing comprehensive (All -in-All) service & maintenance contract with spare parts & consumable

item with qualified & experience agency approved by EIC . Agency Has to maintain all ELV system

like CCTV System, Data & voice networking, UPS with replacing Battery etc. During defect liability

period and copy of this contract will be submitted before final bill. Agency has to quote rate accordingly.

Agency has to also provide the fitness certificate from system and submit to GSPHCL. Agency has to

submit FDR of approved bank as per clause 2.0 of section -3, Rs.14,450.00+GST or quoted amount RS: Fourteen Thousand

which ever is higher to GSPHCL. for minimum maturity period of Four years in favour of GSPHCL,. Four Hundred Fifty only

Which will be released after successful completion of AMC & at the completion of defect liability period.

System agency has to maintain written record of service & maintenance during defect liability daily

period duly sigh JIC dept. and submitted regularly to GSPHCL.

Agency has to give minimum Twelve service per year & Break down service and demonstration and

testing and training of all ELV system like CCTV System, Data & voice networking, UPS with

replacing Battery etc. During defect liability period to GSPHCL Authority and necessary certificate from

department and submitted to GSPHCL. Agency has to do maintenance as per standard maintenance

practice & OEM Guide line. Agency has to submit current repairing, Preventive maintenance & break

down Services details with Final Bill, The Purpose of AMC is to provide seamless services to JIC

department , Maintain Security Level in the campus & to reduce Replacement Of Parts & Increases the

Efficiency & Actual Life Span of The System. The necessary certificate / photographs for that must be

submitted.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat

cum-boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The

charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac

with 0.8 load power factor with SMF maintenance free battery, over/under voltage output with over RS: Twenty Nine Thousand

18 load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint 1.00 Each 29323.00 Three Hundred Twenty

with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary Three only

load. ( Make- Numeric( Legrand), APC(schneider), Socommec) For 1 KVA with 1Hr Backup

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC

PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with

19 adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains with 700.00 Mtr. 33.00 RS: Thirty Three only

necessary fittings and junction boxes for following dia. For 25 mm. dia.

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24)

2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material properties

with necessary connecting accessories of same material at required depth to be laid 90 cms. under

RS:One Hundred

20 ground for laying of cable below ground / road surface for enclosing cable and back filling the same to 1000.00 Mtr. 117.00

Seventeen only

make ground as per original. For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

Submitted)

Providing following type of Modular Type Accessories mounted with 20 G company fabricated metalic

box, single mounting base frame covered with textured / metallic front plate, modules erected with RS: One Hundred Fifty

21A 5.00 Each 150.00

necessary connection. As desired by Engineer in charge. For One No. SP 6 Amp Cat. -III only

For One No 5 pin plug Cat. -III RS: One Hundred Fifty

21B 5.00 Each 150.00

For 16Amp SP one way switch Cat-III RS: One Hundred Seventy

21C 5.00 Each 179.00

For 6/16Amp. Universal Socket Cat-III RS:One Hundred Ninty

21D 5.00 Each 198.00

Eight only

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil.

Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made from Corrosion

free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,

Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

RS: Seven Thousand

22A suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of earth 1.00 Each 7025.00

electrodewith inside conductive material minimum should be 26 kg. Twenty Five only

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back

Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth and

Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all

detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth

tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing must be done

in the presence of A.E. (GSPHCL)]

For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in earth

RS: Two Hundred Seventy

22B pit (certificate for soil have to given by DEE / AE along with photographs) 1.00 Each 276.00

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing pipe of

23 following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) 10.00 Mtr. 56.00 RS: Fifty Six only

with required size of copper lugs, nuts and bolts if required. For One wire 6.00 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of RS: Two Hundred Thirteen

following size of cable.. For 3 core 2.5 Sq. mm only

Providing and erecting 240 volt MCB double pole switch for M&I(C Curve) having 10 KA Breaking

capacity and confirms to IS : 8828 in existing with earthing terminal having following capacity. with RS: Two Hundred Ninty

25 necessary quarter Numbering with oil paint by Painter. For 6-32 Amp Capacity. 1.00 Each 297.00

Seven only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following type

of RCCB, RCCB + MCB with necessary numbering / marking with oil Paint by painter. For 2 pole [Box RS: Two Hundred Seventy

must be of same company as MCB, ELCB used] Two only

Removing existing interlocking paver blocks from the surface area for the purpose of underground

cable laying work, stacking the removed paver blocks safely without damage, laying of cable with

proper sand cushioning and protection, backfilling and thereafter re-fixing the same paver blocks in

27 original position with proper alignment, level, and joint filling, including making good the surface to 1.00 Job 10000.00 RS: Ten Thousand only

match the existing condition, complete as directed by Engineer-in-Charge.

Carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with providing PVC pipe

of 3 mm thick inside and necessary finishing on both ends of wall . RS: One Thousand Five

Hundred Thirty Four only

Total Amount Rs.

Total Amount Rs.

Assistant Engineer (Ele.) Dy. Ex. Engineer (Ele.) Executive Engineer (Ele.)

Ahmedabad Vadodara Gandhinagar