PROVN OF GARAGE FOR B VEHICLES AT ARO LUDHIANA AT CG COMPLEX AND SPECIAL REPAIR TO BLDG NO T-93 DHOBIGHAT SHED AND WASHING POINT OF INF BN (TA) SIKH AT CG COMPLEX UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Surface Excavation n.exc 30m deeps and averaging 15 cm deep and getting out in soft & loose soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft and loose soil.

M&L for PCC (1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

M&L for RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete

M&L for RCC M-25 design mix as in Columns, pillars, piers, posts and struts

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 08 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft and loose soil.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping).

Ditto as per item No 08 above but 6mm to 8mm dia for slab.

M&L for RCC M-25 design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 .

M&L for 15mm thick rendering in cm 1:4 on other than fair faces of brick work in internal faces

M&L for 12mm thick rendering in cm 1:6 on fair faces of brick work on external surface of wall

M&L for 5mm thick ceiling plaster in CM 1:3 on concrete surfaces

M&L for two coats of cement based paint over one coat of primer over new plaster surfaces of any description on walls

M&L for three coats of white wash for new prepared surface on wall

M&L for three coats of white wash for new prepared surface on ceiling

M&L for 150mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregateas in sub base.

M&L for 100mm thick PCC 1:2:4 Type B-1 using 20mm graded stone aggregateas in flooring

M&L for 75MM thick PCC 1:3:6 Type C2 using 40mm graded stone aggregate as in plinth protection complete.

M&L for hard core not exc 63mm dia complete all as specified.

M&L for 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor.

M&L for 80mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.

M& L for sand filling under floors or in foundations incl. watering and consolidation.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

M&L for forming, contraction (Dummy) joints 65 mm deep x 10 wide filled with sealing compound Grade 'A'.

M&L for forming construction joint 30mm deep and 10mm wide filled with sealing compound Grade - 'A'

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid), of Type B1 1:2:4 (12.5 mm graded aggregate including all mouldings but excluding frame and Set in cement mortar 1:4. (pre cast frame shall be measured separately and paid for under item 04032)

M&L for wire brushing neat cement slurry with 3kg of cement per sq m at top and bottom of base coat and cleaning top surface all as specified

M&L for 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound , finished even and fair complete all as soecified. Note :-water proofing compound will be measured and paid separately under other item.

Supply only integral water proofing compound.

M&L for priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot.

M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application complete all as specified.

M&L for 40mm thick brick tiles laid on Screed bed of cement mortar (1:4) 15mm thick finished even and fair and joints grouted flush in cement mortar 1:3 mixed with 5% 0f crude oil by weight of cement

M&L for flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3.

S&F for mild steel framed work as in gate of angle & other sections with gusset plates, wheel track etc complete hooks for steel hanging door fittings also fastening and fixing complete in GDE i.e. Fe 410-W (Gde E-250) quality A.

M&L for two coats of synthetic enamel paint on one coat of Red oxide primer on newly steel surface over 10 cm in width or girth, complete all as specified & as directed.

Demolition of cement concrete (unreinforced) concrete in ground floors and paving n-exc 15cm thickness ( below or above ground floors.)

M&L for 40mm thick cemnt concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in floorings , finished even and smooth without using extra cement complete all a specified and directed laid in alternate bay

M&L for 50mm thick cement conc one 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement.

M&L for 25mm thick cement concrete type B-O, 1:2:4 (20mm graded agg ) as in flooring finished even and fair.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.06 Sqm but n.exc 0.11 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises .

M&L for glazed ceramic coloured designer pattern tiles / printed tiles 450X350X7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4

Ditto all as per itme no 51 abvoe but in skirting/dado laid over 10mm thick cement screed in cm 1:4 complete all as specified

Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar atc.

M&L for machine cut kota stone 20-25mm thick as in slab, flooring & tread of steps over 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified.

Ditto all as per item No 54 above but in riser of steps, skirting & dado laid over 10mm thick cement screed in CM 1:4

Demolition of brick built in cm including all quoins arches pillars etc.

M&L for brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cm 1:6.

Ditto all as per item No 57 above but except bricks

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

M&L for 15mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement in cm1:4.

M&L for preparing of new plastered surface and applying two coats cement base paints on walls.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore

Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 20mm bore .

Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 25-32mm bore .

S&F for tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore.

-ditto- as per item No 65 above but 20mm bore.

-ditto- as per item No 65 above but 32mm bore.

Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore.

-ditto all as per item No 68 above item but 20mm bore.

S&F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F for 32 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F for stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repairs.

S&F for Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore.

Dismantling Asbestos cement corrugated sheet in roof covering all as specified.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) quality A all as specified and as directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint over a coatof red exide including preparation of new steel surfaces of any description over 10cm in width or grith not other wise described. Complete all as specified and directed.

S&F for Ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed in repair 20mm bore.

S&F in repairs Rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1,,including dismanteling water tanks and removing to storecomplete all as specified.

Taking down chowkhat or frame with shutter(without taking off shutter from frame) exc 1.5Sqm and nexc 4Sqm.

M&L for framed work as in doors or gate,coolers stand of angle or others section etc confirming to Fe 410-s .

Taking down eaves gutter and rain water pipes (of any size and patern), incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries)

S&F for 75mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls

S & F for PVC (SWR) bends 110 mm dia

M & L for point wiring with PVC unsheathed, fire resistance, stranded copper conductor of size 1.5 sqmm (nominal cross sectional area ) single core cable in and including concealed (surface only on roof & colomns) wiring incl PVC conduit medium grade, ISI marked, 20 mm or higher dia complete with all accessories/fittings and sunkan MS boxes of thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with screws & washers including unsheathed single core PVC insulated cable green in colour 1.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, for one light /fan point controlled by one , one way 5/6 switch. complete all as specified & directed.

All as per item No 85 here in before but One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, oneway switch single pole 5/6Amps

All as per item 86 here in before but One 5 pin 5/6 Amps socket outlet point on the same board with other switches /socket.

All as per srl item No. 85 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F for switch piano flush type white /ivory finish 5/6 Amps, single pole one way complete all as specified & directed by Engineer In-charge .

S&F for switch piano flush type white /ivory finish 15/16 Amps single pole one way complete all as specified & directed by Engineer In-charge .

S&F for socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type complete all as specified & directed by Engineer In-charge .

Ditto as per item no 91 but 3 pin 5/6 Amps & 3 pin 15/16 Amps complete all as specified & directed by Engineer In-charge .

S&F for ceiling rose surface Bakelite AC 220/240 volts 3 terminals complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 20 Watt LED lighting fixture (4 Ft) with trimline is a robust high performance batten and LED luminaire comprises of extruded channel in thermally conductive material and high translucent serrated milky white diffuser is used to get glare free and smooth light distribution and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

Supply and fix for LED security light fittng 1x30/35watt powder coated pressure die cast aluminium campect for building security purpose with bracket made of GI pipe medium grade suitable size and length bend to shape as required and fixing with two nos MS clamp of suitable size for fixing of building security light fitting complete all as specified and directed by Engr in Charge.

S&F for MCB, single pole 240 Volts 5 to 30 Amps complete all as specified & directed by Engineer-In-charge.

S&F for Isolator single pole and neutral 240 Volts 40 Amps complete all as specified & directed by Engineer-In-charge.

Supply and fixing for factory made sheet metal enclosures SPN 8 way double door 240 v with 200 Amps rated bus bar for DB,s suitable for having MCB / Isolator flush with wall complete all as specified and directed by Engr in Charge

M& L for earthling complete with galvanized steel earth plate, electrode 600 x 600x 6 mm thick , buried directly under ground (earth pit not less than 2.25 m below ground level ) with top edge of the plate not less than 1.5 below ground level connected to galvanized earth wire 4.0 mm dia by means of nuts, bolts, check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No 3 connected to main switch board, including all necessary excavation & earth work in hard/dense soil, common salf and charcoal dust mixed & packed 150 mm thick homogeneous layer all around the GI earth plate, earth pit chamber made out of cast iron frame with hinged door , GI protection pipe light grade upto 7.5 meter from electrode complete all as specified & shown on drawings with watering pipe. Note :- (1) Earth lead and GI pipe light grade 15 mm dia for protection against mechanical damage beyond 7.5 mtr from electrode to earth terminal point/main switch board. Etc shall be measured separately . (2) On testing, after completion of Job , if desired earth resistance is not obtained , the earthing shall be redone at no extra cost to contractor.

Removal of surplus soil (any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed & complete all as specified and directed by Engr - in - Charge.

Supplying and laying bricks common brunt clay building bricks sub class B incl removing of old bricks complete all as specified and directed by Engr - in - Charge.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed by Engr - in - Charge. Note: Punning down thickness 18 cm shall be measured.

Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 10 Sqmm.

Taking down carefully Copper/aluminium point wiring (Light, Fan, Socket or Power) complete with all accessories & making good to disturb surfaces of wall, ceilings etc.

ANUJ ABROL CONTRACTOR

PK ENTERPRISES

JAY ANN CONSTRUCTION COMPANY

PREM CONSTRUCTION COMPANY