ARC for Erection of UG CABLE and Maintenance work at Laying and Maintenance of UG 11 KV XLPE cable for SI,SKJY & ND SCHEMES and Maintenance only, including supply & erection of cable joint kit as and when required basis at VASAD S DN & any other sdn.of Borsad division Area. of the ALL Scheme for VASAD & any other Sub Division under Borsad DO

SCHEDULE - B PR NO 229805 TD ID:321980

WAT for Laying and maintenance of UG 11 KV XLPE cable for ND,SKJY and maintenance scheme only , including supply & erection of cable joint kit as

and when required basis at VASAD & any other sdn.of Borsad div.

Item Code No. Description of Work Unit Qty. Rate in Rs.

EXCAVATION OF TRENCH FOR SINGLE CABLE BY PROVIDING HALF ROUND RCC PIPE 6" LAYING OF RCC

HUME PIPE 6" PER MTR.(The cable should be laid on bed of sand and to cover cable with half round RCC pipe 6"

internal dia and length of one meter along with each bottom and top.) The entire trench there after should be refilled

with earth dully rammed up to ground level Meter 1000

Excavation of trench 0.75Mtr. Wide and 1 Mtr. Deep for laying of double HT/LT underground cable of size upto

300Sq.mm PILC or XLPE.(The cable should be laid on bed of sand and to cover cable with half round RCC pipe 6"

internal dia and length of one meter along with each bottom and top.)The entire trench there after should be refilled

with earth dully rammed up to ground level Meter 1000

Laying/Relaying of cable in Cable trench & from ground level to pole structure for providing outdoor cable joints. Meter 1000

Laying / Relaying XLPE/PILC cable by digging of pits, removal of old cable and laying of new cable on sand bad (The

cable should be laid on bed of sand and to cover cable with half round RCC pipe 6" internal dia and length of one

meter along with each bottom and top.) The entire trench there after should be refilled with earth dully rammed up to

ground level Meter 100

5 9913000016 WIDENING & REFILLING WITH EARTH PER MTR Meter 100

6 9913000041 Charges for digging of tar road for laying of cables over and above digging of pit in normal soil Meter 100

Laying of U/G 11KV XLPE cable by Push & Pull method (BY Horizontal Directional MACHINE)thru with HDPE

pipe140mm Diameter,6mm thickness or 6" or 4" diameter GI Pipe without damaging surface of the road by horizontal

boring / drilling method (Excluding cost of HDPE pipe or 6" or 4"GI Pipe) as per Drawing and specification Meter 4800

8 9913000049 Providing and supplying, fixing route marker of 150mm x 150mm concrete stone (MGVCL marked) embedded in Earth Running

at least 300mm below the G.L. & 450mm above G.L. at distance approx. 100mtr. Along the length of cable. Meter 1000

9 9913000050 Providing and supplying, fixing route marker of 150mm x 150mm concrete stone (MGVCL marked) embedded in Earth Running

at least 300mm below the G.L. & 450mm above G.L. at distance approx. 100mtr. Along the length of cable. Meter 100

10 9913000009 PROVIDING & SUPPLYING, FIXING ROUTE MARKER Number 100

Supply of HDPE pipe for laying 11KV XLPE cable 140mm diameter & 6mm thickness as per IS:4985 Meter 500

Supply of medium grade GI pipe of size 6" dia.(Including clamping the cable with pole) Meter 250

Supply of half round RCC hume pipe 6" internal dia & length of 1 Mtr. Meter 1000

14 9902050002 ERECTION OF CABLE JOINT FOR XLPE CABLE (STRAIGHT/INDOOR/OUTDOOR) Number 100

15 9902050002 ERECTION OF CABLE JOINT FOR XLPE CABLE (STRAIGHT/INDOOR/OUTDOOR) Number 100

16 411000015 11 KV INDOOR CABLE BOX FOR 185 SQMM XLPE CABLE Number 20

17 411000056 11 KV INDOOR CABLE BOX FOR 240 SQMM XLPE CABLE Number 10

18 411000006 11 KV OUTDOOR CABLE BOX FOR 185 SQMM XLPE CABLE Number 10

19 411000058 11 KV OUTDOOR CABLE BOX FOR 240 SQMM XLPE CABLE Number 10

20 413000020 11KV STRAIGHT THROUGH JOINT FOR 185 SQMM XLPE CABLE Number 10

21 411000060 11KV STRAIGHT THROUGH JOINT FOR 240 SQMM XLPE CABLE Number 10

Preparing of Digital map of underground network by capturing Geographical co-ordinates with GPS Instrument

(having accuracy within 1.0 Mtr) and superimposing the digital map on high resolution Google map. Kilo Meter 5

Supply & fixing labour charge for providing Bricks (size 9"X 4"X3")layer (4" side layer 10 Nos of Bricks per meter

length of cable Top side + 9" side layer 4.5 nos X 2 side=10+9=19 Nos /Running Meter) for 11KV XLPE Cable

Mechanical protection (only top sied layer) at cable ring (loop) location, as per instruction of Engineer in Charge @

Rs. 4/- per Bricks current market rate F.O.R Site delivery Number 290

Add : Charges for digging of tar road for laying of cables over and above digging of

pit in normal soil as per Sr.No. 1. Meter 1

Supply & laying in cable trench at 300 mm to 450 mm deep from ground level Warning Tape of 8" Eight inch width of

300 micron LDPE materials for protection of U/G Cable laid undergound during any excavation work as per instruction

of Eingineer in Charge (Rs. 9 per Mtr Material Cost + Rs 2.50 per Mtr F.O.R. Site carting & laying labour charge above Running

cable in excavated trench = Rs. 11.50 per Meter ) Meter 48

TOTAL AMOUNT in ₹

TOTAL AMOUNT in ₹

1 Schedule quantity may be increase or decrease but total order value will not increase.

2 Time limit for ABove work is 365 days from date of issue work order

On receipt of Sub work Order, immediately contact Engineer Inchargeof Concern S/dn for line marking of erection work and work carried out as per tender drawings and REC

4 Work should be carried out under supervision of authorized MGVCL staff only.

5 T.S wise / Work wise material account of sub works order must be given separately.

6 The materials requisition (M.R) should be collected from Concern Sub Division office

If work is dealy for non-availABility of any material or objection of line erection work, must be inform to Concern

S/dn office in writing.

8 For extension of time limit of work order, you have to submit written request letter with valid genuine reason.

In case of any excess work required while actual execution of work you have to give written intimation to this office &

No excess work should be carried out without prior written permission / approval from competent authority.

10 Above work has to be carried out at any s/dn of Borsad Division as and when required.

11 For live electric line crossing work, work should be carried out after Power cut-off and earthing of Line.

12 As the Schedule include supply and erection of UG cable joint kit, it must be provided within 24 hr of information given to you by any field officer telephonically.

13 Do necessary Entry in CBDU portal and any damage caused to public infra during UG cable erection work to be bourn by contractor

Signature of Contractor Executive Engineer

SCHEDULE - B PR NO 229805 TD ID:321980

WAT for Laying and maintenance of UG 11 KV XLPE cable for ND,SKJY and maintenance scheme only , including supply & erection of cable joint kit as

and when required basis at VASAD & any other sdn.of Borsad div.

Item Code No. Description of Work Unit Qty. Rate in Rs.

with Stamp MGVCL, DO, Borsad.