Annual Rate Contract for Providing and Applying Hot Thermoplastic Road Marking Paint (Asian, Burger and As Per MORTH) with Glass Beads in EZ (A and B) Bridges within Surat Municipal Corporation Limit.(2ndAttempt)(Work No.7)

PROBABLE DATE OF OPENING TECHNICAL BID Dt.04/08/2026 10.00 hrs onwards (Probable)

TENTATIVE PRICE BID OPENING Dt.13/08/2026 10.00 hrs onwards (Probable)

ESTIMATED AMOUNT Rs. 52,63,781=87 (Excluding GST)

CLASS "D" or Equivalent and Experience

TENDER TO BE SUBMITTED TO:

THE CHIEF ACCOUNTANT,

SURAT MUNICIPAL CORPORATION, SHRI TAPIBHAVAN, TAPIPURA

SURAT MUNICIPAL CORPORATION

BRIDGE DEPARTMENT

Annual Rate Contract for Providing and Applying Hot Thermoplastic Road Marking Paint (Asian, Burger & As Per MORTH)

with Glass Beads in EZ ( A & B )Bridges within Surat Municipal Corporation Limit.(2nd attempt)(Work No.7)

SCHEDULE - B S.O.R : 2024-25

Item Description Qty. Rate (Rs.) Per (unit) Amount (Rs.) Remarks

1 Road Marking With Hot applied Thermoplastic compound paint with

reflectorising Glass Beads on Bituminous/A.C.C./C.C. road surface.

Providing and laying of hot applied thermoplastic compound 2.5 mm

thick including reflectorizing glass Beads and 250gms per Sq.mt. area

thickness of 2.5 mm is exclusive of Surface applied glass beads as per

IRC-35.The finished surface to be level/uniform and free from streaks

and holes or chipping of Thermoplastic Rate includes brushing, 8886.15 367.72 Sq.Mt.

brooming and cleaning and application of paint.

NOTE: THE THERMOPLASTIC PAINT SHALL BE OF ASIAN,

BERGER & As per Ministry Of Road Transport & Highways

(MORTH) guidelines.

(a) Center Line / Edge line

2 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised

Pavement Markers made of polycarbonate and ABS moulded body and

reflective panels with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face and shall support a

load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with minimum

reflective area of 13 Sqcm on each side and the slope to the base shall be

35 +/- 5 degree. The strength of detachment of the integrated cylindrical 9182.00 217.40 Nos.

shanks, (of diameter not less than 19 +/- 2 mm and height not less than

30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing

will be by drilling holes on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as per manufacturers

recommendation and The color of the marker should be as per the IRC

35-2015 and as directed by engineer in charge. (3M Brand Only)

Total Estimated Amount in Rs. =

(IN WORDS FIFTY TWO LACS SIXTY THREE THOUSAND SEVEN HUNDRED EIGHTY ONE AND EIGHTY SEVEN PAISA ONLY)

Executive Engineer (Bridge Department)

Surat Municipal Corporation

Signature of Contractor