Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹48.8 L+₹5.4 L (12.5%)Rejected-Finance INS VALSURA JAMNAGAR | JAMNAGAR | GUJARAT | 360520 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹50.0 L+₹6.6 L (15.2%)Rejected-Finance | L3 | Rejected-Finance Not being L1 |
Tender Value
₹44.0 L
EMD Value
₹88,020
Closing Date
2 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) Navy Jamnagar
INS Valsura, Jamnagar - 361150
Addn/ Altn and improvement to bldg No. P-15 at INS Valsura, Jamnagar
2023_MES_577020_1
8644/VAL/E8
Open Tender
Civil Works
Item Rate
180 days
GE (I) Navy Jamnagar
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE (I) Navy Jamnagar
₹88,020
Yes
30 Mar 2023
24 Jan 2023
4 Mar 2023
24 Jan 2023
2 Mar 2023
18 Feb 2023
24 Jan 2023 - 17 Feb 2023
Amount
Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MoD land complete all as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MoD land complete all as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal of entire debris as ordered outside MoD land complete all as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliate demolition) including removal of entire debris as ordered outside MoD land complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MoD land complete all as directed.
Dismantling wrough iron or mild steel work of any description not other wise provided for and stacking at site complete all as directed.
Dismantling of cast iron of 100mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of 100 mm / 150mm internal dia set in cement mortar including bedding and haunching.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.
All as per item No. 9 here-in-above, but exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Taking down shutters (including fittings & fixtures) of any description not exc 1 Sqm, complete all as specified and as directed.
Re-fixing shutter of any description not exceeding 1 Sqm each including easing and adjusting of shutter as required including renewal of unserviceable screws in the same or other opening as ordered after other repair works are carried out complete all as directed.
Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.
Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed.
Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.
Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed.
Removing excavated surplus soil to a distance exceeding 50m but not exceeding 250m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed.
M&L for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.
M&L for providing and injecting chemical emulsion for post construction Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litres per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same to match with the existing finish complete all as specified and as directed.
M&L for PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified.
M&L for PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) for making of PCC block to support tapping pipe for foundation standpost of water outlet and similar works including necessary form work complete all as specified.
M&L for plain cement concrete 1:2:4 type B0 (using 12.5 mm graded granite stone aggregate) as in padding concrete to the roof slab of average thickness of 30 mm thick and similar works complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed granite stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.
M&L for factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:4 complete all as specified.
M&L for factory made pre cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks or slabs, 10 cm thick (plain or interlocking joints) and setting in CM 1:4 complete all as specified.
M&L for providing precast cement concrete 1:2:4, Type B1 (using 20 mm graded crushed stone aggregate) as in landings, kitchen shelves, manhole cover, Chajjas etc. and similar articles with plain faces and set in cement mortar 1:4 complete all as directed.
M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers lintels over 1.5m span complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat fair finished surface all as specified.
Cutting holes in brick works of size not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required including making good as per its original specification without any extra cost complete all as directed.
Cutting chases in brick/ stone wall, pinning in, making good to facing where required and plastering in CM 1:4 to ends of edges of landing, steps, cills, lintels etc and cutting chases not exceeding 10 cm girth for concealed water tubing and similar works and making good cutting as per its original specfication complete all as directed.
Supply only Integral Water Proofing Compound (ISI Marked) of Make: CICO, Acco Proof, Impermo, Aqua flex, Dr Fixit, Pedelite as approved by GE.
S&F Second class hard wood kiln seasoned, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed in position complete all as specified and as directed.
S&F 30 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (b) supplied and fitted to chowkats.
S&F 35 mm thick flush shutter with solid core construction with block board core and plywood face panels, commercial type on both sides including exposed surfaces finished with external teak wood lipping, 6mm thick fixed with nails and both side 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern and approved, fixed with approved adhesive as per manufacture's instructions complete all as directed.
S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balacing white lamination, fixed with screws to timber frame work as in pelmet, almirah/cupboard shutters and the like complete all as directed.
S&F factory made fibre glass reinforced plastic (FRP) door frames of three legged of cross section 90x45 mm having single rebate 32x15 mm to receive shutter of 30 mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyster resin and chopped mat. Door frame laminate of 2 mm thick and filled with suitable wooden block in all three legs. The frame shall be covered with fibre glass from all sides. Mild steel stay shall be provided at the bottom to steady the frame.
S&F factory made 30 mm thick fibre glass reinforced plastic (FRP) paneled door shutter made with fire retardant grade unsaturated polyester resin moulded to 3 mm thick FRP laminated for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5 mm thick FRP laminated for panels.
S&F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.
S&F 100 mm size stainless steel butt hinges (ISI Marked), medium weight.
S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.
S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws.
S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.
S&F 100 mm hasp and staple, safety type of aluminium, anodised, including bolts to hinge type, fixed with screws complete all as specified.
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm
S&F Stainless steel Magnetic catch complete all as specified and as directed.
S&F 60 cm long stainless steel telescopic channels of superior quality, with & including all necessary accessories for sliding racks, drawers, etc complete all as specified & as directed. Make : GODREJ / HETTICH / EBCO / Arrow or equivalent make as approved by GE.
S&F in repairs stainless steel drapery rod of 20mm inner dia & 1mm wall thickness (in lengths as directed) with & including stainless steel sockets & decorative finial at both ends and pair of stainless steel brackets & stops fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified & as directed. Note : Length of steel screw shall not be less than 50mm.
S&F XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.
S&F in repairs collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and as directed.
S&F mild steel hold fasts of flat iron confirming to Grade E-165 (Fe 290) and similar items.
S&F factory rolled Hot dipped galvanised (80 microns as per IS 4759) Mild Steel sections confirming to Fe 410-W (Gde E-250) Quality-B as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats or other connecting plates and similar works complete all as specified and as directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 (Gde-E-165).
M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
All as per item No. 54 here-in-above but 5mm dia and over upto 10mm dia as in stirrups -do-
S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/ ridges/ cladding to walls fixed with self tapping screws complete all as specified & as directed. Note : Colour of sheet shall be as approved by the GE.
Material and labour for removal of existing WPT course or any other kind of treatment surface over roof slab and cleaning of surface with wire brushes and water, removing of unsolvent materials and depositing of the same outside MoD land and provide 15 mm thick screed bed/ bedding layer in CM 1:4 mixed with Water Proofing Compound (WPC) as per manufacturer's instructions, including finishing the surface fair and even on RCC roof/ parapet once bedding layer of concrete is completely dried and apply oil based bitumen primer @ 0.20 Kg per sqm of the surface area and providing 4mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure as directed and finally finished the top surface with one coat of solar reflective aluminium bituminous paint complete all as specified and as directed. Notes: (i) The quoted rate is deemed to be inclusive of taking down & removal of debris, preparation of roof surface complete, 15 mm thick plastering mixed with WPC, oil based bitumen primer, Solar reflective aluminium bituminous paint & complete APP treatment. (ii) The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iii) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (iv) The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.
M&L for cutting out cracks to 'V' section in existing roofs or terrace cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.
M&L for 25mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) for levelling the undulated floor after dismantling complete all as directed.
M&L for 75 mm thick plain cement conctere 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection, hard standing, etc, finished the surface even and smooth without using extra cement, complete all as specified & as directed. Note : Plinth protection shall be of width as directed and shall be laid with an outward slope of 1:40 in alternative bays not exceeding 2.5 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic filling comprising 1 part of heated bitumen Blown grade any penetration and 3 parts of sand (all by weight). Quoted rate of this item shall deemed to include this provision.
M&L for 40 mm thick PCC 1:2:4, type B1 (using 20 mm graded crushed granite stone aggregate) as in sub base, floors, pavings, levelling course, etc, finished fair and even complete all as specified and as directed.
M&L for 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, pavings etc. finished fair and even complete all as specified.
M&L for rectified jointless vitrified ceramic tiles 8-9mm thick (square/ rectangular) double charged/ ultra charged area of each tile exc 0.18 sqm but n exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as directed and as specified.
M&L for non-skid coloured ceramic tiles 400x400x7 to 8 mm thick (square/ rectangular), in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.
M&L for glazed ceramic coloured tiles of size 600x300x7 to 8 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick back coat in CM 1:4 set complete as specified and as directed. (Note for item Nos 63 to 65 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved from GE before incorporation in the work)
S&F Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, cills, raiser, under wash basins, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using pigment to match with shade of granite laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. (Note: Quoted rate is deemed to be inclusive of Screed bed)
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (10mm & 5mm thick) on brick/ block/ stone masonry surfaces other than fair faces of brick work mixed with WPC as per manufacturer instruction, and finished the surface fair and even complete all as specified and directed. (Note : WPC measured and paid separately).
M&L for rendering 15 mm thick in CM 1:6 on brick/ block/ stone masonry surfaces other than fair faces of brick work with sagol finish and finished even and smooth without using extra cement complete all as specified.
M&L for 2mm thick heritage finish plaster using 2mm thick granules mixed with chemicals complete all as directed.
Raking out joints/ raised pointing to block in squared rubble, coursed or uncoursed masonry or concrete block walling in CM 1:3 complete all as specified and as directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1mm thick white cement based wall care putty complete all as specified and as directed.
M&L for preparing new plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1mm thick white cement based wall care putty complete all as specified and as directed.
M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick white cement based wall care putty complete all as specified and as directed.
M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1mm thick white cement based wall care putty complete all as specified and as directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections not exceeding 0.5 Sqm in each pane complete all as directed.
S&F 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.
M&L for two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.
M&L for two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.
M&L for two coats of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.
M&L for French polishing two or more coats till to obtain mirror finish on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified.
Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 15mm bore complete all as specified and as directed.
Dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 20mm bore complete all as specified and as directed.
Fixing/Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 15mm bore obtained serviceable vide serial item No. 83.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
S&F in repairs 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed.
S&F in repairs 15mm bore bib taps with wall flange, fancy type, cast copper alloy, chromium plated, long shank screwed for iron pipe or for brass ferrule complete all as directed.
S&F in repairs cast copper alloy chromium plated two way bib taps with health faucet with 1.2m brass flexible tube of length as ordered and wall hook mounted type for EWC.
S&F in repairs 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down highpressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as directed.
S&F in repairs 15 mm bore angle cock, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as directed.
S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.
S&F towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms) complete all as directed. Make : Prayag or equivalent in approved make.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and guard rail 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified and as directed.
S&F 50 mm bore low density polyethylene pipes (LDP) of pressure rating 6 kgf/cm2, laid in floors complete as directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.
S&F 75 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.
S&F 110 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.
S&F 110 mm bore size PVC (SWR) bends any radius including jointing the same with solvent cement complete all as directed.
S&F 110 mm bore size PVC (SWR) junction single (single T) equal or unequal including jointing the same with solvent cement complete all as directed.
S&F PVC (SWR) Vent cowl 110 mm bore size fixed complete all as directed.
S&F 100 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.
S&F 75 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.
M&L PVC (SWR) gully trap 125/110 mm including jonting the same with solvent cement complete all as directed.
S&F in repairs PVC connection 15mm bore and 60cm long with two Nos of brass check nuts and washers complete all as directed.
S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or cutting and fixing into granite platform including fixing cantilever brackets and connecting union to pipe overall size 495 x 420 mm bowl size 410mm x 330mm x 160mm complete all as directed.
S&F in repairs 550 mm x 400 mm size ( white) flat back, vitreous china wash hand basin including cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as specified and as directed.
S&F in repair vitreous China ware wash down water closet pan (Pedestal Pattern) (EWC), white (excluding flushing cistern and flush pipe) with fixing bolt to floor and connecting pan to trap, pedestral pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as directed.
S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as directed.
S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as specified and as directed.
Dismantling of existing any type & any capacity water storage tank fixed in any position and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including brass float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.
M&L for concrete bed in PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregrate) to 150mm bore drain pipe including packing and haunching completely surrondings of the pipe after they are laid and tested complete all as specified and as directed. (Note: Hume pipe measured and paid seperately)
M&L for Reinforced concrete pipe 150mm bore Class NP2 (ISI Marked) alongwith collar laid to slope in trenches over PCC bed & jointed in cement mortar 1:3 and tested on completion complete all as specified and directed.
Chipping/ Dismantling of spall / loose damaged concrete from soffits of RCC slab / other RCC structural members in a controlled manner carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete upto good parent concrete to expose the existing reinforcement (direct hammering should be avoided) average thickness of 50-75 mm including cleaning the exposed surfaces by air jet, with wire brushes, etc. to remove any loose materials, dust, etc for further treatment all as per the direction of Engr-in-Charge.
M&L for single layer of polymer modified cementitious high strength repair mortar {Compressive strength after 28 days ≥ 50 N/sqmm (According to ASTM C109)} as per site requirement (minimum 20mm thickness) all as per manufacturer’s instructions, complete all as specified and as directed. Make : Dr Fixit / Sika / Fosroc
M&L for cleaning existing reinforcement bars with wire brush / rotary wire brush making the surface free from cement skin, loose particles, dirt, etc and applying rust remover (Reebaklens RR of Fosroc/ Conmix RR / 'Rustoff 100' of Sika / '8832 GM' of Pidilite or equivalent of Dr. Fixit). Apply epoxy - Phenolic based anti corrosive coating (BASF make Master Emaco P 130/ Nitrozinc Primer of Fosroc/ Recon Zinc of Conimix or equivalent of Dr. Fixit / SIKA / Pidilite) over the exposed reinforcement in two coats and allow the coating to cure in air for atleast eight hours before starting further treatment. The entire concrete surface shall be applied with concrete penetrating corrosion inhibitor solution. (EPCO KP 100 Krishna Conchem or equivalent of Dr. Fixit / SIKA / Fosroc / Pidilite) on lintel/ beam/ slab etc. all as per the direction of Engr-in-Charge and all as per manufacturer’s instructions, complete all as specified and as directed.
M&L for providing and fixing rebar (TMT bar) of following diameter & length with epoxy resin (‘AnchorFix-3’ of Sika / ‘MIT600RE’ of Mungo / ‘FIS EB 390 S’ of Fischer / ‘HIT-RE 500 V3’ of Hilti) wherever required in structural members including power drilling, cleaning of holes, inserting rebars in holes, filling with epoxy resin to ensure the bond as per site requirement, complete all as per manufacturer’s instructions and as directed :-
10mm dia and 300mm long.
8mm dia and 300mm long.
Providing, fixing and removing of water tight shuttering (Form work) using film coated 12mm thick plywood sheets for micro-concreting the lintels/ beams/ slabs in line and level and with proper support of average thickness 50-75mm including scaffolding upto 7.5m height and all safery measures of labourers complete all as specified and directed. Note : Formwork under this item shall be measured and paid only for repair of RCC members with micro concrete.
Supply and fixing steel Injection Packer (12 mm dia & 60-75 mm long) including drilling of holes, fixing of Packer with 'Sikadur-31' of Sika or its equivalent of Dr. Fixit / Fosroc and cutting of packer by cut of wheel after completion of grouting, complete all as per manufacturer’s instructions and as directed.
Supply and filling shrinkage free low viscosity injection resin based on high strength epoxy resin ('Sikadur-52' of Sika or equivalent of Dr. Fixit / Fosroc), complete all as per manufacturer’s instructions and as directed.
M&L for non shrink cementitious micro concrete (‘SikaRep Microcrete-4’ of Sika or equivalent of Dr. Fixit / Fosroc) meeting ASTM C1107 standard and having minimum compressive strength 60 N/sqmm after 28 days as per ASTM C109, for repair to column, beam, slab, etc, complete all as per manufacturer’s instructions and as directed. Note : Formwork shall be measured and paid for separately. Note for item No.118 to 123: The work shall be got executed through the authorised applicator of the manufacturer as approved by GE.
E&M Items: Taking, down carefully copper/ aluminium point wiring (Light, Fan, socket or power) complete fittings such as switches, celling roses, pendants, regulators, sockets, DB's and dispose the same under sch of credit etc complete.
M&L for point wiring with 1100 V, 1.5 Sqmm single core PVC insulated unsheathed cable, copper conductor multistranded passing through including heavy duty PVC casing, capping, double lock type, min 25 mm wide including sheet metal box, terminal plates suitable for modular switch, socket etc. with all accessories, concealed MS box / PVC modular box with cover and 1.5 sqmm earth copper cable, for one light point, bell point, fan point controlled by one switch including cutting and making good surface of walls applying suitable painting as required all as directed.
S&F Modular switch 1 way 6 Amps,1 module complete all as direced by Engr-in-Charge.
S&F step type eletronic fan regulator modular type 120 W, 2 module complete.
S&F Ceiling rose surface bakelite White/ Ivory/ Urea finish 50 mm dia three terminals including supply and fix PVC square mounting block complete all as specified and directed.
Taking down existing light fittings fixed in any description and S&F new 24W LED 4' Glaze LED Batten high quality design aluminium extruded with decorative end caps light fitting and fixed as per manufacturer's instruction and making necessary electrical connections and testing on completion complete all as specified and as directed. Make: Jaguar Cat No. LGLZ01X024XC 24W or equivelant in Wipro/ Havells/ Bajaj
Taking down 1x4 ft LED Panel type light fittings of any type/ make, fixed on any description, after necessary electrical disconnection & re-fixing the same in existing/ different location as ordered after minor repair work i.e. loose connection and terminal fix etc is carried out in all respects & making necessary electrical connections & testing on completion complete all as directed.
S&F new BEE 3 Star rating ceiling fan 1200mm sweep, complete down rod and 3 core, 1.5 Sqmm copper conductor cable from ceiling rose to fan with all accessories and suitable size for down rod 230 V including taking down existing old ceiling fan complete all as specified and as directed. Note: Old ceiling fan shall be deposited in the AGE E/M store yard.
Taking down and refixing the existing ceiling fan of any make or size after minor repair work i.e. loose connection and terminals fix etc ceiling fan complete with down rod and connect 3 core 1.5 sqmm copper conductor cable from ceiling rose to fan with all accessories complete all as directed by Engr-in-Charge.
M&L for fan hook (D-hook hanger) heavy duty with M10 X 75mm fastener fix in existing ceiling as per direction and site requirement.
S&F single pole sheet metal enclosure with a two pin and earth plug and socket complete 240V with one single pole MCB 20 amp all as specified and directed by Engr-in-Charge.
S&F in repairs sheet metal enclouser for DB's double door (Vertical DB) in wall/ nitch when MCB's to be used Triple pole and neutral, 4 way, 415 Volt with 200 Amps rated Bus bar complete all as specified and directed.
S&F in repairs sheet metal enclouser for DB'S in wall / Nitch when MCB's to be used Single pole and neutral, 8 way, Double door 240 Volt with 200 Amps rated Bus bar complete all as specified and directed.
S&F in repairs MCB TPN 63 Amp, 240 V, 50 Hz, AC supply. Make: Legrand Cat No. 4086 83 or equivalent of Havells / L&T / ABB
S&F in repairs MCB SPN 63 Amp 240 V 50 Hz AC supply, 10 kA. Make: Legrand Cat No. 4086 20 or equivalent of Havells / L&T / ABB
S&F in repairs MCB SP 6 to 32 amp, 50 Hz, AC supply, 10 kA. Make: Legrand Cat No. 4085 92 to 4085 95 / Havells / L&T / ABB
M&L for submain wiring with two runs of single core 4 Sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawing in and including PVC casing caping of suitable size complete including provision of 4 Sq mm copper unsheathed cable PVC insulated as earthwire connected to earth doll inclusive of all tees, bends, elbows, reducers etc all as specified and directed. Note: 3 runs of 4 sqmm cable and one run of PVC casing caping shall be measured as one unit length.
Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable.
M&L for earthing complete with galvanized steel earth plate as electrode 600x600x6 mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected using galvanized iron earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI earth lead wire protected by Gl light grade pipe 15 mm bore, including provision of concrete pit of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) with 40 mm thick cover of RCC 1:2:4 reinforced with 8 mm dia TMT bars reinforced at 100 mm C/C both ways and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 2 m long placed on top edge of earth plate, char coal and common salt filling test point made out of 40x8 mm flange with fixing arrangement, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical Plate No. 3 of SSR Part I and connected to earth test point including taking down existing earthing complete all as specified including testing on completion.
S&F 3 star or above rated inverter type Split Air conditioning unit working on Gas R-32 (Refrigerant) of capacity 2 Ton consisting outdoor unit with fan motor, hermetically sealed rotary compressor with accessories and condensing unit of copper tubing complete duly connected with separately errected indoor unit with blower motor, plasma insulated copper tubing upto 5 to 6 mts suitable for 2 TR, including MS Stand duly powder coated painted, Gas charging internal copper wiring, remote control including making opening in stone/ brick wall by cutting, drilling for placing ducts, pipes etc and making good the distured surface of wall as per its original specifiaction including mounting brackets for wall/ stand to rest on slab etc AC installed as per manufacturers instructions and testing on completion to entire satisfaction of Engineer-in-charge complete all as directed. Make: Blue star/ Voltas/ Panasonic/ Mitsubishi/ Daikin/ Carrier/ Whirlpool
Taking up old rusted/ worn out GI tubing 15mm bore & connection and Supply and laying in trenches new 15 mm bore GI tubing medium grade (ISI Marked) including necessary fittings (ISI Marked) such as bend, tee, elbow etc complete all as directed.
Taking up old rusted/ worn out GI tubing 25mm bore & connection and Supply and laying in trenches new 25 mm bore GI tubing medium grade (ISI Marked) including necessary fittings (ISI Marked) such as bend, tee, elbow etc complete all as directed.
All as per item No. 145 here in above but for 40 mm bore
S&F in repairs 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed.
S&F in repairs 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed.
S&F in repairs 40mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed.
S&F in repairs PVC foot valve 40mm bore (ISI Marked) with jointing material complete all as directed.
Cutting of existing road/ hard standing for removing/laying of Pipe line, depth of cutting not exceeding 60 cm and width 45 cm and filling the trench of road i.e excluding top 15cms with existing aggregate obtained from cutting, watered and properly rammed to satisfaction of EIC and finally provide 150mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate to entire width of trench & finally match the top surface to road & disposal of debris to a distance not exceeding 50 Mts and depositing where directed complete all as directed. (Note : Quoted rate is deemed to be inclusive of 150mm thick PCC 1:3:6, cutting any type of road /foot path and removal of debris)
JAMNAGAR ELECTRIC AND MACHINERY CO
S t modi
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .