Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1 party₹16.3 LAccepted-AOC | L1 party | Accepted-AOC L1 PARTY | |
| 2 | L2 Party₹16.6 L+₹17,929 (1.09%)Rejected-AOC | L2 Party | Rejected-AOC L2 PARTY | |
| 3 | L3 party₹18.5 L+₹2.1 L (12.6%)Rejected-AOC | L3 party | Rejected-AOC L3 PARTY |
Tender Value
₹14.0 L
EMD Value
₹35,020
Closing Date
31 Jul 2024, 3:00 pmClosed
HOU(TP)
KMML, CHAVARA
Demolishing brick work, CC.Earth work.Shoring and soling.Shuttering work and steel work for RCC.RCC and PCC work.Brick masonry with common burnt clay brick, plastering.Vitrified,Anti skid tiling.Roofing with GI sections and PVC sheet.RR work
2024_KMML_680202_1
EAF/CIV/0700/2024-2025, Dtd 04/07/2024
Open Tender
Civil Works - Buildings
Item Rate
180 days
KMML, CHAVARA
Refer Tender Documents
6 documents required · 6 mandatory
₹2,950
₹35,020
22 Oct 2024
16 Jul 2024
1 Aug 2024
16 Jul 2024
31 Jul 2024
16 Jul 2024
Amount
Demolition of wall
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
Plain Cement Concrete Demolition
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)
RCC Demolition
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
Soling
Soling with rough stone of size 200 mm, well packed and filling voids with stone chips and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete.
Dismantling tile work
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
Earth work excavation
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
Providing and laying in position cement concrete of specified grade including provision for contraction/expansion, construction & longitudinal joints excluding the cost of centering and shuttering - All work up to plinth level: Cement shall be supplied by KMML.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
RCC up to plinth level
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size. Cement shall be supplied by KMML
Centering and Shuttering
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
Reinforcement steel work
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete .Thermo - Mechanically Treated bars of grade Fe-500D or more (TMT steel bars shall be supplied by company)
Available Earth filling
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
Centering Shuttering for Column
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
RCC for Column
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. Required cement shall be supplied by KMML 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Roof Beam Shuttering
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
Roof Slab Shuttering
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
RCC Roof beam and Slab
Reinforced cement concrete work in beams, slabs, suspended floors, roofs, having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).Cement and TMT bars supplied by KMML
Making the opening in brick masonry
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba / rubbish to the nearest municipal dumping ground.For door / window / clerestory window
Brick work
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including cost and conveyance of materials, steel tubular double scaffolding etc.complete.Cement mortar 1:6 (1 cement : 6 coarse sand) excluding cost of cement.
Plastering
Plastering with 12 mm cement plaster of mix:<br>1:4 ( 1 cement : 4 fine sand)(The required cement shall be supplied by KMML at our store)
Shoring
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered).Depth not exceeding 1.5m
Hacking
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
Vitrified tile
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) required Cement shall be supplied by KMML, including grouting the joints with epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1200x600 mm
Vitrified tiles in skirting
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours; shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) and finishing complete as per direction of Engineer-in-charge. Cement shall be supplied by KMML Size of Tile 1200x600 mm
GI steel Work
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved epoxy primer and 2 or more coats of epoxy paint, including welding and bolted with special shaped washers etc. complete
Roofing Work
Fixing FRP/poly carbonate/PVC /metallic sheets upto any pitch in horizontal /vertical / curved surfaces and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or sheets shall be fixed using self drilling / self tapping screw of size (5.5X55mm) with EPDM seal complete , but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. etc. complete (excluding cost of sheet, purlins, rafters and trusses.The required sheet and fixtures shall be supplied by the company), including shifting, lifting,cutting sheets to size and shape wherever required,all tools,tackles, labours, scaffolding etc.For level upto 10m from GL
RR masonry
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand). Cement shall be supplied by KMML.
Anti skid tiles
Providing and laying anti skid vitrified floor tiles in different sizes 300X300 mm or nearest available sizes having thickness 8mm with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.(Required cement shall be supplied by KMML)
Dewatering
Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
Red earth filling
Supplying & filling with red earth, spreading in layers, leveling the top at site and consolidation by plate compactor, ramming etc complete as per the instruction of Engineer in charge. Measurement will be taken for the compacted volume only.
P V CONSTRUCTIONS
KMML LAPA CONSTRUCTIONS AND LABOUR CONTRACT CO-OPERATIVE SOCIETY
Bidder Name
KMML LAPA CONSTRUCTIONS AND LABOUR CONTRACT CO-OPERATIVE SOCIETY
PRAJITH. P
P V CONSTRUCTIONS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .