ADDITION ALTERATION OF OFFICERS MD ACCN OF NEW RACE COURSE AT ACCS AHEMDNAGAR.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed .

Demolition of cement concrete (unreinforced) in ground floors and pavings of any thickness below or above ground level all as specified and directed.

M&L Special treatment to sunken portion of WC/Bath/Toilet/Kitchen etc. of area not exceeding 1.50 Sqm by providing 10 mm thick plaster in CM 1:4 mixed with WPC liquid Conplast x 421 IC of FOSROC or equivalent and applying one coat of Nittoproof 120 of FOSROC or equivalent 120 on entire newly plastered surface and rendering again 10mm thick in CM 1:4 mixed with complast - 421; filling the sunken floor with PCC 1:5:10 using brick bat including providing 40 mm nominal bore 0.60 m UPVC pipe etc complete all as specified and directed. Note: Work shall be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 all as specified and directed.

S&F Double charged Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles; complete all as specified and directed.

S&F Double charged Vitrified ceramic tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, provided on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles; complete all as specified and directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm laid in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles; complete all as specified and directed.

M&L Glazed ceramic coloured tiles as in vertical surfaces like skirting and dado etc. and of size 350 x 250 mm or 450 x 350 mm and 7mm thick; set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles; complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:4 on fair face of brick walls/ concrete surfaces as in backing coat for providing finishes; complete all as specified and directed.

Excavation over areas not exceeding 1.5 M deep and getting out in Hard/ Dense Soil complete all as specified and directed.

M&L Moorum/Red bajari filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread levelled watered and rammed and consolidated with power roller complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface; complete all as specified and directed.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection and flooring/ hard standing; finishing the surface even and smooth; complete all as specified and directed.

S&F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia (annealed); complete all as specified and directed.

M&L RCC (1:2:4) type B1 using 20mm graded stone aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies , deck slabs and in shelves and the like; complete all as specified and directed.

Taking down cement plaster on brick or stone wall/ceiling/chajjas etc including raking out joints hacking for key ,scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 10mm thick in CM 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:4 over brick or concrete surfaces finished even and smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement (WPC shall be measured and paid separately); all as specified and directed.

M&L Rendering 5 mm thick in CM 1:3 over brick or concrete surfaces or on chajjas finished even and smooth without using extra cement; all as specified and directed.

Supply only approved integral water proofing compound.

M&L Preparation of newly plastered surfaces of walls and applying two coats of acrylic emulsion distemper over one coat of primer over 1.50 mm thick wall care putty in two coats (Total thickness in two coats shall not be less than 1.5mm) ; complete all as specified and as directed. Note: Preparation of surfaces and application of paint shall be done all as described in PS clause 8.4 of tender documents.

M&L Preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade in new work using Two coats of paint applied @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm all as specified and as directed. Note: Preparation of surfaces and application of paint shall be done all as described in PS clause 8.4 of tender documents.

M&L Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade in new work using Two coats of paint applied @ 1.65 litre/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm all as specified and as directed. Note: Preparation of surfaces and application of paint shall be done all as described in PS clause 8.4 of tender documents.

M&L Preparing of old decorated plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed.

M&L Complete removal of existing treatment and preparation of surfaces including filling the cracks if any on surfaces of ceiling and applying two coat of acrylic emulsion distemper over a coat of primer complete all as specified and as directed. Note: Preparation of surfaces and application of paint shall be done all as described in PS clause 8.4 of tender documents.

M&L Complete removal of existing treatment and preparation of surfaces including filling the cracks if any on surfaces of walls and applying two coats of acrylic emulsion distemper over a coat of primer , over 1.50 mm thick wall care putty in two coats (Total thickness in two coats shall not be less than 1.5mm) ; complete all as specified and as directed. Note: Preparation of surfaces and application of paint shall be done all as described in PS clause 8.4 of tender documents.

M&L Preparing old surface wall surfaces and applying two coat of white wash complete all as specified and directed

S&F Grating doom 100mm dia of PTMT (Minimum weight 25 gms) all as specified and directed.

S&F 32 mm dia polyethylene pipe (LDPE) of low density of pressure rating 6kgf /cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm including taking down old one all as specified and directed.

Taking down of chowkat with shutters without taking off shutters from the frame ,exceeding 1.50 Sqm but not exceeding 2.0 Sqm each all as specified and as directed.

Taking down of chowkat with shutters without taking off shutters from the frame not exceeding 1.50 Sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

M&L Refixing shutters of any description exceeding 1.0 sqm each and not exceeding 2.0 sqm each all as specified and as directed.

S&F18/19mm thick Block boards, grade 2 quality interior grade commercial type fixed with screws to timber frame work; all as specified and directed.

S&F Second class hard wood plain solid, straight ,chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F Pressed steel frames for doors with one or more rebates of size 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed; complete all as directed.

S&F 30 mm thick flush door shutter; solid core construction with block board core and plywood face panels; commercial type on both sides; complete all as specified and directed.

S&F 25 mm thick Flush shutters for loft, solid core instruction, with block board core and plywood face panels, commercial type on both sides including taking down old existing shutters of any type; complete all as specified and directed.

S&F Second class hardwood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass gauge etc with sash bar divided into squares; edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc. sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.20 (a) and fitted to chowkats; complete all as specified and directed.

Dismantling of particle board, any thickness including cover fillets; complete all as specified and directed.

M&L 25 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

M&L 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive on wooden surfaces as per manufacturers instruction; complete all as specified and directed.

M&L 6 mm thick cover fillets of standard hard board 40mm wide and fixing with screws; complete all as specified and directed.

S&F 300 mm long, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete including dismantling / taking down existing all as specified and as directed.

S&F Butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.

S&F Butt hinges, medium weight ,cold rolled mild steel 75mm long all as specified and as directed.

S&F Aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue anodized with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F Aluminium anodized barrel tower bolt of extruded section 200 mm long and fixed all as specified and directed.

S&F Aluminium anodized barrel tower bolt of extruded section 200 mm long and fixed all as specified and directed.

S&F Extruded aluminium alloy handle fabricated type anodized 150 mm long complete all as specified and directed.

S&F Extruded aluminium alloy handle fabricated type anodised 100 mm long complete all as specified and directed.

S&F Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw 125 mm long all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F Mild steel framed works such as grills, gratings, gates etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165; complete all as specified and directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as directed.

S&F 30 mm thick Glass Fiber Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as directed.

M&L Aluminium powder coated frame for windows with one or more rebates including joining cleat for fixing etc. including aluminium framed window shutters any pattern, fixed/side hung/sliding ( three track) using powder coated aluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, handles 2 Nos in each door, powder coated aluminium fittings such as peg stays 150 mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), screws etc. suitable for 4mm thick glazing all as specified and directed. Notes: 1. Minimum thickness of powder coating shall be 50 micron. 2. Glazing shall be measured and paid separately.

M&L Aluminium powder coated frame for ventilators with one or more rebates including joining cleat for fixing etc. including aluminium powder coated aluminium ventilator shutters, top hung type, without sash bars, aluminium section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified for ventilator fixed complete all as specified and directed.

S&F 4 mm thick figured glass pin head type and glazing with oil putty or fixed with rubber beading in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 4mm thick tinted sheet glass ordinary quality and glazing with oil putty or fixed with rubber beading in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 4mm thick sheet tinted glass ordinary quality and glazing with oil putty or fixed with rubber beading in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed.

S & F in repairs Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and directed.

M&L Preparation of new surfaces of steel and iron works of any description not specifically mentioned otherwise over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L Preparation of old painted surface of steel and iron works of any description not specifically mentioned otherwise mentioned otherwise over 10 cm in width or girth and applying two coat of synthetic enamel paint all as specified and directed. .

M&L Preparation of new surfaces of wood or wood based material of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L Preparation of old painted surface of wood or wood based material of any description not specifically mentioned otherwise over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors ,aprons etc; complete all as specified and directed.

M&L 18 to 20 mm thick granite dark shade (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window-cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement mixed with marble dust in (1:2) proportion mixed with admixture of pigment to match with shade of granite; complete all as specified and directed.

Demolition or brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles; complete all as specified and directed.

M&L Brickwork using fly ash bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:4; complete all as specified and directed.

M&L Brick work using fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar1:4 all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 over fair faces of brick or concrete wall; surfaces finished even and smooth without using extra cement all as specified and as directed.

Dismantling of stone slabs in roofs suspended floors, chajjas, landings etc any thickness, set , jointed and pointed in any type of mortar; complete all as specified and directed.

M&L Machine cut kota stone in one piece laid as in treads of staircase, 20-25 mm thick over and laid over and including cement mortar screed bed 20 mm thick in cement mortar 1:6; jointed and pointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing and making 2 nos of 3 mm thick grooves on edge of treads of staircase etc as specified and directed.

M&L Machine cut kota stone slab 20-25 mm thick in one piece as in riser of steps, skirting, dado and pillars etc; laid on backing coat of plaster 10 mm thick in cement mortar 1:4; jointed and pointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing; as specified and directed.

M&L Machine cut cudappah stone 20-25 mm thick laid over and including cement mortar 1:6, 15mm thick; screed bed; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc. all as specified and directed.

S&F in repair; Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X460mm, bowl size 410mm x 355mm x 175mm (or nearest size) of make as per Appendix 'C' ; complete all as specified and directed.

S&F 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap; complete all as specified and directed.

M&L fixing in repair; PVC (SWR) multi floor trap of 75mm outlet with grating including jointing with solvent cement; complete all as specified and directed.

S F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement; complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Vent Cowl; complete all as specified and directed.

S&F in 75mm bore pipe traps "P" or "S" ; complete all as specified and directed.

S&F in 100mm bore pipe traps "P" or "S"; complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement; complete all as specified and directed.

S&F 75mm PVC (SWR) bend any radius; complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber fing joints fixed to walls; complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints in trenches or in floors; complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches; complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls; complete all as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece double (Double `Y') equal or unequal with access door; complete all as specified and directed.

S&F in repairs; 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F Toilet paper holder (TPH) of fixed to walls with chromium plated (CP) brass screws; complete all as specified and directed. Make: Jaquar model code ACN-1151N or techno commercially equivalent in makes as per Appendix 'C'.

S & F in repairs; Vitreous China Wash hand basin, white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand; complete all as specified and directed.

S&F in repair; Chromium plated Shower roses 125 mm dia size with or without swivel joints and size including fixing to steel pipe or union, complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long; complete all as specified and directed.

S&F CP soap dish holder including fixed to plugs with chromium plated brass screws; complete all as specified and directed.

S&F in repairs; Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions; complete all as specified and directed.

S&F Wall Mixer 3 In 1 with flange provision for Overhead Shower with 115mm long bend pipe on upper Side, connecting legs & wall flanges complete all as specified and directed. Make: Jaquar model code CON-281KN or techno commercially equivalent in makes as per Appendix 'C'.

S&F in repairs; PVC mirror cabinet of size 350 x 450 mm on walls at existing location all as specified and as directed.

S&F Brass chromium plated tumbler holder of make Jaquar CODE: AKP-35741P all as directed by GE/Engg-in-Charge Make: Jaquar model code AKP-35741P or equivalent in Cera/Crabtree/Kohler..

S & F in repairs; 10 litres PVC valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets; complete all as specified and directed.

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed; complete all as specified and directed..

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with P or S trap including plastic water closet seat, black, closed pattern with flat bottom, and cover with brass screws and mild steel chromium plated or aluminised hinging device; connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.; complete as specified and directed.

S/F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor etc. complete all as specified and directed.

S&F Two way bib cock with wall flange quarter turn (Low-flow) 15 mm dia with crutch or butterfly handles screwed down and screwed for iron pipe complete all as specified and directed. Make : Jaquar code No OPL-15041 or techno commercially equivalent in makes as per Appendix 'C'.

S&F Hand shower (Health faucet) with 1.20 meter long easy SS chrome plated hose flex tube in chrome finish and wall hook with NRV (Back flow preventer) complete all as specified and directed. Make : Jaquar code No ALD-577 or techno commercially equivalent in Cera/Marc/Player/Kohler.

S&F Towel rail 60 cm long with lower hangers of CP with and including chromium plated brass screws and wooden /plastic cleats; complete all as specified and directed. Make : Jaquar code No AQN-7711B or techno commercially equivalent in Cera/Marc/Player/Kohler.

S&F Perforated Thali basket of size 510 x 435 x 200 mm (or nearest size ± 5 mm); fabricated purpose made with stainless steel of grade 340, not less than 6 to 7 Kg each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of Telescopic channels, including fixing with steel screws, complete all as specified and directed.

S&F SS Cup & saucer basket of size 510 x 435 x 100 mm (or nearest size ± 5 mm); fabricated purpose made with stainless steel of grade 340, not less than 5 to 6 Kg each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of Telescopic channels, including fixing with steel screws, complete all as specified and directed.

S&F Plain basket 510 x 435 x 100 mm size (or nearest size ± 5 mm); fabricated purpose made with stainless steel of grade 340, not less than 5 to 6 Kg each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of Telescopic channels, including fixing with steel screws, complete all as specified and directed.

S&F Plain basket 510 x 435 x 200 mm size (or nearest size ± 5 mm); fabricated purpose made with stainless steel of grade 340, not less than 5 to 6 Kg each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, complete all as specified and directed.

S&F Perforated cutlery basket of size 510 x 435 x 100 mm (or nearest size ± 5 mm); fabricated purpose made with stainless steel of grade 340, not less than 6 to 8 Kg each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of Telescopic channels, including fixing with steel screws, complete all as specified and directed.

Notes for item Nos 113 to 117 :- (i) Telescopic channels shall be measured and paid separately under respective item. (ii) Model of reputed make as per recommendations of Modular Kitchen manufacturers shall be approved by GE.

S&F Dustbin holder 230 x 300 mm size (or nearest size ± 5 mm); fabricated purpose made using 5 mm thick wire of stainless steel of grade 340 including fixing with steel screws, complete all as specified and directed.

S&F Telescopic channels soft closing 500 mm long, mild steel powder coated with ball bearings, suitable for sliding SS plate racks 60 cm long standard width, fixed over 2nd class HW rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillet fixed on cudappah stone with screws, all as specified and directed.

S&F Soft closing hinges of approved design and shape made out of stainless steel of grade SS 340; ISI marked, fixed with SS nut screws & washers complete all as specified and directed.

S&F 18 mm thick marine plywood as per IS 710 laminated of any colour with high glossy acrylic sheet of 3mm thick grade I of frame and shutter for kitchen cabinets complete all specified and directed .

S&F 600 mm care case made with MDF board and doors with Marine plywood with both side lamination, one side white and other side specified colour with edge binding; complete all as specified and directed.

S&F Aluminium 'G' section handles, fabricated type, anodized 150 mm long of approved design, shape and make with nut screws & washers complete all as specified and directed.

S&F 20 Gauge MS steel hollow section welded frame with powder coated (white colour) of various section for base frame all as specified and directed.

S&F Plain asbestos Cement sheet 12mm thick for loose (panel) all as specified and directed.

S&F Plywood 18mm thick with lamination (white colour ) on both side as in heavy drawers of capacity 35 kg (Innotek drawer) as specified and directed.

S&F 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions and fixed all as specified and directed.

S&F 25 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions and fixed all as specified and directed.

S&F 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule all as specified and directed.

S&F 25 mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule all as specified and directed.

M&L Site clearance of roof surfaces of buildings upto G+2 height including cleaning away all grass, vegetation, saplings, shrubs, brush wood, under growth, roots and trees not exceeding 30 cm girth (measured 1m above roof level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance and applying antiweed chemical in concrete surface and making good the depression etc. including necessary scaffolding etc. required; all as specified and directed .

M&L Repairs to edges of chajja by removing the old loose concrete material, cleaning the reinforcement and fishing the surfaces by apply epoxy base resin of approved make and making good with cement concrete 1:1.5:3 as required to exiting broken surfaces and again applying epoxy coating as per manufacturer's recommendations; finished fair and even in 5 mm thick plaster in cement mortar 1:3 and applying two coats of weather proof emulsion paint upto 600 mm depth and 100 mm thickness as required at site upto G+2 building all as specified and directed

Taking up/down steel tubing 15 mm bore and connection including cleaning/removal to store complete all as specified and directed.

Taking up/down steel tubing 20 mm bore and connection including cleaning/removal to store complete all as specified and directed.

Taking up/down steel tubing 25 mm bore and connection including cleaning/removal to store complete all as specified and directed.

S&F GI water tubes of bore 15 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F GI water tubes of bore 20 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F GI water tubes of bore 25 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness made out of M-40 Grade concrete; laid over and including 50 mm thick cushioning of crush sand/ stone dust all as directed.

M&L Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face; complete all as specified and directed.

M&L GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste; complete all as specified and directed.

M&L Cutting of existing cracks on wall up to 10 mm deep and n exc 10 mm wide face and clean the groove properly and fill crack with filler materials with gunitting machine up to last edge of crack till it reaches the surface of wall and M&L applying tow coat of wall care putty and two coat of oil bound distemper to match the existing finish; complete all as specified and directed.

Taking down carefully existing unserviceable bitumen felt (any number of layers) including plaster beneath of any thickness, wire brushing and cleaning of the surface of roof & terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed

Demolition of plain cement concrete (unreinforced) in ground floor /plinth protection etc.; including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjas top/junctions etc complete all as specified and directed.

Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed.

M&L Rendering screed bed 10 mm thick in CM (1:4) on roof slab top mixed with water proofing liquid as per manufacturer's instructions; finished even and fair without using extra cement complete all as specified

M&L Applying water proofing treatment on roof surfaces as under :- (i) Applying one coat of bituminous primer @ 0.25 kg/Sq. M (ii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures. (iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm over membrane over non accessible roof surfaces complete all as per manufactures instructions and as directed.

Disconnecting existing PVC water tanks of capacity exc 500 litres & n. exc 1000 litres setting aside (or lowering) for repair work and hoisting, reconnecting, refixing in the same position complete all as specified and as directed.

Taking up or down & refixing the steel tubing 20mm bore obtained from item No 148 above after cleaning in new or old position (wall, ceiling, floor etc.) complete all as specified and as directed .

M&L 75 mm thick cement concrete 1:3:6 type C-1 (20mm graded aggregate) as in sub base for interlocking paver blocks; complete as specified and directed.

M&L Providing and laying at or ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including jointing with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm including making drainage opening wherever required complete as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/bell/socket, power point etc) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

M&L Modular point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and including PVC Casing and capping ISI Marked with its accessories PVC boxes including Modular white plates with frame for fixing switches/socket/regulators etc including 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Notes: 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by one switch with cables 1.5 sq. mm size

One fan point controlled by one switch with cables 1.5 sq. mm size

One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size

One light point controlled by two , 2 way switches , with cable 1.5 Sqmm

One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size

One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size

Ditto - all as per item No 153.00 above but with using 2.5 sqmm size cable for one 3 pin socket 15 Amp on independent board.

S&F Modular switch 1 way 6A, 1 module

S&F Modular switch 2 way 6A, 1 module

S&F Modular switch 1 way 16A, 1 module

S&F Socket, 6A - 3 pin combined 2 module

S&F Socket 6A/16A - 2/3 pin combined 2 module

S&F Modular Bell push 6A 1 module

S&F Bell Multi Music type

S&F Fan step regulator, 120W - 2 module

S&F Lamp holder (Angular/Straight ), insulated body, with back plate suitable for batten fitting complete all as specified & directed.

M&L Ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as specified and directed.

Taking down carefully MCBs DBs etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

S&F Double door Sheet metal enclosures vertical type, factory made DBs 6 way, (VTPN DB's) 415 volts with provision of 63 Amps MCCB 25 KA protection class IP-43, suitable for fixing 4 pole RCCB/MCCBs, Isolators etc including prewired, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting; with 200 Amps rated copper Bus bar, with Neutral bar, earth bar and cable lies for Cable management, fully shrouded, neutral bars, prefitted masking sheet complete all as specified and as directed.

S&F Double door Sheet metal enclosures factory made DBs 4 way, (TPN DB's) 415 volts protection class IP-43, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting; with 200 Amps rated copper Bus bar, with Neutral bar, earth bar and cable lies for Cable management, fully shrouded, neutral bars, prefitted masking sheet complete all as specified and as directed.

S&F in replacement double door Sheet metal enclosures factory made DBs 04 way, (SPN DB's) 240 volts protection class IP-43, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting; with 100 Amps rated copper Bus bar, with Neutral bar, earth bar and cable lies for Cable management, fully shrouded, neutral bars, prefitted masking sheet complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps for AC connection complete all as specified and as directed.

S&F MCB , SP, AC, 240 volts of 06 to 40 Amps, 10 KA Capacity, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCBs , TPN, AC, 415 volts of 40 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCBs, TP, AC, 415 volts of 63 Amps, 16 KA Capacity, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB, SPN, AC, 240 volts of 40 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed.

S&F decorative slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core sheathed copper conductor cable of size 0.5 Sqmm complete with all accessories all as specified & directed.

S&F LED light fitting 1 x10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with all accessories all as specified & directed.

S&F Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish , suitable for 9 W retrofit LED (B-22 base) with and including lamp holders, connector block and retrofit type LED lamp 1 x 9 W (including suitable LED Lamp 9 W), complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable all as specified & directed.

S&F Lumeno LED Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for "B-22 type to fix on batten holder and wall light etc complete all as specified and directed.

S&F in replacement, Superb LED street light fitting 25 Watt waterproof IP 65, dust and waterproof LED luminaire with polycarbonate Housing suitable for (Bldg security light) fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ, complete all as specified and as directed

S&F Sub main wiring with two single core PVC insulated, unsheathed, FRLSH stranded copper conductor cable 4 Sqmm for phases and neutral with one run of 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories, connected to common earth dolly etc complete all as specified and directed. Notes: 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two runs of 4 Sqmm cable (i.e. for one run for phase, one run for neutral) with one run of 4 Sqmm cable for earth and one run of PVC Casing & capping shall be measured as one unit only.

S&F Sub main wiring three phase with 6 Sqmm single core, 4 runs of PVC insulated, unsheathed, FRLSH stranded copper conductor cable for phases and neutral with one run of 6 Sqmm, PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories, connected to common earth dolly etc complete all as specified and directed. Notes: 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Four runs of 6 sq.mm cable (i.e. for three run for phase, one run for neutral) with one run of 6 Sqmm cable for earth and one run of PVC Casing & capping shall be measured as one unit only.

S&F Sub main wiring with two single core PVC insulated, unsheathed, FRLSH stranded copper conductor cable 1.5 Sqmm for phases and neutral with one run of 1.5 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories, connected to common earth dolly etc complete all as specified and directed. Notes: 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two runs of 1.5 Sqmm cable (i.e. for one run for phase, one run for neutral) with one run of 1.5 Sqmm cable for earth and one run of PVC Casing & capping shall be measured as one unit only.

M&L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground. Earth pit not less than 2.25mtr depth and top edge of the earth plate not less than 1.5 mtr below normal ground level; surrounded by salt and charcoal dust; connected to galvanised earth lead wire 4.0 Sqmm dia by means of nuts, bolts & washer etc.; earth wire connected upto main earth point/DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20 mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 (using 20 mm graded stone aggregate) and RCC pit cover 50 mm thick precast RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of MS bar @ 15 mm CIC with both way lifting arrangement complete all as specified in Electric plate No. 3 of SSR including all necessary excavation & earth work all as specified and directed .

Taking down old electric meters , removing materials & deposit to MES store for keeping in safe custody.

S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 200 mm; all as specified and directed.

Taking out/down carefully and opening of existing water Geysers of 25 Ltrs capacity, from any position, of any make etc & refixing after reassembling and after repair /replacement of spare parts/ material/items at the desired location and making necessary water inlet, outlet & electric connections to make it functional with including using material/parts of minor nature such as screws, insulation tape, nuts, bolts, washers, angle fasteners and clamp etc including cleaning and painting with spray painting to required gloss with white synthetic enamel paint on complete body & writing MES No with black synthetic enamel paint etc complete all as specified and directed.

S&F in replacement heating element 2.0 KW, ISI marked, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed.

S&F in replacement thermostat switch , pointer type with adjustable knob, suitable for 25/50 ltrs capacity vertical type geyser & etc complete all as specified and directed.

S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc; complete as specified and directed.

S&F Smart Prepaid energy meter three phase four wire dual source BIS 16444 marked in existing meter board / floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 415 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition; complete as specified and directed.

Taking out Existing Ceiling fan with Complete accessories and Servicing, greasing ,refixing at the same location all as specified and directed.

Taking out Existing Ceiling fan with Complete accessories and Deposit to E/M Store Yard all as specified and directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC); complete all as specified and directed.

Supply, install, test & commissioning electric chimney for domestic use of 60 cm 1200m^3/hr, filterless,auto clean chimney including all accessories, fixing chimney in modular kitchen all and provision of exhaust pipe to outside of the kitchen all as specified and directed. Note: Provn of electric power socket will be paid and measured separately.

KSP ENTERPRISES

VIRENDRA FABRICATORS

L.K.R.TIWARI CONSTRUCTION

N. H. Saluji & Associates

M/s S. R. Constructions