Stage Contract for Repair AND renovation of Yemberzal Guest House.

Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm

P/F Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing \in white cement mixed with pigment of matching shade complete. 1200mmx600mm

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) including carriage of all materials upto site of work complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

Providing and fixing of imported wooden panelling(12mm thick) lining on walls, ceilings tongued and grooved planks including cost of ground work ofjambs/runners of kd or budloo 2"x1.5" @600mm c/c horizontally and vertically in level and plums 12mm thick ply 50mm wide 600mm*600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete all complete

Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work

Providing and fixing of Wall panels of approved , carved/Grooved design in the shape of regular/iregular panels of desired shape and size. Panels to be made up of 18mm thick HDHMR boards ( BIS Certified) Incl. necessary frame work, fixtures, fittings and scafolding etc complete. The exposed surface shall be polished with PU polish/Deluxe Deco Paint of approved design . all complete

Providing and Fixing imported HDHMR Mouldings 18 mm & 25 mm thick and width of different sizes and patterns as required in patterns as directed incl. cost of nails,silicon complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2

P/fixing of cup boards 0f 18 mm thick water resistant/ termite proof board of approved quality & make in frames & shelves back with 6mm thick ply board including fixing decorative high pressure laminate in plan incl. fixing of limping to edge and necessary fitting complete job and applying a coat of wood primer and two coats of enamel synthetic paint over interior surface kitchen Almirah (cup Board) as per the directions of EIC at site complete.

Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Egagement of welder along with necessary equipment for re-fixing of the existing grill as per the directions of EIC at site complete.

Egagement of helper for required works as per the directions of EIC at site complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) including all carriages upto site of work complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing of PVC pipe (Type “B”) in proper gradient.

100mm Dia

75mm Dia

50 mm Dia

100mm Dia Plain Bend

100mm Dia Door Bend

100 mm Plain Tee

100mm Door Tee

100 mm Floor trap(Multi trap)

Floor Trap (75mm)

Reducer 100mm to 75mm

75mm Dia Plain Bend

Reducer TEE 100mm to 75mm

Plain Y 100 mm

Plain Y 75 mm

Half bend 100 mm

Half bend 75 mm

Collar (100 mm)

Collar (75mm)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing PPR Unions 25mm of standard quality

PPR Union 32mm

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing C.P. brass WALL mixer (Jaquar or Equivalent as Per Make List

P/F of following sanitary items i/c cost all necessary fittings complete of approved brand and quality as per the directions of EIC at site complete.

C.P Grating

Soap case

Angle valve

Towel rod

Mirror 3'x4'

Waste Coupling

Health faucet

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand), 200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), neatly finished complete as per standard design including excavation, refilling and disposal of surplus earth. incl. cost of C.I. manhole cover with frame.Size 450x450x450mm

Providing and fixing 7-litre capacity instant electric water geyser, ISI marked, wall mounted type, complete with all standard accessories, testing and commissioning complete, but excluding electrical wiring and switch socket, which shall be measured and paid separately

Supply, Installation, Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Shutter typed Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 B of Following Sizes including connection etc. Complete.