CA NO. CWE BLY /GE(W)/37 OF 2021-2022 SPECIAL REPAIRS TO BLDG NO P-174 (A TO D) AND P-175 (A TO D) AT PB MARG AND SPECIAL REPAIR/REPLACEMENT OF OHT IN CERTAIN BLDGS AT JLA UNDER GE (WEST) BAREILLY

Amount

Demolition of brick or stone/ boulder work in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with fly ash bricks, old size,straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and paving n exc 15 cm thickness in ground floor complete all as specfied and directed.(reinforcement cut as required to facilitate the demolition)

M&L for RCC 1:1.5:3 mix, type A-1, (Using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams, Chajja, columns in floors, roofs, landings, balconies, canopies, deck slabs, cooking platform and in the shelves and the like in portions/ patches complete all as specified and directed.

M&L for use& waste of form work to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete flat complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including raking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning etc complete as directed and specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick wall or concrete surfaces in CM 1:4, finished even and smooth without using extra cement but using liquid water proofing compound @ 200 ml per bag of cement complete all as specified and directed. Note :- Liquid waterproofing compound shall be measured & paid seperately as "Supply only"

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling of concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and pavings n. exc 15 cm thickness (below or above ground level) & clearing off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar including bedding layer complete all as specified and as directed.

M & L for 18 to 20 mm thick machine cut mirror polish kota stone slab as in skriting,risers and tread of steps,dado and pillars etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and mirror polishing with and including 15mm thick backing coat in CM 1:4 complete all as specified and directed. (Note: Kota Stone for riser & tread of steps shall be provided in single piece)

M&L for Virtified ceramic (Light shade) coloured tiles, 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.16 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Virified ceramic (Light shade) coloured tiles 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.16 Sqm but not exceeding 0.36 sqm, as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 (400x400 mm) Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L coloured glazed ceramic tiles of size 250mm x 375mm x 7 to 8 mm on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 on brick work or concrete surfaces complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 Sqm but n.exc 4.0 Sqm each and removing from site including making good disturbed portions of walls with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 Sqm each and removing from site including making good disturbed portions of walls with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down shutter of any description exc. 1.0 Sqm but n.exc 2.0 Sqm each and removing from site complete all as specified and directed.

S&F factory made PVC internal door frame (Prelam) of size 100mm x 45 mm with a wall thickness of 5mm (+-0.25mm) made out of extruded 5 mm (+-0.25mm) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90x30mm shall be made from plain colour PVC sheet of 5 mm (+-0.25mm) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and jointed with 4 Nos of 150 mm long brackets of 15 mm x15 mm MS square tube. The two tube vertical door frames are to be reinforced with 40mm x 20mm MS tubes of 19 guage throughout the frame. The door frame shall be fixed to the wall using 8/100mm long screw through the frame by using anchor fastners.A minimum of 4 Nos screw to be provided for each vertical members and minimum 2 Nos for horizontal member etc complete as per manufacturers specifications and complete all as specfied and directed.

S&F 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for stiles as well as top, bottom and lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section, 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/ prelam PVC sheet manufactured by an ISO 9001-2008 certified company on both side of the inside panel. All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet batten made by sticking 2 Nos PVC sheet of 5 mm (+-0.25mm) thickness using PVC solvent cement adhesive door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20mm thick (5mm x 4mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 Nos stainless steel but hinges of size 100mm x 25mm x 25mm and 50mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25mm x 8mm size steel screws etc complete as per manufactures specificatons and drawing complete all as specified & as directed.

M&L for Second class Hard Wood (Sal wood) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work etc complete conforming to Fe 290-0 grade-E-165 complete all as specified and directed.

S&F 35mm thick factory made flush door shutters, solid core constructions with block board core and plywood face panels, commercial type on both sides and fixed to chowkats with screws complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters in 2nd class hardwood,, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed.

S & F steel windows with pressed steel frame(size95x45x1.25mm) with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazed openable shutter with glazing bar(open out side) and wire gauged openable shutter without glazing bar(open inside), dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 Jan 2002 . NOTE :- (i) Two shutters ie wire gauged and glazed shall be fixed in one composite frame and both shutters shall be measured as one unit. (ii) Unit rate quoted shall include for filling of PCC (1:2:4), type B0 in hollow portion of the frame. (iii) MS grill shall be measured and paid separatly under relevant item of schedule

Ditto all as per item No 28 above but as in ventilators, bottom portion fixed type glazing, and top portion with top hung wire gauge shutter dovetailed or welded complete all as specified and directed& shown on Drg No- TD/088 dt 07 Jan 2002.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for 3mm thick figured glass, ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F mild steel butt hinges 100mm size, cold rolled, medium weight and fixed complete all as specified and directed.

S&F extruded aluminium butt hinges, 100mm sizewith galvanised mild steel hinge pin,anodised & fixed,type B-21 complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm extruded aluminium anodised handle, fabricated type complete all as specified and directed.

S&F 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair, mild steel 300mm long, ordinary rat tail rod pattern helcal springs including roller and roller plate complete all as specified and directed.

S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer including thin layer of wall care putty (not less than 3.00mm thick) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls & applying two coats of oil bound distemper over a coat of alkali resistant primer including thin layer of wall care putty (not less than 3.00mm thick) complete all as specified and directed .

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specfied and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over one coat of Chalk whiting primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specfied and direcetd.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and direcetd.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 mix, type C1, (using 20 mm graded stone aggregates) in floor/plinth protection, finished the top surfaces even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

S&F GI tubing of 25 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F GI tubing of 32 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F GI tubing of 40 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm bore Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20 mm bore Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25 mm bore Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 32 mm bore Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 40 mm bore Gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

Dismantling water tank of any type and of capacity exc 500 ltr but n exc 1000 ltrs complete all as specified and directed.

S&F 500 litre rotational moulded polyethlene water storage tank tripple layered white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. Make-Sintex-Sintex Pure/ Titus, Vectus- Vectus Smart/ Vectus safe, Supreme- Supreme White”

S&F 1000 litre rotational moulded polyethlene water storage tank tripple layered white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. Make-Sintex-Sintex Pure/ Titus, Vectus- Vectus Smart/ Vectus safe, Supreme- Supreme White”

S&F 3000 litre rotational moulded polyethlene water storage tank tripple layered white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of water tank complete all as specified and directed. Make-Sintex-Sintex Pure, Vectus- Vectus Smart/ Vectus safe, Supreme- Supreme White”

S&F 5000 litre rotational moulded polyethlene water storage tank tripple layered white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of water tank complete all as specified and directed. Make-Sintex-Sintex Pure, Vectus- Vectus Smart/ Vectus safe, Supreme- Supreme White”

S&F 25 mm dia ball valves, high pressure of PTMT(minimum weight not less than 455 gm) with epoxy coated alumunium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 40 mm dia ball valves, high pressure of PTMT(minimum weight not less than 690 gm) with epoxy coated alumunium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 20 mm dia ball valve, high pressure of PTMT with epoxy coated Alumunium rod and high density plastic ball, screwed for iron pipe (Wt not less than 210 gm) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) white, including connection to drain or out going pipe and flush pipe anti syphonage pipe complete all as specified and directed.

S&F in repair plastic water closet, white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F in repair vitreous china water closet Squating pattern (Orissa Pattern) of size 580mm x 440mm, white with integral foot rest including connection to trap,and to flushing pipe,anti-syphonage pipe and PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern,white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed .

S&F in repair 15 mm bore Stop valves/ angle valve/two way angle valve, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm dia bib taps , chromium plated, cast copper alloy with crutch or butterfly handle screwed down for iron pipe completed all as specified and directed.

S&F in repair 15mm bore, PVC connections of length 450mm with brass ferrules on both ends complete all as specified and directed.

S&F in repair 100 mm dia stainless steel grating fixed complete all as specified and directed.

S&F in repair brass chromium plated towel rail 20mm dia, D type, 600 mm long including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Hacking out old, broken glass (any thickness,) size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all specified and as directed.

S&F in repair 15 mm bore brass chrominum plated central hole basin mixture complete all as specified and directed.

S&F in repair 15 mm bore bib taps, fancy type, chromium plated with long body, (concealed type), cast copper alloy, wall flange, screwed down high pressure with capstan head complete all as specified and directed.

S&F in repair 100mm dia brass chromium plated shower rose for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed

S&F in repair 15 mm bore chromium plated wall mixer with connection for shower arrangment complete all as specified and directed.

S&F in repair Water jet for ETWC,brass chromium plated including necessary connections complete all as specified and directed.

S&F in repair hand shower (health faucet) 1 meter PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repair kitchen sinks with draining board made of stainless steel 1 mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair of PVC corner, Set of three of size (12" x 12", 9" x 9" and 6" x 6") with railing and conforming to the sample kept in GE office complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, Waste or rainwater drainage pipes, single socketed, in any length with rubber ring joints joint laid in floor or fixed on walls complete all as specified and directed.

S&F 110 mm bore,PVC (SWR),bends any radius complete all as specified and directed.

S&F in repair, Stainless steel plate rack of size 75 cm x 90 cm x 25 cm made out of 1 mm thick sheet with all integral fittings & conforming to the sample kept in GE office complete all as specified and directed.

M&L 16 to18mm thick granite stone slabs, mirror polished of colour and shade as approved by GE, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 25 mm thick, PCC 1:2:4 mix, type B-0, (using 12.50 mm graded stone aggregates) as on floor, finished even and rough to receive floor treatment above complete all as specified and directed.

Labour only for providing full rounding to edges of stone slabs as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair 20 mm dia, Stainless steel,fancy type, drapery curtain rod with bracket and all necessary fittings fitted on wooden round blocks with screws complete all as specified and directed.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs & preparation of surfaces for applying primer and bitumen complete all as specified and directed.

M&L for providing Plain Cement Concrete, 1:2:4 mix, type B-0, (using 12.50 mm graded stone aggregates), as in levelling course,top finished even an fair without using extra cement, on roof surface/ chajja (thickness of concrete shall be as directed as per site requirement) complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of concrete surfaces in CM 1:4 using liquid water proofing compound @ 200 ml per 50 kg of cement complete all as specified and directed. (Note:- WPC shall be measured and paid seperatly)

Material and labour for providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex mnufactured by M/s Bengal Bitumen,Multiplass Standard manufactured by M/s STP TEXAS,Hyperplass manufacturedby M/s IWL Ltd with 10 years guarantee for water tightness all as specified and directed and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/ Sqm over a coat of polymeric primer @ 0.30 Kg/ Sqm including cleaning surface complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/ Sqm Hyperplas Standard/ multiplass Standard counting of 100 micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10 cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified and directed.

M&L for applying two coats of aluminium priming coat over a APP membrane surface of any description not otherwise described over 10cm width or girth as specified and directed

M&L for providing Plain Cement Concrete, type B-1, 1:2:4 mix (using 12.50 mm graded stone aggregates) in benching, coping, bed blocks,roof kerbs etc including necessary form work, weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Dismantling of cast iron/ PVC /AC /SGSW pipes 100 mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F in repairs factory made PVC Cupboard frame of the size 75 mmx40mm with a wall thickness of 5 mm, made out of extruded 5 mm thick plain/prelam PVC sheet of density 600 Kg/Cum, having bottom width of 50 mm, thickness of 10 mm. All four frame lengths reinforced with 15 mm x15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 Nos of 15 mm long brackets of 10 mmx10 mm square tubes. The door frame shall be fixed to the wall using 8/100 long MS screws through the frame by using PVC fasterners. A minimum of 4 nos of screws to be provided for each vertical member and minium of 02 Nos of screws to be provided horizontal member etc.complete all as specified and directed.

S&F factory made PVC Cupboard flush type shutters of 30 mm thick consisting of frame made out MS tube of 19 gague thickness and size 19 mmx19 mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm thick plain/prelam PVC sheet, on both side of inside panel including necessary items to fix the shutter to frame such as 100 mm stailess steel hinges, 100 mm long handles of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet batton( made by sticking 2 Nos PVC foam sheet of 5 mm thickness using PVC solvent cement adhesive) complete all as specified and directed.

M&L for machine pressed, Precast concrete, rubber moulded, coloured, interlocking paver blocks, 60mm thick, M-35 grade any shape and any size conforming to IS 15658-2006, with grey cement and pigment of approved design and pattern including 100 mm thick PCC 1:4:8 mix, type D-2,( using 40mm graded stone aggregates) sub base and 25 mm thick sand cushioning of dry river sand complete all as specified and directed.

M & L for PVC boards 19/20mm thick of any colour fixed in cabinets/Shelves and shutters fixed with screws and adhesives as per manufacturers instructions complete all as specified and directed.

S&F in repair Vitreous china wash basin white, flat back, size 580x450 mm including waste coupling brass, waste pipe, chain plug and porcelain stopper, brackets and including cutting for and pinning in ends of brackets complete all as specified and directed.

E/M Part:- Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unserviceable main switch, DBs with MCBs any size and capacity including making good disturbed surface of wall complete all as specified and directed.

Taking down sub main wiring of any size & any runs/capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring in concealed PVC conduit using 1.5 Sq mm single core, PVC insulated, unsheathed copper conductor cable 1100 V grade multistranded drawn through conduit and including rigid PVC conduit 2mm dia and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS, duly painted with red oxide metal primer including fixing/ grouting sunken/ surface as per site requirement covered with 3 mm thick plastic laminated sheet including running up of 1.5 sq mm copper conductor, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etccomplete all as specified and directed for following point wirng :-

One light/ fan/ exhaust fan/ bell point conrolled by one one way switch 5A, SP

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the independent board

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

One bell/ buzzer point controlled by one push button on the same board with other switches or independent

All as per item No 113 above but for 15 Amps, 6 Pin, Switch Socket out let independent with 2.5 Sqmm FRLS (nominal area) cable, PVC insulated, but unsheathed, copper conductor, Single Core, multistranded complete all as specified and directed.

M&L for Sub main wiring with 2 runs of Single core 6 Sq mm (FRLS) PVC insulated, unsheathed,cable 1100V, multi stranded copper conductor drawn through and including adequate sizes PVC conduit, medium grade, concealed in wall for sub main connections with accessories and fittings and one run of 6 Sqmm (FRLS) Single core multi stranded copper conductor cable as earth continuity conductor. (Note:- Two runs of 6.0 Sq mm cable and one run of 6.0 Sq mm copper conductor in PVC conduit shall be measured as one unit length.)

S&F Sheet metal enclosure factory fabricated for multiphase out going suitable for mounting MCCB as incommer of rating 100 Amps, Vertical type distribution board, 4 Way,TPN with suitable Amp rated bus bar having IP 42 protection and double metal door, concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

S&F MCCB 100 Amps, 4 Pole, 10KA with thermal and magnetic setting including installation and making connections complete all as specified and directed.

S&F Switch, Piano, flush type, Polycarbonate, 5 Amps, Single Pole, One way complete all as specified and directed.

S&F Socket outlet, Polycarbonate, 2 in 1, 5 Amps, 5 Pin, multipurpose, flush type complete all as specified and directed.

S&F Switch Socket combination out let, 6 Pin, 2 in 1, 5/15 Amps, multipurpose, flush type, 240 volts complete all as specified and directed.

S&F bell push, flush type, 5 Amps complete all as specified and directed.

S&F bell ding dong, musical, AC, 230 volts, Single Pole complete all as specified and directed.

S&F Ceiling rose, PVC polycarbonate, isolated body, 3 terminals, AC, 230 volts complete all as specified and directed.

S&F in replacement electronic fan regulator, 150 Watts, flush, socket type with five steped range complete all as specified and directed.

S & F in replacement of Lamp Holder PVC/Polycarbonate, insulated body with back plate batten/ angle type for batten fittings complete all as specified and directed.

S&F MCB, 240V, 50 Hz, SPN, 63 Amps, 10 kA rupturing capacity complete all as specified and directed. Cat No :- CSMBS1B40/63 manufactured by M/s C & S or equivalent model manufactured by M/s Legrand/Schneider.

S&F MCB,240V, 50 Hz, single Pole, 6-32 Amps, B curve, 10kA rupturing capacity complete all as specified and directed. Cat No :- manufactured by M/s C & S or equivalent model manufactured by M/s Legrand/Schneider.

S&F flush type Sheet metal enclosure, SPN DB, 8 Way, with double door, IP-42 protection, detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed.

S&F in replacement LED mirror light fitting of T-5 batten, 1x20 Watt, with electronic ballast of suitable capacity, clear acrylic cover including mounting on wall complete all as specified and directed.

S&F indoor decorative LED light fitting suitable for 3 to 5 Watt LED lamp, bracket made out of brass with round base and brass holder & brass gallery with glass including LED lamp complete all as specified and directed.

S&F surface mounting, LED indoor, decorative ,PVC extruded, T-5 batten, 20 watt, 4 feet light fitting including connection with 23/0.0076, three core, PVC flexible cable complete all as specified and directed.

Taking down and refixing the serviceable ceiling/ exhaust fans including provision of new two Single core, twisted flexible wire of suitable size from ceiling rose to ceiling fan connector complete all as specified and directed.

Supply only LED lamp 12 Watt, 230 V, AC integrated circuit complete all as specified and directed.

S&F Porch light, surface type, LED ceiling tile type fittings, 18 Watts, with integrated electronic driver, dimensions 300 x 300 mm connected with three core 23/0.0076 rubber insulated copper cable from ceiling rose to connector, with hanging arrangement complete all as specified and directed.

Dismantling the electronic/ electric meter form wooden board and refixing the same with proper concealed connections on the same board including testing after completion for reading complete all as specified and directed.

S&F Bulk head light fitting, 1 x 10 W LED, attractive surface mounted type, with sheet steel housing with opal acrylic diffuser and decorative end plates, Plastic housing wire, suitable for mirror fittings, lamp holders, connector blocks including LED lamps 10 watts complete with all accessories including connection with twin core twisted flexible copper conductor cable of suitable size copper wire complete all as specified and directed.

S&F Security light fitting, LED type, 20 Watts, 6000K, Pressure die cast housing with prismatic polycarbonate diffuser & individual LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 32 mm dia,medium grade and 1.20 m long fixed to wall with and including nut, bolts and GI clamps made out of MS FI of size 50 x 6 mm as required including painting with two coats of synthetic enamel paint over a coat of red oxide primer and making connection with three core 23/0.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

Taking down existing geyser of any capacity and any description and repair/maintenance complete including replacement of unserviceable parts such as heating element,inner shell,glass wool,indication lamp & painting matching with the existing tint & re-fixing the same including provision of three core,2.5 Sqmm cable from socket to geyser complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 4,04,423.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

SHIV SAI ENTERPRISES

M/S Rajeev Sharma and Co.

Shikhar ji Enterprises