Track Works in Connection with the Sanctioned Works of (i) Junagadh - Relocation of MG Station from Existing place to Grofed Area and (ii) Delvada - Provision of Additional MG Loop line.

Item Breakup - A-USSOR 2021 Items

4110.00 clearing, grubbing, stripping top soil (average Sqm 150 mm) and stacking beyond foundation area, thereafter ploughing and pulverizing 150 - 200 mm of top of soil with tractor trolley, mixing water to achieve OMC with water sprinkler or left for natural drying, as required, and compaction with vibratory roller of suitable capacity to achieve 98% MDD for laying first layer of soil for embankment construction. Earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, platforms etc. with contractor's own earth conforming to Soil Quality Class SQ1/SQ2/SQ3, after preparation of foundations as applicable, benching in existing banks wherever required, spreading in layers with motor grader, bringing the moisture content to OMC, mechanical compaction to specified density and dressing of bank to final profile as per RDSO Specifications: RDSO/2020/GE: IRS-0004 with latest correction s l i p s . Note: 1) Foundation preparation, Benching including additional earthwork on account of this, wherever required, shall be paid extra under relevant schedule item for benching. 2) Payment for Earthwork under this item shall be made based on the cross section measurements calculated (i) with original ground profile of existing bank based on initial ground levels before doing benching and (ii) final profile of the bank worked out with final levels as per prevailing guidelines.

manufacturing material by using only hard and durable stone crushed in mechanical crusher to different gradations, wet mixing of the same in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS- 0004 with latest correction slips. Note: This item shall be used only when entire constituent of blanketing material is mechanically manufactured by crushing of hard and durable stone into desired gradation of designed proportion. Recoupment of ballast in running line with railway's stone ballast from existing stacks available along alignment either on top of cutting or on cess or at toe of bank by head leads or by any other means and spreading to make up deficiency in the required profile with contractor's labour, tools & plants, as directed by Engineer-in-charge. Note: Payment shall be made based on ballast stack measurement.

3904.00 average lead of 50m or part thereof when total average lead exceeds 50m, but up to 250m. Note: This item may be used only in exceptional circumstance under prior order on record. BHAVNAGAR DIVISION-ENGG/WESTERN RLY Manufacturing, supply and stacking of machine crushed Track Ballast conforming to RDSO Specification (IRS-GE-1) with latest correction slips at Railway depot or nominated location. Note: Distance of nearest quarry mentioned in each sub-item is only for the purpose of selecting the items for preparation of estimates/tender schedule, based on the minimum distance between nearest quarry and centre of supply points and will not affect the selection of quarry during physical supply in any way till prescribed specification is met fully.

976.00 100 km and up to 150 km 25mm gap Cess Welding with Railway's welding portion and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with Contractor's labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including all required handling and rehandling of rails, marking of welded joint, painting weld collar with anticorrosive paint, as directed by Engineer in charge. Note: 1 . Only welding portion and related accessories as per Annexure - I shall be supplied by Railways. 2. Welding shall be carried out only by trained welder having valid competency certificate. 3. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing.

92.00 shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

RM Loading of rails of any section and length up to 13 metres in Wagons / Truck / trailer including lead up to 50 metres and lift up to 5 metres.

62.40 possible and traffic block is not required or in Truck/trailer. Loading of tongue rail, stock rail, switch assembly and crossings of any section and length, SEJ, Glued joint etc. with / without P.Way fittings and fastenings, in Wagon / Truck / trailer including lead up to 250 metre and lift up to 5 metre.

40.00 possible and traffic block is not required or in Truck/trailer. Loading, unloading and hauling of 52Kg / 60Kg rail more than 13 metre and up to 39 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic and line protection in case road carriage is not possible for different leads and lift up to 5 metre.

MT BHAVNAGAR DIVISION-ENGG/WESTERN RLY

561.60 for every subsequent Km or part thereof and up to 10 Km

62.40 contractor's Rail Dolly / Dip Lorry Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous m a t e r i a l except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading.

8000.00 item no. 172047 Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: 1 . Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items.

70376.00 item no. 172057 Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc . Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

MT Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

150.00 minimum 1.10 cum bucket capacity

80.00 crane of 12T capacity for misc. works of handling of material BHAVNAGAR DIVISION-ENGG/WESTERN RLY

60.00 other misc. works. Total 7313476.46

Item Breakup - B-NS items

NS/1: Pulling & positioning of rails accurately on Running cess including supporting rails, providing Metre required gap and squaring at ends for renewal preparation, as directed by Engineer In-charge (a) Up to 40 m long rail panel. Note:- (Rate and description of Item based on USSOR-2019 Item No. 061010/061011).

NS/2: Linking of Meter Gauge track on prepared Track formation to correct gauge & alignment with metre Railway's track materials including spreading sleepers at specified spacing, squaring, pairing & fixing rails to sleepers with all types of rail fittings & fastenings including their lubrication as per IRPWM standards. Rate is inclusive of kutcha packing to make track fit for 20 kmph speed: Note: 1.Rates shall include Kuccha packing and surfacing to meet longitudinal level, alignment etc. with all contractor's labour, machines, tools, plant, consumables and oiling and greasing of all the fittings like Fish plates/bolts etc.] 2."Rail cutting and hole drilling shall be paid separately" (a) For sleeper density of 1540 sleepers per km. Note: (Rate and description Item based on USSOR-2019 Item No.121200/121202) of item based on USSOR- 2019 item no.121200/121202)

NS/3: Cutting/cropping of rail of 90R/52Kg or Each lighter section 72 UTS, manually and perfectly vertical with contractor's labour, hacksaw blade and tools & plants - NOTE:1.Manual cutting should be used only in emergencies with prior permission of sectional ADEN where machine cutting can not be arranged in time. 2.Cutting of Rails with blade and forcing to part by using other means to break the rails is prohibited. 3.Rails should be cut right through hacksaw blades only. (a) On Cess Note: (Rate and description of item based on USSOR-2019 Item No. 061180/061181).

NS/4: Drilling of hole in rail of any section and Each any UTS, manually (in emergencies only) with contractor's labours, tools & plants, consumables etc. for (a) Hole of dia. 25mm and above. Note: (Rate and description of Item based on USSOR-2019 Item No. 061210/061211).

NS/5: Gas cutting of rail of various sections with Each contractor's tools & plants, as directed by engineer in-charge: (a) Rail section of 52Kg and above. Note: (Rate and description of item based on USSOR-2019 Item No. 061220/061222).

NS/6: Fixing of wooden distance pieces for Each platforms with contractor's labour, tools and plants of size Wooden Block (size: 1.0m x 0.3m x 0.15m) (a) With Contractor's hard wood block. Note: (Rate and description of item based on USSOR-2019 Item No. 131370/131372) BHAVNAGAR DIVISION-ENGG/WESTERN RLY

NS/7: Casting and positioning of pre-cast cum cement concrete fouling mark as per approved drawing at station yard duly painting letters of fouling mark complete in all respects with all labour, materials including cement tools and plants etc. Note ( rate and description of item based on USSOR -2019 item no. 211050)

NS/8: Assembling complete MG turnout etc. on Set staging or on formation/ballast bed to correct gauge and alignment as per standard drawing, duly leading all types of special size sleepers, switches, crossings, fittings, fastenings etc. with maximum lead of 250m & all lift and testing points with S&T staff for throw of switch etc. at station yard complete and as directed by Engineer in-Charge. (a) 1 in 12 Turnout. Note: (Rate and description of Item based on USSOR- 2019 Item No. 071010/071012).

NS/9: Under Traffic block period Laving / Set Insertion of already assembled MG Turnout do staging, available alongside of track manually Including approach sleepers & connecting newly laid points & crossing with approach track by making necessary cutting & providing closures / cut rails as required and subsequently renewing approach rails with suitable length of cut rails, as required and fixing joints with fish plates, bolts, nuts etc., providing kutcha packing, levelling, aligning, gauging, ensuring proper housing of switch etc. to allow traffic with all leads, lifts etc. complete and as directed by engineer in-charge. (Rate Include Rail cutting and hole drilling) (a) 1 in 12 Points & Crossing. Note: (Rate and description of Item based on USSOR-2019 Item No. 071140/071142). Total 719856.84