Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹92,160
Closing Date
11 Sept 2026, 11:00 am
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
Please see item details
Not Applicable
120 days
Expenditure
General
62
2 conditions
As per attatched special condition of Tender
In keeping with the Public Procurement (Preference to Make in India) Order, 2017 as amended and in terms of Clause 2.4.2 of instructions to tenderers for e-Tender, Rev. 1.21 of April-2024(along with all correction slips), Public Procurement of this item is restricted to Class-I & Class-II local suppliers only. Thus, only Class-I & Class-II local supplier as defined under the Public Procurement (preference to Make in India) Order, 2017, as amended shall be eligible to bid in this tender. Offers from vendors who do not quality to be Class-I & Class-II local supplier shall be summarily rejected and, therefore, such vendors should not participate in the tender. In case any vendor who does not qualify to be a Class-I & Class-II local supplier for the tendered item participates in the tender, such a bidder does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the bidder on this account. NOTE -: As per Public Procurement (Preference to Make in India) Order, 2017, procurements where the estimated value to be procured is less than Rs 5 lakhs shall be exempt from this Order.In terms of sub clause 8A of clause 2.4.2 of Instructions to tenderers for e- Tenders, Rev. 1.21 of April-2024(along with all correction slips), Bidders are requested to indicated the local Content in their offered product in the requisite field in the offer form.
22 conditions
At the time of tender bidding the bidders shall be required to indicate percentage of local content.The bidders should mandatorily indicate of percentage of local content in their offer in IREPS.
In terms of clause as per Para 2.4.3 of Instructions to Tenderers for Electronic tenders Rev.1.21 of April-2024 regarding Restrictions on procurement from a bidders of a country which shares a land border with India, I, hereby confirm that I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and I certify that I am not from such a country.
The tenderers in their bids shall indicate the details of their jurisdictional assessing officers (Designation, address & email ID). Also tenderers are required to furnish the correct HSN code for the offered item along with their bid
The bidder while submitting their bids shall give the following declaration: " We agree to pass on such additional setoff/input tax credit as may become available in future under the GST provision in respect of all inputs used in the manufacturer of the tendered item on the date of supply, by way of reduction in price and advised the purchaser accordingly".
In case of third party inspection being applicable as per estimated value of the tender , tenderers must upload a letter from OEM on OEM's letter head giving address of manufacturers premises where inspection shall be done otherwise the offer will be liable to be ignored. This may be combined with letter of authorization itself.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
By Third Party Agency(TPA) at manufacturers premises before dispatch
Annual Maintenance contract as per clause 17 of bid document part-II
Evaluation Criteria is as per Clause 5 of Section- IV of Bid document Part-II
Other terms& conditions as per Bid document part-II( ASRW specification) and subsequent clarifications.
In eligibility criteria attached as Special condition for tender please read Annexure-2 under Bid document Part-I as Annexure-4 under ITT_Rev_121_ April 2024 or latest along with all correction slips as on tender closing date issue by NR.
1 condition
Validity of offer: No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Punjab · 1 Numbers total
Hydraulic PRESS CAP.- 200 TON
62265104A~NR
62265104A
Open - Indigenous
Mixed (Goods/Service/AMC)
Punjab
₹0
₹92,160
19 Aug 2026
19 Aug 2026
3 items · 1 Numbers total
The cost of basic machine "Hydraulic Press-200 Ton", Cost of concomitant accessories, Cost of any other accessories which in the opinion of supplier is essentially required for making machine fully functional,Cost of turnkey charges viz. foundation, installation & commissioning etc., Duties,and taxes, insurance and freight as per tender specification [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BS/ASR, NR | Punjab | 1.00 Numbers |
| Total | 1 Numbers | |
The Cost of comprehensive AMC for five years after the warranty as per clause 17 as per tender sp ecification [ Warranty Period: 2 years, AMC Period: 5 years, Rate of Discounting: 8 % ] ]
The cost of Preventive Maintenance during 1st & 2nd year of warranty period as per tender specifi cation ]
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Signedspecofhydraulicpresscap200T23032026_11zon.pdf Signedspecofhydraulicpresscap200T23032026_11zon.pd
ATTACHMENT
5799336.pdf
ATTACHMENT
Signedspecofhydraulicpresscap200T23032026_11zon.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].