REPAIR TO FLOORING, PLASTERING, CEILING, GLAZING AND ALLIED B/R ITEMS IN CERTAIN OTM ACCN MESSES GUEST ROOMS ETC UNDER AGE BR II IN ARMY AREA JODHPUR (8892/E8)

Amount

Demolition of Cement concerte in ground floor and paving n exc 15 cm thickness below or above ground level , complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as specified and as directed.

M/L for 25mm thick cement concrete type B-0 1:2:4 (using 15mm graded crushed stone aggregate) , complete all as specified and as directed.

M/L for 75mm thick cement concrete type D-2 , 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base , complete all as specified and as directed.

S&F machine made precast cement concrete blocks (Interlocking pavers ) rubberised finished coloure of 60mm thick top layers of anti abrasive material laid over and incl 25mm thick sand cushion. The interlocking tiles joint will be filled with fine sand, complete all as specified and as directed.

S&F machine made precast cement concrete curb stone blocks using cement concrete 1:2:4 type B1 (20mm graded agg) , complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set jointd and pointed in neat cement slurry in floor , complete all as specified and as directed.

M&L for precast cement concrete laquer coated tiles 30cmx30cmx25-30mm thick machine pressed set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

M&L for 50mm thick PCC 1:3:6 type C1 using ( 20mm graded agg) as in plinth protection finished complete including forming joints in 2 Mtr intervals and filled with butumen mastic , complete all as specified and as directed.

M &L 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes, complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed.

-ditto- all as item No 11 above but 300x450 mmx7 mm thick , complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed.

-ditto- all as item No 14 above but as in skirting, complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed.

-ditto- all as item No 16 above but as in skirting, complete all as specified and as directed.

Vitrified tiles 9-10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

-ditto- all as item No 18 above but as in vertical surface , complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , complete all as specified and as directed.

-ditto- all as item No 20 above but in dado/skirting , complete all as specified and as directed.

M/L for 20 mm thick granite (of any type) machine cut in cooking plateform laid over 10mm thick screed bed in cement mortar(1:4) and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing, complete all as specified and as directed.

Taking down cement plaster any description on brick wall or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc and preparing the surface to receive surface c, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1 : 4 as in backing coat of wall tiles, complete all as specified and as directed.

M&L 15mm thick cement plaster in CM 1:6 on other than fair surfaces or over stone masonary surface faces finished the surfaces even & smooth without using extra cement , complete all as specified and as directed.

M&L 10mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 and finished surface even and smooth without using extra cement as in ceiling , complete all as specified and as directed.

M&L for three coat of white wash after preparation of newly plaster surface as in ceiling, complete all as specified and as directed.

M&L for three coat of white wash after preparation of newly plaster wall surface , complete all as specified and as directed.

M/L two coat of OBD on newly plastered/ unplastered surfaces over two coat of wall care putty (2-3mm thick) on walls & including preparation , complete all as specified and as directed.

M&L for one coat of white wash after preparation of old decorated surface of wall, complete all as specified and as directed.

M&L for one coat of Oil Bound surface distemper after preparation of old decoated surface on walls, complete all as specified and as directed.

Removing complete existing treatment and preparation of old surfaces by brooming down or steel wire brushinng scraping moulds,mossand effloroscent salts &tradiing oil and greasy spots to wall including cornices etc plastered or unplastered surtfaces (old decorated surffaces) and M&L for applying two coat of OBD on newly plastered/ unplastered surfaces over two coat of wall care putty on walls , complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete with and incl plastic water closet seat cover white closed pattern with flat bottom, and mild steel chromium plated or aluminised hinges device including connecting to flush pipe, complete all as specified and as directed.

S&F in repair EWC complete set constellation dual flush (WB consetellation 5 ped constellation, EWC, cistern & lid CON dual flush, seat cover constellation, cistern fitting (water saver-dual flush) etc complete. Make Jaquqr, Hindware or equivalent as approved by Engr-in- Charge.

S&F rep in vitreous china squatting Pan, Orissa Pattern of size 580X440mm white (ISI marked) with integral foot rests and cast iron `P' or `S' trap front or back inlet Including flush pipe 40mm dia HDPE pipe etc, fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely all as directed.

Supply and fixing in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.

S&F in rep Cast iron floor trap of 75mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) , complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose 125mm dia with swivel joints any size incl fixing to steel pipe or union , complete all as specified and as directed.

S&F 15 mm fancy type angle valve cast copper alloy chromium plated screwed high pressure with fancy type handle screwed both ends for iron or union and fixed in repairs.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.

S&F CP wall mixture 3-in-1 system including 1.50m long tele shower and overhead shower of size 150x150mm, complete all as specified and as directed. . Make jaquqr Cat No 7281 or equivalent of specified makes

S&F of in repair Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore pipe , complete all as specified and as directed.

S&F in repairs brass chromium plated basin mixure with hot and cold arrangements, long sank suitable for fixing of 15 mm bore of ipe of approved quality Make Jaguar , cat No CON-167B or equivalent of specified makes

S&F PTMT waste coupling of 32mm dia for wash basin as in repairs all as specified and directed, complete all as specified and as directed.

S&F for 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 210gms), complete all as specified and as directed.

S&F of CP mild steel grating 100mm dia as in repairs, complete all as specified and as directed.

Taking down steel water tubing and connection, incl cleaning for re-fixing or remove to store all as specified (a) 15mm dia

(b) 20mm dia

(c) 25mm dia

Refixing of GI Tubing medium grade complete including all fittings to walls for the following dia of pipes, (a) 15mm dia

(b) 20 mm dia

(c) 25mm dia

S&F GI Tubing medium grade fixed to walls or laying in trenches, complete including all fittings and fixtures of the following dia of pipes, complete all as specified and as directed. (a) 15mm dia

(b) 20 mm dia

(c) 25mm dia

S&F for gun metal gate valve 25mm dia, cast copper alloy screwed pressure with crutch or butterfly handle , screwed both ends for iron pipe for union pipe and fixed as in repairs, complete all as specified and as directed.

S&F as in repairs two way Bib cock cromium plated fancy type 15mm , complete all as specified and as directed. Make; Prayag

S&F as in repairs 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed , complete all as specified and as directed. Make; Prayag

S&F as in repairs 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed , complete all as specified and as directed. Make; Prayag

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges device PVC seat covers for water closet pan (pedestal pattern), complete all as specified and as directed.

S&F in repairs Wash basins, Vitreous China white, flat back, size 630x450mm excluding tap, waste chain and plugs but including brackets(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed.

S&F of vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ),with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe ) in repairs, complete all as specified and as directed.

S&F in repair PVC waste pipe for WHB/Urinal complete all as specified and as directed.

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed Cat No- 1111 Make:- Jaquar or equivalent.

S&F of tubular towel rail 20mm dia D type 60cms long between flanges brass chromium plated as in repars, complete all as specified and as directed.

S& F toilet paper holder chromimum plated all as per specified and directed.

S&F towel ring of CP & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 90gms), complete all as specified and as directed.

S&F Looking Mirror Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) (450x125x25mm), complete all as specified and as directed.

S & F for Lookong mirror glass shelves (Size : 450x125mm) fixed with and including Chromium plated brass screws and wooden/plastic cleats Make :- Vista, Plumber

S & F for Corner Glass shelf 300mm Make :- Vista, Plumber

S&F in rep health foucet with 1000mm long flexible mild steel tube with wall hook complete all as specified and directed by Engineer-in-Charge.(Make : Jaquar Cat Part No ALD-CHR-565)

S&F in rep PVC Jet with flexible tube complete all as specified and as directed by Engineer-in-Charge.

S&F sinks with drainage board made of stainless steel .80 mm thick for kitchen with plugs , washer and waste including fixing contilever brackets and connecting union to pipes overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed in repairs, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100mm bore & taken out of trenches if required as directed

All as per item No 76 above but 75mm dia

S&F of 100 mm bore Cast iron soil, (sand cast) waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall, complete all as specified and as directed.

S&F for CI pipe (Sand cast) 75 mm dia laid in floor with cement joint , complete all as specified and as directed.

S&F CI bends any radius 100mm

All as per item No 80 above but 75mm dia (SWR) CI bends any radius

S&F CI SWR vent cowl 100mm

S&F in rep of PVC coated curtain rod 22 to 25 mm dia with and including two Nos MS brackets and decorative type knobs at ends of each curtain rod fixed to wall complete as directed by Engr-in-Charge.

Taking down steel ventilator of any description n. exc 1sqm each, complete all as specified and as directed.

S&F Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc , complete all as specified and as directed.

Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area not exc 1.5sqm each , complete all as specified and as directed.

Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each , complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings, complete all as specified and as directed.

S&F factory made solid pannel PVC door shutters 30mm thick (style) consisting of frames made of MS yubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail and botom on either side and as gap insert for top rail and botom rail,paneling of plain colour PVC sheet to be fitted to the MS frames/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement,supplying and fixing in the frame at site as per specifications and drawing, complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer on steel and iron surfaces over 10 cms in width or girth not other wise descrived including preparation of new surfaces all as specified and as directed by Engr-in-Charge.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete.

S&F 150mm size Aluminium anodized barrel bolts of extruded section complete.

Demolition of stone masonry built in cement mortar including all quoins arches,pillars etc,but exxcluding ashler facings,dressed stone masonry complete all as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 , complete all as specified and as directed.

All as per item No 95 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

Providing precast cement concrete Type C1 1:3:6 using (20mm graded aggregate), solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in CM (1:6), complete, in walls, complete all as specified and as directed.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar , complete all as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 , complete all as specified .

M/L two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation , complete all as specified and as directed.

M&L for preparing the old surfaces by steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts, trading soil and greasy spots etc and applying two coats of cement base paint on old external walls, complete all as specified and as directed.

S&F for Providing precast cement concrete louvers & jallies,30- 35mm thick in 1:2:4, Type B0 (Using 12.5mm graded agg) and fixed in CM 1:4, complete all as specified and as directed.

S&F for Providing precast cement concrete in 1:2:4, type B1 (Using 20mm graded agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), strings courses, coping, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicatd), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar complete with joints to match, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads n exc 0.5 Sqm each , complete all as specified and as directed.

S & F of 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty or Aluminium Beading in square exc 0.5 sq m in each pane, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wooden beading in square not exc 0.5 sq. m in each pane, complete all as specified and as directed.

S&F Figured glass 3mm thick, pin head type and glazing with oil putty or wooden beading in squares not exc 0.5 sq. m in each pane, complete all as specified and as directed.

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.

M&L for 5mm thick coloured PVC sheet tiles for insulation and accoustic purpose, 60x60cm in size, fixed on with and including pre powder coated GI section snap grid of size 605x605mm frame work for false ceiling and complete all as specified and directed by Engr in Charge.

M&L for perforated particle particle board/tiles for insulation and accoustic purposes, 60x60cm in size, including S&F GI pre powder coated snap grid of size 65x65mm including two coats of oil bound distempers after preparation of new ceiling board, complete all as specified and as directed.

S&F 12mm thick plain gypsum board false ceilinng with GI frame work including all necessary drilling, cutting to fix electical items complete all as specified and directed with followings:- (a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to centre along with perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 guage placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runners of size 45x10x10mm of 24 guage fixed @ 1200mm centre to centre leaving frame of one side wall (in other span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200 mm centre to centre incl plugging in RCC slab.

M&L prefabricated, 75mm wide POP moulded cornices, moulding fixed on ceiling/wall complete all as specified and directed.

M&L prefabricated, pre reinforced, 600mm dia POP moulded desiner circle dooms fixed on ceiling/wall complete all as specified and directed.

Dismantling existing water tank of capacity Exc 250 but n.exc 500 ltrs capacity and S&F rotational moulded polyethylene water storage tank

Ditto but Exc 500 but n.exc 1000 ltrs

S&F Rotational moulded polythylene water storage tanks 500 ltrs capacity (cylendrical vertical with closed top) hoisted .

Ditto but 1000 ltrs capacity

M/L for 15-17 mm thick Udaipur green (of any type) machine cut in cooking plateform laid over 10mm thick screed bed in cement mortar(1:4) and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing complete.

SURESH TRADERS

SNEH CORPORATION

Jai Doulat Construction Co

ABHOG INFRASTRUCTURE PRIVATE LIMITED