Providing lean to roof in front of the renovated old Control Room Building into AE O and M Kodumudi Office Building at Kodumudi 110 KV SS.

Amount

Earth work excavating and depositing on bank with initial lead of 10m and initial lifd of 2m in hard stiff clay, Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Plain cement concrete in CC 1:4:8, using 40 mm HBG metal for flooring including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Floor finixhing with CM 1:5, 20 mm thick including cost of cement, labour, curing, all leads and lifts etc., complete as per standard specification.

Design,fabrication,supplying and erection of shed at infront of newly formed section office using PPGI sheet of 0.44 mm thick powder coated roll forming profile with designed sheets for roof lean to roof with necessary channels made up of structural steel for vertical and horizontal supports and painting with 2coats of enamel paint, necessary foundation for structual columns and finishing line with adjacent flooring area,including cost of material, labour lead,lift etc complete.

Fabricating, supplying and fixing of structural steel for safety grills., as per specification and one coat of red oxide primer and Two coats of enamal paint including cost of steel and painting materials, lead, lift, labour, as per standard specification, etc., complete and as per instruction of Engineer at Site.ete.

Providing and fixing of aluminium partition made up of 63.5mm x 38.1mm x 1.2mm section for vertical and horizantal and 95mm x 44mm x 1.2mm for bottom section for aluminium main frame work vertical and horizontally fixed to the floor with clamps and screws. The partition will be claded with 9mm thick laminated particle board of approved shade upto height of 3' and glass 5mm thick plain float glass in the top portion including the cost of snap on clips rubber gaskets, locks, handles etc., complete.

Chipping and cutting of weathering course tile joints and filling with cement paste mixed with leak proof agent and top plastered with CM 1:3, 10 mm thick including cost of cement, all materials, labour, curing, all leads and lifts, etc., complete as per standard specification.

Supplying and fixing of ISI make horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure door (metal) with 40 A 4 pole MCB isolater as incoming, 32 Amps Three Phase 500 V 4 pole change Over Switch and 6 Nos 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth conection as per standard specification, etc., complete.

Supplying and fixing of TNEB meter Board suitable fpr 32A Three phase sevice connection with 3 Nos 32Amps fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat )on TW plank of size 600x450x19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire t from EB meter to fuse unit.