66/EDC(H)/2025-26

Safe Loading carriage & unloading of following material from store centre to pit site/JE Dump store

PCC pole 8.5/9/11 mtr long

11 KV XLPE cable of size 3x185/3x120/3x70 sq mm

G1 Wire

11 KV Indoor Metering cubicle

Stay Set Complete

11 KV Pin insulator with GI pin

11 KV Disk Insulator with Fitting

11 KV V Type Steel X-arm

MS Earthing Rod (2540x20 mm) With Fitting

11/0.4 KV T/F 63/100 KVA

11/0.4 KV T/F 25/16/10 KVA

11 KV outdoor, pole mounted CT/PT unit.

ACSR Weasel Conductor

Erection of Single PCC 8.5/9/11 mtr long with Grouting & Fiting with all neeessary accessories

Erection of PCC 8.5 mtr long double pole with Grouting & with all accessories

Grouting and Nozzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule. All material except earthing rod,gi wire shall be supplied by the contractor.

cable hoisting with GI pipe (GI pipe and other required material shall be supplied by contractor).

Laying of 11KV 3x185/3x120/3x70 sq mm XLPE single cable by digging of trench of size 500 mm wide 900 mm after laying of cable boxing with brick, local sand and stone slab.

Installation of 11 KV CT/PT double metering unit of constructed double pole structure as per RESPO norms. Only 11 KV CT/PT unit shall be supplied by department

Fixing & commissioning of 11 KV pilfer Resistance meter (25/5Amp.) All material except pilfer Resistance metering cubical shall be supplied by the contractor.

Fabrication erection and commissioning of 63/100/25/16/10 KVA T/F on double/single pole with all accessories. All material except 63/100/25/16/10 KVA T/F shall be supplied by the contractor.

Chamical Earthing of T/F 63/100 Complete Work

Fixing Of 11 KV Fuse Set

Stringing & Sagging of three phase 11 kv line on ACSR Weasel/ Rabbit conductor as per RESPO Norms

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line through out pieces of tree branches of site (Approx 3 Km).