Karnataka

Financial Eval

Works

Irrigation and Other Works

Rejuvination of varuna tank by natural biological system(NBS)coming under the atchkat of D-24 of DDUC & Providing fencing and construction of parking area and restaurant in varuna tank premises coming under the atchkat of D-24 of DDUC

4 new corrigendums available.

Cauvery Neeravari Nigam Limited

CNNL No 2 VCC Div Mysore | Karnataka

Amount: ₹10.8 CrCloses: 20 Jan 2026Closed

Timeline

Published6 Jan 2026
Closed20 Jan 2026
Financial Evaluation—
Award—

Bids

1 Bid20 Jan 2026

#	Company	Amount	Status
1	P DASARATHARAMA REDDY ₹11.7 Craccepted-finance	₹11.7 Cr	accepted-finance

Corrigenda

Corrigendum

4 updatesLatest on 12 Jan 2026Submission Ends:13 Jan 202620 Jan 2026

Date changes

Published12 Jan 2026Submission Ends13 Jan 202620 Jan 2026Bid Opening14 Jan 202622 Jan 2026Financial / Cover Two Opening16 Jan 202628 Jan 2026

Tender Value

₹10.8 Cr

EMD Value

₹10.8 L

Closing Date

20 Jan 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Bhaskar A S

Office Number

Work Description

Rejuvination of varuna tank by natural biological system(NBS)coming under the atchkat of D-24 of DDUC & Providing fencing and construction of parking area and restaurant in varuna tank premises coming under the atchkat of D-24 of DDUC

Tender Information

Tender ID

CNNL/2025-26/IW/WORK_INDENT4231

Reference Number

CNNL/2025-26/IW/WORK_INDENT4231

Tender Type

Open

Product Category

Irrigation and Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL No 2 VCC Div Mysore

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with valid UDIN along with audited balance sheets to be furnished

Requiredwork done certificate for minimum quantities as per tender document

Requiredsimilar nature work done certificate issued by Executive engineer should be uploaded in the prescribed formatas per tender document

RequiredContractor/COMPANY/JV Registration Certificate as per tender document

RequiredGST and Pan card details as per tender docuemnt

RequiredLOC certificate issued by bank in prescribed format as per tender document

Requiredlist of key minimum technical personal required with qualifiacation certificates

RequiredDocuments required key equipments/vehicles

RequiredOther all necessary required documents in prescribed format

RequiredOn hand works and proposed for acceptance work details

RequiredESI and EPF Registration certificate as per tender document

RequiredLabour Regitratioon certficate as per tender document

RequiredIncome Tax Return for the preceding five financial year 2020-21 to 2024-25 as per tender document

Eligibility Criteria

NOT APPLICABLE

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending bidder/firm/company/Joint Venturer should furnish the copy of the certificate of registration issued by state/ central Govt.

The Intending bidder/firm/company/Joint Venturer are advised to visit the site of work and also access the tender documents well in advance.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

The requisite Earnest Money Deposit (EMD) through ONLINE only with validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e- payment will be rejected. Under this section of qualifying criteria, the tenderer should furnish capacity details / format.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid.

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in e-portal within 3 days of opening of technical Bid

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer,CNNL,No 2 VCC Division, Mysuru during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events.

Defect liability period is THREE YEARS from the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

Joint venture as per KW6 Tendering by a joint venture of Contractors is permissible Partner limitation is Three-1plus1 subject to following conditions. If the Applicant comprises a number of firms combining their resources in a joint venture, the legal entity constituting the joint venture and the individual partners in the joint venture shall be registered and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GoK

The joint venture must satisfy collectively the Qualification criteria. For this purpose, the following data of each member of the joint venture may be added together to meet the collective qualifying criteria

Average annual turnover as per KW-6

Particular experience including key production rates as per KW-6

Financial means as per KW-6 of STD

Personnel capabilities as per STD KW-6

Equipment capabilities as per KW-6

Each partner must satisfy the following criteria individually as per KW-6

General construction experience for the period of years stated in bid document -kw-6

Adequate sources to meet financial commitments on the other contracts as per KW-6

Financial Soundness as per KW-6

Litigation History as per KW-6 of STD In accordance with the above, the Application shall include all related information required for individual partners in the joint venture.

Joint venture is allowed as per KW-6 STD.

One of the partners, who is responsible for performing a key function in contract management or is executing a major component of the proposed contract, shall be nominated as being in charge during the tendering periods and, in the event of a successful tender, during contract execution. The partner in charge shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the joint venturethis authorization shall be evidenced by submitting a power of attorney signed by legally authorized signatories of all the partners.

All partners of the joint venture shall be legally liable, jointly and severally, during the tendering process and for the execution of the contract in accordance with the contract terms, and a statement to this effect shall be included in the authorization mentioned IN KW-6 OF STD. To enable the above, each of the partners of the joint venture shall meet not less than 25% of the qualifying criteria specified for Average annual turnover and Line of credit / liquid assets. All members of the joint venture must have experience in execution of similar works.

A copy of the Joint Venture Agreement entered into by the partners shall be submitted with the Application.Pursuant to KW-6 OF STD the JVA shall include among other things the JVs objectives the proposed management structure the contribution of each partner to the joint venture operations the commitment of the partners to joint and several liability for due performance recourse sanctions within the JV in the event of default or withdrawal of any partner and arrangements for providing the required indemnities.

The qualification of a joint venture does not necessarily qualify any of its partners to tender individually or as a partner in any other joint venture or association. In case of dissolution of a joint venture prior to the submission of tenders, any of the constituent firms may qualify if they meet all of the qualification requirements, subject to the return approval of the employer Individual members of a dissolved joint venture may participate as subcontractor to qualified applicants, subject to the provisions mentioned below

No firm can be a sub-contractor while submitting a tender individually or as a partner of a joint venture in the same tendering process. A firm, if acting in the capacity of sub-contractor in any tender, may participate in more than one tender, but only in that capacity. A tenderer who submits, or participates in, more than one tender will cause all the proposals in which the tender has participated to be disqualified

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.

The application made by the firm / company shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney shall be submitted.

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document.

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority

The intending Bidderfirm company Joint Venturer should furnish list of manpower available with him for taking up above work

The intending Bidder/firm/company/Joint Venturer shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the preceding five financial year (2020-21 to 2024-25)

The intending Bidder/firm/company/joint venturer shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2020-21 to 2024-25) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate.

The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution.

The intending contractors/firm/company/Joint Venture are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 & KW-6

Contractors should be registered as KPWD/CPWD Class I Category.

The required documents listed under Sections 3, 5 and 8 shall be filled and complied in without exception. If any of the documents mentioned in Section 3 are not uploaded, the Tenders of such Tenderers shall lead to rejection as Non-Responsive.

Prevailing GST shall be paid to the tendered amount separately.

Failure of the successful Tenderer to comply with the requirements of Sub-Clause 24.1 shall constitute sufficient grounds for cancellation of the award and forfeiture of the earnest money deposit

Employees Provident Fund Registration certificate along with copy of recent paid challan is to be furnished.a. In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF.

b). However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The intending bidder/firm/company/Joint Venturer are advised to visit the site of work before attending the pre- bid meeting and also before submitting the tenders.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the circularGabhooE/Kagagu/disibi/2024-25 Dated:28-1-2025

The contractors /firm/company/Joint Venturer should provide valid present postal address and contact number for Communication.

The rates quoted by the contractor must be inclusive of all Taxes, etc., (excluding GST). The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Applicable GST will be paid separately & GST will be deducted as per the prevailing Govt Orders from time to time.

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

The work includes all lead and lift / de lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height.

Performance security Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5.00% of the contract price plus additional security for unbalanced tenders (If quoted below) in accordance with the clause 25. 5 of ITT and clause 43 of the conditions of the contract. Cash/ Bankers cheque/ Demand draft/ Pay order/ e-Bank Guarantee in favour of Executive Engineer,CNNL,NO 2 VCC Division, MYSURU payable at MYSURU or specified small saving instruments pledged to CNNL, NO 2 VCC DIVISION, MYSURU.

Security Deposit Will be withheld till the expiry of the defect liability period.

Building and other construction workers welfare cess

The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / Item rate

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending payment of the work.

Tendering by the joint venture will be entertained.(as per KW-6)

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Sub leasing/subcontracting are liable for rejection

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site,identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand) confirming to relevant IS specifications may be allowed during the remodelling work

The rates include all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the ScheduleB includes all lead and Lifts irrespective of the distance and height,no extra claim will be entertained for additional lead and lifts.

The contractor should have capacity of deploying centralized batching plant along with the transit mixture during execution of concrete works for both structures and lining.

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement.

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled and his EMD will be forfeited

Related to qualification condition No2, Idle charges for men and machineries for non-progress period delayed due to any reasons will not be paid

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons.

The undersigned reserves the right to either postpone or to cancel the entire process of tender.

Typo graphical errors if any will not be the ground for any claims by the contractor

Technical Criteria

Past Experience

The intending bidder/firm/company/Joint Venturer should have satisfactorily completed (90 percent of the contract value individually executed) as a prime contractor, at least one similar work like Improvements to Tank by Natural Biological System/Tank Improvements and beautification works of value not less than (50 percent of the amount put to tender) i.e. not less than Rs.541.70 Lakhs during the last five financial years from 2020-21 to 2024-25. The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer,The cost of completed works of previous years will be given a weightage of 10 percent per year based to bring them to 2025-26 level rupee price value

Satisfactory Performance Certificate

Capabilities of Vendor

The intending bidder / firm/ company/ Joint Venturer should have executed in any one financial year, the following minimum quantities of work in the last five years satisfactorily. (2020-21to 2024-25)1. Earthwork in all types of soil classification/Embankment -82140.00 cum 2)RCC/PCC Cement Concrete of all grade-3410.00cum 3)Reinforcement steel-114.00MT, 4) Desilting-99895.00cum 5)Rubble stone pitching-11935.00sqm 6) cc paver block-5625.00sqm NOTE :- The criteria above applies to the Intending bidder/Firm/joint venturer also. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer

Work Done Certificate

Each Tenderer should further demonstrate Availability by owning the following key and critical equipment for this work The intending bidder/firm/company/Joint Venturer should furnish details of ownership of Machineries/Equipments etc., to an extent of more than 50% of the requirement and also should furnish copies of lease agreement of hiring of Machineries/Equipments etc. to be deployed for this work. 1)Ajax/concrete mixter-4nos(own-2nos, lease/hire-2nos), 2)Excavator-4nos(own-2nos, lease/hire-2nos), 3)Tippers 10 wheelers/6 wheelers-6nos(own-3nos, lease/hire-3nos), 4)Vibratory soil compactor 8/10 tonne capacity-2nos(own-1no, lease/hire-1no), 5)Water Tankers min 5000 litres-4nos(own-2nos, lease/hire-2nos)

Others -- machinery

List of key technical personnel required for the work is as under1)Project Manager BE Minimum 10 Years experience he should have executed min two similar projects of Natural biological system.-1no,3)Diploma in CivilEngineering with 5 years experienece-2nos, 3)Environmental engineer-BE in Environmental engineering with Minimum 5 years experience-1 No

Others -- key persons required

The intending bidder should furnish the relevant class-1 PWD certificate of registration issued by state/central.

PWD Registration Certificate (Class I/II/III/IV)

list of exisiting commitments and ongoing works

Others -- existing commitments and ongoing works statement in prescribed format

list of works for which tenders already submitted

Others -- bid submission details

Financial Status

The following qualification criteria should be met by the intending bidders/firm/company/Joint Venturer.a)Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of value not less than the two times estimated annual payment under this contract i.e. Rs:2166.50 Lakhs.Audited balance sheet certified by Chartered Accountant shall be furnished along with valid UDIN. (Additional weight age at 10 percent for each year will be given for turn over to bring it to 2025-26 price level

Audited CA Certificate of Annual Turnover

The intending bidder/ firm/ company shall furnish details of liquid assets/ availability of credit facilities of not less than (the equivalent of the estimated cash flow for 3 months in the peak construction period) amounting to Rs.325.00 Lakhs(considering 30%) for meeting the required funds in the form of credit lines/ letter of credit/ certificate from any Nationalized Banks/ Scheduled commercial Banks in the prescribed format.

Line of Credit

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender Capacity (AxNx1.5- B)Where,A Maximum value of civil engineering works Executed in anyone year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress.N is Number of years prescribed for completion of the works for which tenders are invited.11/12 Years 0.916 years B Value, at 2025-26 price level of existing commitments and on-going works to be completed during the next 11 months (Period of completion of the works for which tenders are invited Note-1 The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer incharge, not below the rank of an Executive Engineer/ Equivalent

Others -- existing commitments and ongoing works statement in prescribed format

Fee & Financial Details

Tender Fee Amount

₹7,500

EMD Fee Amount

₹10.8 L

Important Dates

Last Activity

20 Jan 2026

Published

6 Jan 2026

Bid Opening

22 Jan 2026

Download Ends

9 Jan 2026

Pre-Bid Meeting

8 Jan 2026

BOQ Preview

•

Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable mater...

•

Desilting of tank bedFeeder ChannelCanal in dry condition by excavating the deposited bed material and loading the same to transport vehicle excluding cost of transportation including cost of...

•

Desilting of tank bedFeeder ChannelCanal in dry condition by excavating the deposited bed material and disposing off the same by stacking formation of Embankment or as directed including cost o...

•

Providing casing embankment using semipervious pervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layer of 250 to 300 mm (before compaction) includ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution l...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes m...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Gabion Structure for Erosion Control River Training Works and Protection works Providing and constructing gabion structures for erosion control river training works and protection works with wire crat...

•

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bindi...

•

Providing and constructing dry rubble stone pitching with pin headeat 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing wedging...

•

Providing rubble stoneboulder filling between or behind abutmentbelow apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complete ...

•

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material ...

•

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar

•

12 but excluding excavation p...

•

Providing and laying 100mm thick factory made precast M 40 grade Cement Concrete Paver Block as per IRC SP 632018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA for...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and guttefixed with CM 13 fixed and finsihed in line as per direction of Engineer in charge. As per the direct...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

•

Installation of product pipe by manual jacking method Manufacturing providing, transporting, rolling, lowering, laying & jointing testing commissioning of ERW (Electric Resistance Welded) SAW (Submer...

•

Excavating of rammingjackingdriving pit and receiving pit of size 5.00m(length) x 3.00m (breadth) up to 6.00 m depth in all soil strata including shoring and strutting including cutting of AsphaltCCMa...

•

for maintenance SemiSkilled labourAs per the direction of Engineer In Charge

•

procurment of bamboo trees Data sheet 19 rising of plantation Fpr the Year 202425. For 278 plants As per the direction of Engineer In Charge (278 plants)

•

wedelia plants Vegetative (Khus grass) Bunds Planting Khus grass or local available suitable grass on bunds with the following items of works (including transportation)As per the direction of Engineer...

•

a. Digging of bamboo beds, uprooting of 1 to 2 year old bamboo Rhizomes, (without causing damage) tying in bundles and loading them into the lorry at nursery site (excluding cost of bags and fibre thr...

•

b. Transportation of bamboo Rhizome bundles in lorry from nursery to the plantation site and unloading up to 10 km distance As per the direction of Engineer In Charge

•

Conveyance of bamboo Rhizome bundles from roadside to pits at the rate of 2 rhizomes per pit As per the direction of Engineer In Charge

•

d. Opening of pits, filling with red earth up to 30 cms and planting Rhizomes As per the direction of Engineer In Charge

•

Raising of plants (a)Bharav by loosening the soil to a depth of 10 cm around the plants and to a radius of 50 cm, and earthing up of the loosened soil at the collar region for natural plants. As per t...

•

b. Preparation of bamboo stakes, transportation to planting site, fixing and tying to the miscellaneous plants As per the direction of Engineer In Charge

•

Carrying the water manually from the water source and watering at the rate of not less than 50 liteof water per plant for seedlings planted in MFP plots Refractory plots with plant density not more th...

•

d. Collection of thorny materials of 2 meteand above in length and tying the materials firmly to the stem of the plant wherever stakes are not provided As per the direction of Engineer In Charge

•

f. Scooping Digging of soil to a depth of 5 cm, 23 Mtapart marking the spot in the natural forest area and sowing of seeds, refilling up the soil after sowing and formation of small mound with mummty ...

•

maintinence of bamboo (a)Reopening of pits of size 0.30 m x 0.30 m x 0.30 m for replacement of causalities As per the direction of Engineer In Charge

•

b. Weeding inside the trenches and on mounds of 4 meter length As per the direction of Engineer In Charge

•

Scraping of grass and other growth around the trench of 4 m length to a width of 60 cm on each side of the trenches As per the direction of Engineer In Charge

•

d. Soil working the trenches by digging with pickaxe to a depth of 15 cm. and to a width of 60 cm. starting from the lower edge of the trench towards the other side of trench of 4 m length so as to l...

•

maintinence third year (f) Decongestion of clump by removing dead malformed clumps As per the direction of Engineer In Charge (per clamp)

•

Design fabrication supply erection and commissioning of embedded parts ( with top seal seat ) consisting of sill beam wheel tracks seal seats guide rails groove lining upto top with all accessories fo...

•

Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate ( with top seal ) consisting of skin plate siffenehorizontal and vertical girdewheels guide roll...

•

Design fabrication supply erection testing and commissioning of adequate capacity screw type hoist consisting of supporting structure platfom railing ladder with all accessories for operating c...

•

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ro...

•

Upto 8000.0 m2 (2.0 Acres) WORK TO BE UNDER TAKEN DURING MAINTENANCE Watering The plants and lawns in the garden should be watered frequently as required looking to the climate soil and plant conditi...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washeas required complete as per the direction...

•

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfacesas per the direction of Engineerin...

•

Providing and fixing Steel work welded in built up sections framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural st...

•

Providing and constructing 300 mm thick rubble stone pitching set in CM 1 5 proportion by volume with pin headeat 2 per m2 including cost of all materials from approved source labour packing stone ch...

•

Providing and fixing factory made precast RCC perforated drain covehaving concrete of strength not less than M25 of size 1000 x 450x50 mm reinforced with 8 mm dia four nos longitudinal & 9 nos cross s...

•

Providing and laying 300 mm diameter open jointed hume pipes with collain rocktoe for drainage including cost of all materials machinery labour and all other ancillary operations complete As per the d...

•

Providing and laying in position Cement Concrete for all Foundation works The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super p...

•

A Sinking of 165mm dia Borewell Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electric...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m Fixing of casing pipes collaand cap w...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 42702001 and latest ammendments electrical resistance welded steel tubes mate...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia The thickness of plate used for covering one end shall be 3mm (minimum) ...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 80342000;3Phase SS Bowl & Impeller with Low volt Motor as per specifications to work site as per necessary ammen...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (PartI) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar ...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 6941990 with ISI Mark and as per its latest amendments.1x3x4 Sqm...

•

Supply and delivery at site of brand new best make nonreturn valve as per IS 7781984 with ISI Mark and as per its latest amendments Size 50 mm As per the direction of Engineer InCharge

•

Supply and delivery at site of brand new best make gate valve as per IS 7781984 with ISI Mark and as per its latest amendments Size 50 mm As per the direction of Engineer InCharge

•

Supply installing testing and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Vol...

•

Labour charges for Erection Electrification and commissioning of Pump sets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps c...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc comple...

•

Supplying of TPST with rewirable porcel a in channels in SM enclosureAs per the direction of Engineer InCharge Made out of 14 SWG powde rcoated paint of approved colour 63AAs per the direction of Engi...

•

Supply and fixing polished woodboard made of not less than15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws 20 x 20 x ...

•

Supplying and fixing HRC fuse units base on existing switchpanel board 32 to 63 AAs per the direction of Engineer InCharge

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends junction box elbows screws at an interval of 300 mm as required 38 mm As per the direction of...

•

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earthwire) FRLS multistrand PVC insulated copper wire (...

•

Supplying fixing wiring earth electrode for grounding conduits I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5m long buried inapit. The pit should be fi...

•

Supplying, fixing and wiring heavy duty low voltage capacitoconforming to IS 2834. 3 phase 400440 V grade for power factor improvement of rotating machineries like induction motor As per the direction...

•

Distribution Transformer 3 Phase 11kV433V Amorphous Core with Oil as per IS1180 (Part1) 2014 B CABLE ENTRY TYPE 25 kVA Aluminium Wdg Star 2 (5 Star) As per the direction of Engineer InCharge

•

Erection of 25 to 63 kVA Transformer on Transformer Structure As per the direction of Engineer InCharge.

•

LT Protection Kit As per the direction of Engineer InCharge.

•

LT Distribution Box as per IS13947 Part 1&2 As per the direction of Engineer InCharge.

•

Lightning Arrester as per IEC600994 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR As per the direction of Engineer InCharge.

•

HG Fuse Unit as per IS5350 Part2 11 kV HG Fuse Unit with Solid Core Insulator As per the direction of Engineer InCharge.

•

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Metefor 3 Phase 4 Wire Metering wi...

•

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS7098 (Part2) Armouring wires dia and Resistivity as per IS3975. As per the direction of Engineer In...

•

11 kV Jointing & Cable Termination Kit as per IS13573Heat Shrinkable Type Transition Jointing Kit for XLPE Cable 3x95 Sqmm As per the direction of Engineer InCharge

•

11 kV, Jointing & Cable Termination Kit as per IS13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm. As per the direction of Engineer InCharge

•

11 kV, Jointing & Cable Termination Kit as per IS13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 SqmmAs per the direction of Engineer InCharge.

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Supplying and running of GICopper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip.As per the direction of Engineer InCharge

•

Supplying and running of GICopper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip As per the direction of Engineer InCharge

•

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required 600x600x3mm Copper plate As per the direction of Engineer InCharge

•

SCRAPPING AND REMOVING TOP SOIL Scrapping the area by removing 0.15m soil and removing of unwanted plants,grass along with roots.25km in itial transport,including lead, lift loading and unloading char...

•

1STDIGGINGDigging of the area for developing lawn including removing weeds,debris if any and breaking of clumps, watering etc. (1x1x0.45mt)As per the direction of Engineer InCharge.

•

2NDDIGGINGDigging of soil by removing gras setc if any and levelling of the soil etc ..As per the direction of Engineer InCharge.

•

procurement of quality red earthsoil and heap around pit (1x1x0.15mt) As per the direction of Engineer InCharge.

•

Supply of inputs such as sand,FYM,Red earth in136 ratio.mixing and spreading the mixture to 7.50cm thickness wherever required.* Red soil0.0075cum, *Farm Yard manure0.0225cum, Sand0.045cumAs per the d...

•

Procurement of quality lawn grass Bermuda GrassAs per the direction of Engineer InCharge.

•

Labour Charges mixing Inputs as perprescribed proportion and quantity and spreading,applying fertilizers,digging,levelling,and dibbling with lawn grass at a spacing of 5cmx5cm& as per the direction of...

•

Growing of Flower beds using cormsbulbs,Digging of 1.0mx1.0mx0.45m area and filling 50 of the area with top soil and remaining 50 area with 123 proportion of sand (0.0375 cum),FYM (0.075 cum) red eart...

•

Growing of Hedges Digging trench of size 1mx0.30mx0.45m and filling 50 of the trench with top soil and remaining 50 trench with123 proportion of sand (0.0112) FYM (0.0224cum) red earth (0.0336cum) and...

•

Upto 8000.0 m2 (2.0 Acres)WORK TO BE UNDER TAKEN DURING lawn MAINTENANCE Watering The plants and lawns in the garden should be watered frequently as required looking to the climate soil and plant cond...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Loosening leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment scarified to a depth of 150 mm mixed with water at OMC and then compacted b...

•

Construction of subgrade and earthen shouldewith approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet re...

•

Construction of Granular SubBase of required grading as per design spreading in uniform layewith motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compact...

•

Construction of M30 Grade unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC 270 kgm3 and GGBS 90 kgm3 coarse and fine aggregate conforming to IS 3832016 ma...

•

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturespecifications including appropriate priming coat preparation of surface, etc complete On concrete work i...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights i...

•

Providing and injecting chemical emulsion for Preconstructional AntiTermite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top surfa...

•

Filling available excavated earth (excluding rock) in trenches plinth sides of foundations and other similar works etc in layenot exceeding 20cm in depth consolidating each deposited lay...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layenot exceeding 20cm in depth, consolidating each deposited layer by ramming and wat...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma...

•

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super ...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1612 (1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size) upto p...

•

Providing and laying in position Cement Concrete for all Super structures of building Road works Water worksIrrigation works & super structure works of bridges upto 3.50 m height The granitetrapbasal...

•

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrapba...

•

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height The granitetrapbasa...

•

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works, Irrigation works & super structure works of bridges upto 3.50 m height The granitetrapbas...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 1 cement 6 coarse sand As per the direction of Engineer In Charge

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 16 (1 cement 6 coarse sand As per the direction of Engineer In Charge

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 16 (1 cement 6 coarse sand As per the direction of Engineer In Charge)

•

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS 2222 in superstructure above plinth level in cement mortar 16 (1 cement 6 coars...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 13 (1 cement 3 coarse sand) inclu...

•

Providing and fixing flush door shutter made out of solid core block board type well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...

•

Providing Salwood frames of doowindows clerestory windows ventilatoand other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but i...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 136 of 20mm and down size granite...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mmAs per the direction of Engineer In Charge

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia 300mmAs per the direction of Engineer In Charge

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mmAs per the direction of Engineer In Charge

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm As per the direction of Engineer In Charge

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mmAs per the direction of Engineer In Charge

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 leveand a pair of lever handles of approved quality with necessary screws etc. complete.As per the direction of Engineer...

•

Providing and fixing expansion hold fasteneon C.C.R.C.C.Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm As ...

•

Providing & Fixing of corner beads of wooden door frame to wall including cost of materials labour charges complete as per specifications As per the direction of Engineer In Charge

•

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work hard and soft wood including preparing the surface after thorougly cleaning oil grease dirt a...

•

Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied 0.90L10 m² over an under coat of primer applied 0.75 L10 m² of approved brand and manufacture to give an even s...

•

Providing& fixing of Partition made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gas...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round baetc. including priming coat with approved steel primer all complete. Fixed to steel w...

•

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron steel works including preparing the surface after thorougly cleaning oi...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 14 (1 cement 4 fine sand) to brick masonry including rounding off cornewherever required smooth rendering providing...

•

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and ...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 14 (1 cement 4 fine sand) to brick masonry including rounding off cornewhe...

•

Finishing walls with 100 Premium acrylic emulsion paint having VOC less than 50 gL and UV resistance as per IS 154892004, Alkali & fungal resistance, dirt resistance exterior paint of requ...

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

•

Providing and fixing suitable Plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gm2 width along route of walls chipped for se...

•

Providing and laying Vitrified tiles with thickness 910 mm in different sizes with water absorption less than 0.08 and conforming to I.S. 15622, of approved make, in all colou& shade, over 12 mm thic...

•

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...

•

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing staircase railing and similar works including applying priming coat of approved steel primer. G...

•

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid 7 Powder) to the RCC surface like Roofbathroom to...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...

•

40mm dia pipes, From wash basin waste linesProviding and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes j...

•

50mm dia pipes, From sink & urinal waste linesProviding and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This include...

•

75mm nominal dia pipes Providing and fixing Sewer (SWR) pipes, including all fittings This includes jointing of pipes & fittings with one step solvent cementrenching refilling & testing of joints comp...

•

110mm nominal dia pipes Providing and fixing Sewer (SWR) pipes, including all fittings This includes jointing of pipes & fittings with one step solvent cement trenching refilling & testing of joints c...

•

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories completeAs per the direction of Engineer In Charge

•

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansi...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the wall...

•

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS8931.As per the direction of Engineer In Charge

•

Providing and fixing brass bib cock of approved quality 15 mm nominal boreAs per the direction of Engineer In Charge

•

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineerincharge.As per the direction of Engineer In Charge

•

Providing and fixing unplasticised PVC connection pipe with brass unions (30 cm length 15 mm nominal bore)As per the direction of Engineer In Charge

•

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gAs per the direct...

•

15 mm nominal dia PipesProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, ic fixi...

•

20 mm nominal dia PipesProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings, ic fixi...

•

25 mm nominal dia pipesProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings ic fixin...

•

32 mm nominal dia pipesProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipeshaving thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings ic fixin...

•

25 mm nominal dia PipesShafts & TerraceProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded ...

•

32 mm nominal dia PipesShafts & TerraceProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded ...

•

40 mm nominal dia PipesShafts & TerraceProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded ...

•

25 mm nominal boreProviding and fixing ball valve (brass) of approved qualityHigh or low pressure with plastic floats complete As per the direction of Engineer In Charge

•

32 mm nominal boreProviding and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) As per the direction of Engineer In Charge

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet outlet and ov...

•

Earth work excavation for pipelinescables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights remova...

•

Refilling available earth around trenchespipelines cables in layenot exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m Inclu...

•

Pipes of SN8 Self Fit 160mm dia.Providing UPVC FOAM CORE pipes conforming to IS 16098 P1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and ...

•

Pipes of SN4, 160mm dia.Providing UNPLASTICISED PVC pipes conforming to IS 160982013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and lowering i...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 16 bed concrete 150mm thick with 136, plastering ...

•

Providing and fixing squaremouth S.W. gully trap class SP1 completewith C.I. grating brick masonry chamber 150 x 100 mm size P type WithNon Modular common burnt clay bricks of designation 3.5 & with w...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduitcasing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire...

•

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 12Way...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch As per the direction of Engineer In Charge

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch As per the direction of Engineer In Charge

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket As per the direction of Engineer In Charge

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. As per the direction of Engineer In Charge

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch As per the direction of Engineer In Charge

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket As per the direction of Engineer In Charge

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch As per the direction of Engineer In Charge

•

Supplyin and Fixing Metal Fan Box with Round Hook. As per the direction of Engineer In Charge

•

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalPVC junction boxes adhesive paste etc., and running before concreting the slab. ...

•

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends metalPVC junction boxes adhesive paste etc and running before concreting the slab. Th...

•

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalPVC junction boxes adhesive paste etc and running before concreting the slab. T...

•

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalPVC junction boxes adhesive paste etc by groove cutting in wall and fixing by br...

•

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS6...

•

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS69...

•

Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc.with provision for fixing suitable type capacity MCBs singl...

•

Supplying and fixing miniature circuit breake on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit ...

•

Supplying and fixing miniature circuit breake on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF energy cross3 with Short circuit b...

•

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 1625 Amps 2 pole As per the direction of Engineer In Char...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 (Part 1) or IS7098 Part1, Armouring strip thickness and resistivity as per IS397570 Sqmm, 3.5 ...

•

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rolleas directed by the departmental staff 35 sqmm to 95 sqmmAs per the direction of Engineer In Charge

•

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia As per the direction of Engineer In Charge

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit The pit should ...

•

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required 25x3mm GI strip As per the direction of Engineer In Charge

•

Supplying of ......feet PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hou& 70 lumen maintenance with CRI 80 Power Input 220240V 5060Hz & Power fac...

•

Supplying & fixing of retrofit type LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70. efficacy 80 lumen per watt life 25000 burning houand Compliance...

•

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applicationsAs per the direction of Engineer In Charge

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying exhaust fan of 1440 RPM of 300mm (12) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.As per the direction of Engineer In Charge

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS37419 and also comply with IS 17091984 with latest amendment, Rated voltage 220 V50 Hz, Rated power...

•

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling raftegirdeusing 230.0076 twin twisted PVC insulated wires, required Nos of round...

•

Fixing a ceiling wall mounting fan of all capacities and all types, with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of...

•

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 amps ceiling rose wit...

•

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4 dia telescopic M. S. pipe, with 2 dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. s...

•

Fixing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clampsbolt nuts and wiring using suitable capacity wires. As per the direction of Engineer In Charge

•

CAFETERIA PANELFabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipatio provided with hinged...

•

Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC in...

•

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washeetc.,and painted with 2 coats of red oxide and then two coats of approved paint ...

•

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washeetc.,and painted with 2 coats of red oxide and then two coats of approved paint ...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodpanel board using necessary screws bolts nuts necessary phase separators, handle an...

•

Supplying and fixing miniature circuit breake on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit ...

•

Supplying and fixing miniature circuit breake on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit ...

•

Supplying and fixing miniature circuit breake on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF energy cross3 with Short circuit b...

•

Supplying of multi function digital meter with three line back light LCD type display for voltageCurrent frequency Power, power factor KVAKWHKVAR suitable for 3 phase4 wire LT network with IP ...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 1224v D.C. As per the direction of Engineer In Charge

•

Supplying, fixing and wiring 505 to 4005Amps 15VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. As per the direction of Engineer In Charge

•

Fixed Camera Specifications

•

Lens type Bi focal auto iris with 10x digital zoom

•

Image size 720x486 (NTSC)

•

Streaming High speed

•

Weather Proof IP 66 compliant

•

Network Protocol TCPIP...

•

Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr. As per the direction of Engineer In Charge

•

Supplying and drawing UTPCAT 6E LAN cable As per the direction of Engineer In Charge

•

Supplying & Fixing of Patch panel for LAN cabling24 Port 101001000 patch panel.As per the direction of Engineer In Charge

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager.12U with 450mm depth. As per the direction of Engineer In Charge

•

Supplying heavy gauge PVC conduit pipe 25mm dia.2mm thick confirming to IS 2509 with suitable size bends, metalPVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

•

Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit in required thickness over gravel layer, for all leads & lifts all complete as per direction of Enginee...

•

Providing & fixing of 2.5 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Supplying and fixing regular MCB distribution boards on wallood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase3 phases...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 (Part1) or IS7098 Part1 Armouring strip thickness and resistivity as per IS3975 16 Sqmm 2 Core...

•

Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS13573 16 Sqmm 2 Corecomplete as per direction of EngineerInCharge.

•

Supplying and running of GICopper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip complete as per direction of EngineerInCharge.

•

Supplying and fixing new Mangalore tiles on existing reepers.complete as per direction of EngineerInCharge.

•

Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved ste...

•

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rolleas directed by the departmental staff 2.5 sqmm to 25 sqmm complete as per direction of EngineerInCharge.

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

Supplying and fixing of solar Lux level street light control switch single phase including suitable capacity contactor 3KWcomplete as per direction of EngineerInCharge.

•

Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pitin required thickness over gravel layer for all leads & lifts all complete as per direction of Engineer ...

•

Supplying and fixing regular MCB distribution boards on wallood board flush mounting using required clamps, bolts, nuts etc with provision for fixing suitable type capacity MCBs single phase3 phasesin...

•

Providing and fixing factory made Green certified Anti Termite UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid doorwindowClerestory windows & other Frames Chowkhat comprising of virgin PVC polymer of K value 5860 (Suspension G...

•

Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS 15622, of approved make, in all colours, shades, e...

•

Providing and laying cinder concrete in cement 115 ( 1 cement 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting including cost of materials labour curing c...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 13 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 14 (1 cement 4 fine sand) including rounding off cornewherever required smooth rendering, providing and removing sc...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washecomplete. ...

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS8931As per the direction of Engineer In Charge

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete ClassPremiumAs per the direction of Engineer In Charge

•

Earth work excavation by manual means for drains canals waste weir draft approach channels key trenchesfoundation of Buildings & bridges and such simillar works in all kinds of soils as per drawing an...

•

Earth work excavation by manual means for drainscanalswaste weir draft approach channels key trench foundation of Bridges and such similar works, as per drawing and technical specifications including ...

•

Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores capillaries and microcracks of the co...

•

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 (1 cement 6 coarse sand)As per the direction of Engineer In Charge

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Varuna Package DTS updated 5-1-2026.doc

Tender Document • 2.23 MB

Corrigendum Documents

VARUNA TANK Corrigendum ltr.jpg

jpg • 4.24 MB

VARUNA TANK ADDENDUM LTR.pdf

pdf • 0.99 MB

img20260108_18031571.jpg

jpg • 1.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

P DASARATHARAMA REDDY

₹11.7 Craccepted-finance