Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC | ₹25.8 L Quoted ₹26.9 L | L1 | Accepted-AOC lowet |
| 2 | L2₹29.6 L+₹2.8 L (10.2%)Rejected-Finance | ₹29.6 L+₹2.8 L (10.2%) | L2 | Rejected-Finance other than lowest |
| 3 | L3₹33.0 L+₹6.1 L (22.6%)Rejected-Finance C O CHOUDHARY 45 PEER BABA TARUSHAW ROAD HALWARA A D DISTT LUDHIANA PIN CODE 141106 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141106 | ₹33.0 L+₹6.1 L (22.6%) | L3 | Rejected-Finance other than lowest |
Tender Value
₹30.5 L
EMD Value
₹61,000
Closing Date
28 Sept 2024, 6:00 pmClosed
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001 (Punjab)
Provn of overhead plastic water tank for replacing existing cemented water tank and provn of 35 x fire points at Baddowal under GE Ludhiana
2024_MES_668502_1
GE/LDH-31/2024-25
Open Tender
Civil Works
Item Rate
210 days
Baddowal
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹61,000
Yes
19 Oct 2024
31 Aug 2024
30 Sept 2024
31 Aug 2024
28 Sept 2024
15 Sept 2024
31 Aug 2024 - 14 Sept 2024
Amount
Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work (reinforcement cut as required to facilitate demolition) and removing rubbish off the premises complete all as specified and directed.
Taking down steel water tubing of 15 mm bore including connection & removal to store complete all as specified and directed.
Taking down steel water tubing of 20 mm bore including connection & removal to store complete all as specified and directed.
Mild steel GI tubing 15 mm bore medium weight fixed to walls and floor complete all as specified and directed.
Mild steel GI tubing 20 mm bore medium weight fixed to walls and floor complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) triple layer hoisted and fixed in position including tank nipple and cover suitable for water tank complete all as specified and directed.
S&F Ball brass valves 20 mm bore, high pressure, with polythylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
M&L 40 mm thick PCC 1:2:4 type B-1 (with using 20mm graded crushed stone aggregate) as in coping to Brickwork platform surface finished even and smooth without using extra cement including formwork complete all as specfied and directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified & directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement on external surfaces complete all as specified & directed .
M&L for prepration of newly plastered surface of walls and applying two coat of cement base paint complete all as specified & directed.
S&F gun metal globe gate valves with iron wheel head screwed both ends for iron pipe and fixed suitable for size 15mm bore complete all as specified & directed.
S&F gun metal globe gate valves with iron wheel head screwed both ends for iron pipe and fixed suitable for size 20mm bore complete all as specified & directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed.
Excavation in trenches n exc 1.5 mtr wide & n.exc 1.5 mtr deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in post holes (or similar holes) each not exceeding 0.50 cubic metre in any type of soil , getting out, returning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a distance n.exc 50 mtr and making good surface complete all as specified and directed.
Material and labour PCC ( 1:3:6) type C-2 using 40mm graded crushed stone aggregate in foundation filling and mass concrete complete all as specified and directed.
M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base floor complete all as specified and directed.
M&L 75mm thick cement concrete 1:2:4 type B2 using 40 mm graded crushed stone aggregate as in floors finished surface even and smooth without using extra cement complete all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.
Returning, filling in including spreading, levelling watering and well ramming in leyers n.exc 25cm each layer in soft/loose soil complete all as specified and directed.
Removal of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above starting point in soil complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for two coat of synthetic enamel paint over a coat of red oxide primer of newly steel surface of any description over 10 cm in width or grith not otherwise described complete all as specified and directed.
JASSI TRADERS (BID ID -3102037)
PREM CONSTRUCTION COMPANY (BID ID -3118356)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .