SPECIAL REPAIR TO CHAIN LINK FENCING IN FASF AGARTALA IN ZONE P AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling fencing wire mesh any type

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion and making good to disturbed ground as in natural ground all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out, ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturb surface in soft/loose soil all as specified and directed.

M & L for PCC (1:2;4) type B-2 (using 40 mm graded aggregate)as in embedding of fencing post all as specified and directed.

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, MS iron flats (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

M & L for MS TMT bars 8 to 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.

S & F mild steel screw bolts 11 mm to 15 mm dia (Machine made) with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc. 10 cm and n.exc 15 cm long all as specified and directed.

S & F MS flat iron fillets with hexagonal bolts for fixing to fencing post including securing bolts, cut to shape, drilling holes, notching for wire, bolting or riveting etc and similar works conforming to Fe - 290 Gde - E - 165 all as specified and directed.

Supply only chain link MS Galvanised Fencing any size or any type.

Fixing only chain link fencing.

S & F for Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) all as specified and directed)

M & L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description n.exc 10 cm width or girth all as specified and directed.

M/S UTTAM GANGULY ENTERPRISE

M/S SANKAR GOPE

SHRI SUBRATA GUHA

M/S New Saha Enterprise

M/S NIYATI NETWORK

SHRI RAJESH DEY

M/S PAUL ENTERPRISE