Rate contract for Civil Maintenance, repair works at C-DAC

PART A- PAINTING WORKS

Painting with Plastic emulsion paint of approved quality ( Roller finish ) on old/new surface of inside and outside walls, shades, ceiling etc, after scrapping and cleaning the surface. a) One coat

Painting with Plastic emulsion paint of approved quality ( Roller finish ) on old/new surface of inside and outside walls, shades, ceiling etc, after scrapping and cleaning the surfaceb). 2 or more coat

Painting with Synthetic enamel paint of approved quality two or more coats on old/new surface of inside and outside doors, Ventilators, Shelves, Ceiling, hand rails etc , after scrapping and cleaning the surface.

Painting with Exterior emulsion paint (Apex or equivalent) of approved quality two or more coats (Roller finish) on old/new surface of inside and outside walls, shades, ceiling etc, after scrapping and cleaning the surface .

Painting with wood primer/metal primer/cement primer/oil based primer of approved quality one coat in all floors and levels after preparing the surface for painting including the scrapping and cleaning etc.

Scrapping the existing painted surface with wire brush and sand paper etc and removing the old paint as per directions including cleaning etc.

Finishing the surfaces (any) in all floors and levels with putty to get a required finish as per directions of the C-DAC offical.

Polishing/Buffing with ready made polish or Touch wood to a required finish for partitions, doors, hand rails(SS) etc in all floors after finishing the surfaces with filler ,sealer, sand papering and cleaning etc.

Cleaning of glasses for windows/ventilators/ partitions/ furnitures etc in all floors with approved quality of glass cleaning solutions and water including removing /clearing of paints, stains, dust etc

PART B - ALUMINIUM AND ALLIED WORKS

Labour charges for dismantling of Aluminium partitions ,doors with laminated board and glass etc in all floors without damage and stacking as per directions.

Labour charges for Fabrication and fixing of aluminium partition , doors with Dept: supplied materials like Aluminium frames, laminated board/ glass etc after with necessary modification and alteration as per drawing and direction including the cost screws, cleat rubber, beading etc complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions in all floors with extruded built up standard tubular and other sections of approved make conforming to I.S.733 and 1285 anodized transparent or powder coated to required shade according to I.S. 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections (thickness should be 1.5mm) shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, clips and paneling to be paid for separately).

Providing and fixing 9mm thick prelaminated particle board of approved brand and colour conforming to B. I.S. (both sides pre-laminated) for shutters of doors, windows & ventilators and partitions etc in all floors including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / Neoprene gasket required.

Providing and fixing plain glass (Modifloat or equivalent as approved by Civil Engg:) for aluminium partitions, doors, windows, ventilators etc fixing with PVC/Neopreme gasket etc. Complete. 4 mm thick

Providing and fixing plain glass (Modifloat or equivalent as approved by Civil Engg:) for aluminium partitions, doors, windows, ventilators etc fixing with PVC/Neopreme gasket etc. Complete. 6 mm thick

Providing and fixing plain glass (Modifloat or equivalent as approved by Civil Engg:) for aluminium partitions, doors, windows, ventilators etc fixing with PVC/Neopreme gasket etc. Complete. 8 mm thick

PART C - OTHER MISCELLANEOUS CIVIL AND INTERIOR WORKS

Supplying and fixing Sun control film 25 Micron thick (Garware ) of approved colour for glazing panels of windows, ventilators, partitions and doors etc in all floors.

Supply and fixing “Etch film” (Garware or equivalent ) of approved strip Pattern for glazing panels of Aluminium partitions ,doors, windows etc.

Providing and fixing homogeneous poly vinyl chloride sheet (Tusker or equivalent good quality ) in flooring and skirting in all floors in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quanlity and manufacture like Dunlop S-758 Fevicol SR998 or equivalent including surface preparation, cleaning & filling with JK putty / POP if required and rolling with light wooden roller weighing about 5kg all complete as directed by the C-DAC official. 1.6 to 2mm thick

Providing and fixing homogeneous poly vinyl chloride sheet (Tusker or equivalent good quality ) in flooring and skirting in all floors in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quanlity and manufacture like Dunlop S-758 Fevicol SR998 or equivalent including surface preparation, cleaning & filling with JK putty / POP if required and rolling with light wooden roller weighing about 5kg all complete as directed by the C-DAC official. 1 to 1.5mm thick.

Providing and fixing mirror glass of 6mm thick superior quality with PU coating on mercury side, polished edges and mounted to the wall with SS mounting accessories.

Earth work excavation in all kinds of soil with all leads as per instructions ,including filling the sides etc with excavated earth ,ramming ,shoring and shuttering of sides if necessary complete as per direction,disposed earth to be levelled and neatly dressed.

Providing and applying 12mm to 15mm cement plaster of mix 1:4 (1 cement : 4 fine sand) finished with a floating coat of neat cement on all surfaces such as concrete walls, brickwalls, columns, beams etc; at all heights.

Providing & laying PCC in Cement Concrete 1:2:4 using 20 mm broken stone including levelling,curing etc. complete in any levels.

Brick work in any floors with cement mortar 1:6 with cement concrete blocks/burned fire clay bricks, all inclusive rate.

Providing & laying RCC in Cement Concrete 1:2:4 including shuttering, curing etc. complete.

Providing and laying coloured Full body Vitrified Tiles(600x600mm),stain free/nano finish in flooring/skiriting of different sizes and conforming to IS 15622 in approved colour and shade laid on 40 mm thick cement mortar 1: 4 and grouting the joints with matching colour epoxy joint filler,including preparation of base surface,cleaning and finishing at all heights. Basic rate of tile is Rs.750/Sqm. Make: Asian Granito or equivalent.

Providing and laying glazed anti skid ceramic tiles group 4 of approved colour and laid on cement mortar 1: 4, grouting the joints with matching colour epoxy joint filler etc; including preparation of base surface, cleaning and finishing at all heights.Basic rate of tile is Rs.500/Sqm.

Providing and fixing frameless Patch fitted glass door with 12mm thick clear float toughened glass of size (2.4 x 0.9/1.0/1.2) m with double acting floor springs and related patch fittings of Dorma/ Geze or approved equivalent make including all necessary hardware and accessories such as 450 mm SS H-handles, Mortise lock with one side knob and other side key, pivot etc. Make: Geze or equivalent.

Providing and fixing clear toughened float glass of 12mm thick, which will be held within the embedded Slim anodised aluminium channels at top and bottom fixed to the floor and ceiling with appropriate type Hilti/Fischer make ss fastener.The glass to glass joints will be sealed with approved transparent weather sealant. All glass edges shall be of polished finish.The work includes necessary M.Steel P.U painted sub-structure above false ceiling which is anchored to roof slab to support the glazing system. Make: Geze & Saint Gobain

Providing and fixing suspended Seamless Gypboard false ceiling in all shapes and design, which includes providing and fixing GI perimeter channels of size 0.55 mm thk having one flange of 20 mm and another flange of 30 mm and a web of 27 mm along with a perimeter of ceiling, screw fixed to brick / partition with the help of nylon sleeves and screws, at 610 mm centers. Then suspending GI intermediate channels of size 45 mm, 0.9 mm thk with two flanges of 15 mm each from the soffit at 1220 with ceiling angle of width 25 mm x 10 mm x 0.55 mm thk fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thickness having knurled web of 501.5 mm and 2 flanges of 26 mm each with lips of 10.5 mm are then fixed to the intermediate channels with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm centres 12.5 mm tapered edge gypboard (conforming to IS: 20951982) is then screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centers. Rate to be inclusive of cutting and making good the ceiling for AC ducts, grills, diffusers, lights, trapdoors etc; fixing of any additional ply or padding as support for light fixtures, AC fixturees etc complete the work with any stepping if required as per design. Make: USG Boaral or equivalent.

Providing hinged service door with 12 mm thick marine plywood and its outer surface finished with aluminium composite panel inclusive of SS hinges and locks arrangements etc. complete.(60x60 cm).

Providing and fixing GRID CEILING with 15 mm thick mineral fibre 600 x600 mm tile of 'Armstrong' make with 24mm wide T -section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm and a load carrying capacity of 23.71 Kgs/M2. The T Sections have a Galvanizing of 120 grams per sqm & passed through 500 hrs of Salt test which includes flush fitting, to lay in 15mm thick Sky Fissured/ Star Pin/ Sand Texture Microlook Edge ceiling tiles. Make: USG Boral or equivalent.

Supply and fixing of Motorised Roller Blinds (blackout) with Group control facility of approved shade and finish for windows and partitions etc including the cost of all accessories. Make : Somcy/Duyoo or equivalent.

Supply and fixing Roller Blinds of approved shade and finish (manual type) for windows and partitions etc including the cost of all accessories. Make: Vista or equivalent.

Providing and laying water proofing treatment in toilet floor areas/ roof tops or any other concrete slab areas required by applying cement slurry mixed with water proofing cement compound.The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry etc. complete. Make : FOSROC / ARDEX

Providing and fixing 18 mm thick gang saw cut granite slab, mirror polished of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch-ups, including rubbing, curing, moulding and polishing edges to high gloss finish etc; at all heights. Basic rate of granite is Rs.2200/Sqm.

Closing the gaps with 12 mm marine plywood between glazing and wall / floor inclusive of support structure if any required as per instructions.

Panelling with boxing upto 10 cm with 12 mm Marine plywood inclusive of support structure if any required as per drawings / instructions.

Lalumon KA

SURESH INTERIOR AND CIVIL WORKS