Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.7 CrAccepted-AOC AA CLASS RUDRA COMPLEX 100 FEET ROAD SRIGANGANAGAR RAJASTHAN | SRIGANGANAGAR | SRIGANGANAGAR | RAJASTHAN | ₹1.7 Cr | L-1 | Accepted-AOC After Negotiation |
| 2 | L-2₹1.8 Cr+₹14.2 L (8.40%)Rejected-Finance | ₹1.8 Cr+₹14.2 L (8.40%) | L-2 | Rejected-Finance Second Lowest |
| 3 | L-3₹1.9 Cr+₹15.7 L (9.28%)Rejected-Finance | ₹1.9 Cr+₹15.7 L (9.28%) | L-3 | Rejected-Finance Third Lowest |
Tender Value
₹1.9 Cr
EMD Value
₹3.9 L
Closing Date
11 Nov 2019, 6:00 pmClosed
MD, RSWC, JAIPUR
Bhawani Singh Road, Jaipur 0141-2565087 rswcho at the rate gmail.com
Repair work, Conversion of Roof sheets and Water Harvesting work at State Warehouse, Jodhpur I and II, Bilara and Phalodi.
2019_RSWC_166772_1
13932_Jodhpur_Bilara_Phalodi
Open Tender
Civil Works
Percentage
150 days
RSWC State Warehouse at Jodhpur, Phalodi, Bilara
Tender Fee, Processing Fee, EMD, PAN, Valid Registration Certificate of Contractor GST No. Registration, P.F. Registration, Work Experience Certificate of Building/Godown
4 documents required · 4 mandatory
₹2,360
Rajasthan State Warehousing Corporation
₹3.9 L
17 Jan 2020
21 Oct 2019
13 Nov 2019
21 Oct 2019
11 Nov 2019
21 Oct 2019
Amount
BILARA
Providing and fixing colour coated galvalume profile sheets with the depth of 30mm and pitch of corrugation 200mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.60mm (TCT) total coated thickness (tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 (zinc aluminium alloy coating nominal composition: 55% aluminium 43.5% zinc & 1.5% silicon mass total of both sides) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheets should be supplied in single length as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55mm) with EPDM seal and washers of make-Coroshield / durotuff ( as per engineer in charge) excluding the cost of purlins, rafters and trusses and including cutting to size and shapes wherever required. All screw should be sealed with sillicon sealant.
Supplying and Fixing of turbo ventilators on the top of godown roof with high performance industrial turbo ventilators of minimum 600 mm dia neck of aluminum alloy, designed to wind speed of 50m/sec and inclusive of base plate & all necessary accessories, specification of multi roof ventilator got approved from Engineer-in-charge before installation.
JODHPUR-I & II
Providing and fixing colour coated galvalume profile sheets with the depth of 30mm and pitch of corrugation 200mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.60mm (TCT) total coated thickness (tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 (zinc aluminium alloy coating nominal composition: 55% aluminium 43.5% zinc & 1.5% silicon mass total of both sides) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheets should be supplied in single length as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55mm) with EPDM seal and washers of make-Coroshield / durotuff ( as per engineer in charge) excluding the cost of purlins, rafters and trusses and including cutting to size and shapes wherever required. All screw should be sealed with sillicon sealant.
Supplying and Fixing of turbo ventilators on the top of godown roof with high performance industrial turbo ventilators of minimum 600 mm dia neck of aluminum alloy, designed to wind speed of 50m/sec and inclusive of base plate & all necessary accessories, specification of multi roof ventilator got approved from Engineer-in-charge before installation.
PHALODI
Providing and fixing colour coated galvalume profile sheets with the depth of 30mm and pitch of corrugation 200mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.60mm (TCT) total coated thickness (tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 (zinc aluminium alloy coating nominal composition: 55% aluminium 43.5% zinc & 1.5% silicon mass total of both sides) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheets should be supplied in single length as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55mm) with EPDM seal and washers of make-Coroshield / durotuff ( as per engineer in charge) excluding the cost of purlins, rafters and trusses and including cutting to size and shapes wherever required. All screw should be sealed with sillicon sealant.
Supplying and Fixing of turbo ventilators on the top of godown roof with high performance industrial turbo ventilators of minimum 600 mm dia neck of aluminum alloy, designed to wind speed of 50m/sec and inclusive of base plate & all necessary accessories, specification of multi roof ventilator got approved from Engineer-in-charge before installation.
M/S Modern Construction Company
G.S.Bansal and Company
M/S Modern Construction Company
M/s Satish Kumar And Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .