Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC 99 C PIPE ROAD CHINIAMORE PO BARRACKPORE PS TITAGARH DIST 24 PARGANAS N KOLKATA 700120 WB | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.2 L+₹3.2 L (10.6%)Rejected-Finance 71 A LOOTERY MAHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS N KOLKATA 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Rejected due to higher rate from L1 | |
| 3 | L3₹33.6 L+₹3.6 L (11.9%)Rejected-Finance | L3 | Rejected-Finance Rejected due to higher rate from L1 | |
| 4 | L4₹34.4 L+₹4.4 L (14.7%)Rejected-Finance | L4 | Rejected-Finance Rejected due to higher rate from L1 | |
| 5 | L5₹34.8 L+₹4.8 L (15.9%)Rejected-Finance | L5 | Rejected-Finance Rejected due to higher rate from L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
WELCOME MAINT AT OFFICERS MARRIED QTR AT 6 WING UNDER GE (AF) BARRACKPORE
2023_MES_594614_2
8435/BKP/AF OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE AF Barrackpore
Class-D,
Category-a(i)
2 documents required · 2 mandatory
₹500
GE AF Barrackpore
₹60,000
Yes
3 Aug 2023
17 Jun 2023
10 Jul 2023
17 Jun 2023
8 Jul 2023
24 Jun 2023
Amount
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as directed
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
All as per item No 6.00 but exc. 1.50 sqm but n.exc 4.00 sqm each and -ditto-.
Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 Sqm each and refixing in the same opening complete all as specified and as directed.
Taking down wooden door/window of area n.exc 4.00 sqm each carefully and refixing in the same opening after necessary repair such as stay handle etc and making good to existing surface with cement mortar complete all as specified and as directed. Note:- Concrete required for fixing hold fast shall be included in quoted rate.
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed.
Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed
Material and labour for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed.
Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed.
Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.
Supply and fixing for 40mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium dencity, wood particle with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.
Material and labour for 40mm thick second class hard wood framed, ledged braced and battened shutters, supplied and fitted to chowkats complete all as specified and as directed.
Material and labour for second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n. exc 200 cu. cm each complete all as specified and directed.
Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed.
Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Supply and fix 100mm long aluminium handles, cast type, anodized complete all as specified and directed.
Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed.
Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.
Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
Supply and fix in repair 25 mm dia aluminium anodised decorative type drapery rod complete all as specified and directed.
Supply and fix in repair galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix in repair 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.
Material and labour for mild steel TMT bars 8mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Supply and fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Supply and fix in repair 18/19mm thick pre-laminated particle board, exterior grade, pre-laminated both side with decorative choice lamination including 2nd class hard wood leaping fixed to frame work complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor and finish the surface evev and rough to receive tiles complete all as specified and directed.
Material and labour for virified ceramic tiles (light shade) (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
All as per item No 40.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:3) and -ditto-.
Material and labour for glazed ceramic tiles of size 300x200x7 mm / 450x350x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:3) complete all as specified and directed.
Material and labour for 20mm thick black marble (black zebra Kishangarh) tiles machine cut in skirting/dado and jointed with grey cement slurry including cutting and polishing of type laid over and including 20mm thick cement screed bed or bedding layer in CM (1:6) complete all as specified and directed.
Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed.
Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement on wall complete all as specified and directed.
Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement in ceiling complete all as specified and directed.
Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed.
Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 3mm thick wall care putty including preperation of surface complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of french polish complete all as specified and directed.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden bead in square not exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed.
Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden bead in square not exc 0.5 Sqm in each pane complete all as specified and directed.
Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty / wooden bead in square exc 0.5 Sqm in each pane complete all as specified and directed.
Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviciable GI pipe complete all as specified and directed.
Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviciable GI pipe complete all as specified and directed.
Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) after dismantling of old existing tank complete all as specified and directed.
Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed.
Supply and fix in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Supply and fix in repair 15mm bore brass telephonic hand shower chromium plated with 1.5 mtr flexible tube and hook complete all as specified and directed.
Supply and fix in repair 15mm bore brass angle cock fancy type, chromium plated for iron pipe complete all as specified and directed.
Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fix in repair swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed.
Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections complete as specified and directed.
Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fix in repair vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste pipe, chain & plug and porcelain stopper but with brackets and 32 mm bore waste coupling PTMT (minimum weight 45gms) including cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fix in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fix in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.
Supply and fix in repair brass chromium plated toilet paper holder complete all as specified and directed.
Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fix in repair 125mm PTMT grating doom with waste hole (minimum weight 40gms) complete all as specified and directed.
Supply and fix in repair 40mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
Material and labour for cleaning and removing all scale and dirt etc.by mechanical means (i.e stage-1 - mechanized de-watering, stage-2 -mechanized sludge removal, stage-3 - high pressure cleaning by pressure jet, stage-4 -scrubbing by mini hand scrubber machine, stage-5 - high pressure cleaning by pressure jet, stage-6 - vacuuming by industrial vacuum cleaner, stage-7 - Anti bacterial spray (hydrogen peroxide), stage-8 - UV-Ray treatment. from tanks and from mouths of circulating pipes etc capacity exc. 500.00 litre and not exc. 1000.00 litre complete all as specified and directed. Note:- (i) Any damage occured to the tank during the process of cleaning the tank shall be replaced with new tank by the contractor without any extra cost. (ii) The quoted rate shall include for guarantee of a period of six month from the certified date of cleaning. (iii) All debris and waste material obtained during cleaning of tank shall be disposed at a location decided by Engineer -in- Charge distance exc 0.5 Km but not exc 1.5 km without any extra cost. (iv) The quoted rate shall be also included obtaining signature of user in register duly authenticated by Engineer -in- Charge.
KUMAR ENTERPRISE
M/S. B. N. CHATTERJEE
Oenix and associates
APOLLO TRADERS
ZENITH CONSTRUCTION
M/S. NARSINGH ENGINEERING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .