civil wok

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, baling out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation and basement, etc with crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling in foundation and basement, etc with GRAVEL in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in Cement Mortar 1:5 (one cement and five crushed stone sand) using best quality fly ash bricks of size 23 x 11 x 7cm including curing etc., complete complying with standard specifications. Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost.

Foundation and Basement.

Ground floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement.

Ground floor

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement.

Ground floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Brick partition walls of 11.50 cm thick using best quality fly ash bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 [One Cement and Three crushed stone sand] using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) In Ground floor

Paving the floor with best quality Non Slippery Double charged Vertified Tiles of size 600 x 600 x 8mm of Euro/ kajaria or Equivalent make of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with first quality Non Slippery Design colour ceramic tiles of size 305 x 305 x 6 mm of Euro/ kajaria or Equivalent make laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with colour designed digital print Joint free glazed tiles with borders of size 300mm x 600mm x 10mm of Euro/ kajaria or Equivalent make in Cement Mortar 1:2 (One Cement and Two Crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing granolithic floor finish 50mm thick with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supplying and fixing of M.S.grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees.The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

providing and erecting in position including assembling, fittings and fixing MS gear operated type approved make rolling shutters (with ISI monogram) with pressed MS guide channels of size 75 x 25 mm -–10 gauge bracket plate, reinforced lock plate with necessary locking arrangement on both sides and the roller shaft of heavy “c” class pipe fitted with high tensile wire springs. Rate shall include fixing the guide channel wall and connected civil works and finished the surface neat etc. complete and all as per standard specifications and as directed by the departmental officers.

providing and fixing classic brown granite dry cladding of superior quality of approved size, design, pattern and shape at all heights for external cladding on horizontal / vertical surfaces of wall faces, pillars, columns, bands, jambs, sills in specified sizes using 100x100x 8 mm stainless steel clamps, self supporting the stones, s.s. angle (at soffit level of beams etc.) of grade 316 of approved make, anchors bolts / dash fasteners, grouting of cramps in stone & walls, maintaining grooves in granite slabs as per drawings including drilling, achoring, grouting, scaffolding, edge polishing, chamfering etc., complete and as per mock sample at site and jointing with cement to which pigment is added to match the shade of granite complete as per drawings and approval of the architect/consultant. net area shall be measured as exposed surface with groove and nothing extra payable on account of wastages, breakages as per specifications & directions of the engineer-incharge. make of fasteners - hilti/fisher. nclusive of clamps of length greater than 150 mm and less than 250mm used instead of clamps mentioned in item no1 of axel make or approved by client. inclusive of chemical fastner hilti make used instead of fastner specified in the item no 1 inclusive of for weather resistant silicon sealent in joints between the stones for stopping penetrationsof rainwater.basic rate of granite shall be rs. 3500 per sqm for 40 mm thickbasic rate of granite shall be rs. 3000 per sqm for 25 mm thick25 mm thick classic brown granite of mirror finish of approved colour and shade with ss cleats /supports 150 /sft including curve/joint details as per the drawings, including all applicable taxes, transportation, loading unloading wastage,octroi etc.

Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat over cement plastered wall surface etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer.dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position CI Nahani Trap of size 100 x 75mm with stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Crushed stone sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying, laying and jointing UPVC pipes (Schedule:80) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.Internal Water Supply arrangements

32mm dia UPVC pipe

25mm dia UPVC pipe

Supplying, laying and jointing UPVC pipes (Schedule:80) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works External Water Supply arrangements above Ground level 50mm dia UPVC pipe

Supplying UPVC Specials for water supply arrangements (both internal and external water supply arrangements (The UPVC specials should be got approved by the Executive Engineer concerned before use on works.).

32mm dia UPVC Elbow

25mm dia UPVC Elbow

32mm dia UPVC Tee

25mm dia UPVC Tee

25mm dia UPVC coupler

32mm dia UPVC coupler

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve (heavy duty) with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

32 mm dia G.M. Gate valve

50 mm dia G.M. wheel valve

75 mm dia G.M. wheel valve

Supplying, laying and jointing UPVC pipes (Schedule:80) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. (Below Ground Level)

80mm dia UPVC pipe

100mm dia UPVC pipe

Supplying and fixing in position 15mm dia brass CP Pillar tap (heavy type) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five crushed stone sand] using best quality of fly ash bricks of size 23 x 11 x 7cm with Plastering in Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete as per standard specification and as directed by the departmental officers..

Inspection Chamber size 600x600x1200mm

Inspection Chamber size 900x900x900mm

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality etc., complete compying with standard specifications

Supplying and fixing of PVC ready made WATER TANK of 1000 Litre capacity of best and approved quality with ISI specification and having inlet,outlet, overflow and clearing pipe arrangements and labour charges for fixing in position with all necessary accessories and transporting to site of work etc., complete and as directed by the departmental officers.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

supplying and fixing chain link fencing of 75x75mm,10gaugewith steel frame of 'L' angle of 50x50x6mm in vertical [email protected] interval and horizontal stiffners of 25x6mm plate @ 1.00 m interval etc.. complete complying with standard specification.

Supplying and fixing of brass dye cast letters of approved size as directed by the departmental officers

English Brass Letters 37cm (15”)

Tamil Brass Letters 15cm

Emblem (15”)

Providing and laying, spreading and compacting graded stone aggregates to wet mix macadam 250mm thick specification including premixing the materials with water at omc in mechanical mix plant carriage of mixed material by Tipper to site laying in uniform layers with pavers in sub base/ base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth

Supplying and laying of Interlocking Paver Block Stone 83mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

Supplying and providing 300mm dia RCC Hume pipe and as directed by the departmental officers

Supplying and fixing 65mm dia G.I. pipe (vertical pipe) including labour charges for cutting welding and fixing with MS flat (excluding cost of flat) etc., and as directed by the departmental officers

Supplying and fixing FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thick in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using 20mm HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Supplying and fixing in position best quality PVC soil / waste pipes of 160mm dia having 6 kg / sq.cm. working pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to be laid below ground level

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site (Site will be shown by the departmental Officers) including construction of mud pit.

Upto 60 m Depth ending below ground level

From 60 m upto 90 m Depth ending from ground level

From 90 m upto 120 m Depth ending from ground level

Reaming 140mm / 150 mm dia pilot bore to 300 mm dia bore as directed by the departmental officers.

Upto 60 m depth ending below ground level

From 60 m depth and upto 90 mt depth ending below ground level

From 90 m upto 120 mt depth ending below ground level

Charges towards placing and marking bore point in the site land with geological surveyor charges

Supplying and fixing 160mm dia PVC end cap suitable for 6"dia bore well of approved quality with ISI mark etc., complete and as directed by departmental officers.

Supplying and delivery of 160mm dia P.V.C. casing pipes (Special Blue pipe for bore well) of best approved quality with ISI mark etc., complete and as directed by the departmental officers.

Supplying of best and approved quality of HDPE pipe of 40mm dia for sub-mersible pump in Bore well class-5 (1 mpa or 10 kg./cm2 pressure) including laying in the bore well and tying with copper wire etc., complete complying with standard specification.

supply and erecting of 5hp /40stage 1 1/4" dia delivery eletronic submersible motor supplied with necessary isi mark including supply and fixing with following accessories for 150 mm dia borewell as directed by the departmental officers a) 2" hp collar - 2 sets, b)green rubber - 1 nos, c)end cap - 1 nos, d)jet clamp - 1 set, e)11/4"g.i.bend - 1 no, f)copper bolt and nuts - 4 nos, g)copper wire -10kg, h)2"g.i.coupling - 2 nos, i)2"x12"barrd nipple -2 nos, j)shellac bottle -2 nos

Supply and laying of following size of armoured aluminium / copper cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the departmental officers. make: polycab /paracon / finolex /equivalent.

supplying and fixing of 3 phase panel board with all the required accessories etc.,complete and as directed by the departmental officers.

Supplying and tying of 1/2 dia Nylon rope for submersible motor of approved quality etc.,complete and as directed by the departmental officers.

Providing Sewage Treatment Plant (STP) 500 KLD capacity with all accessories such as Bar screening – 1 no, Collection pump – 2 Nos, Air pipe line for collection tank – 1 Lot, Air Blower – 2 Nos, Air pipe line for aeration tank – 1 Lot, Sludge pump – 2 Nos, Clarifier Mechanism – 1 Set, Filter feed pump –2 Nos, Sand filter – 1 Nos, carbon filter – 1 No, Treated water pump – 1 No, Ultra Violet system – 1 No, Electromagnetic Flow meter – 2 Nos, Control panel with all cables – 1 Set, Screening chamber – 3 (1.75x1.0x1.5M), Collection tank – 1 (5.5x5.9x4.77M), Equalization tank – 1(5.5x5.9x4.77M), Aeration tank I – 1 (4.5x12.0x4.77M), Aeration tank – 2 (5.5x8.75x4.77M), Settling tank – 1 (4.5 Diax5.77M), Filter feed tank - (5.5x5.9x4.77M), Treated water tank – 1 (5.5x5.9x4.77M), Drying bed – 7 (1.5x1.72x1.2M)etc complete complying with standard specification and as directed by the departmental officers

Fabrication and fixing of double glazing using is 4576-1996 section, specially designed anodized aluminium sections of hindalco/jindal aluminium Ltd. The glass panel must be sticked using adhesive tape with mail section using clear sealant in such a way that no aluminium frame work is visible from outside and the 6mm groves between the panel will be airtight, water proof and dust free thus giving it a flush look from outside. aluminium : anodized aluminium sections 15 microns sealant : dow corning 995 sealant ( black ) tape : adhesive tape specifications : galvanized bracket thick glass : saint gobain make 8mm clear toughened +12 mm air gap + 8mm reflective glass of saint gobain make (or) asi green brook. and other necessary accessories etc complete.

Supplying and fixing 12mm thick clear toughened glass door patch door with all accessories complete and complying with standard specification as directed by departmental officers

Supplying and fixing readymade cable trough for covering cable lines complete and complying with standard specification as directed by departmental officers

Supplying, spreading and mixing red earth, and farm yard manure mixer with required base of chemical for control of pest and disease like neem cake and carbo fureden and fertilizers for root regulator like dap, urea and superphosphate and for mind the mix cost of red earth sand, fertilizers and labour charges etc.,

Supplying and making the lawn mexican grass truffing grass including forking the ground top dressing with sludge manure of fertilizers mixing with the same width forked soil, watering, weeding and maintenance for a period of 90 days or more from the actual date of completion of planting work till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if need etc complete.

Supplying and planting foxtail palm 8 to 10 feet ht, including labour charges and 3 months maintenance work.

Supplying and planting, kendia palm 6 to 7 feet ht. including labour charges and 3 months maintenance work.

Supplying and planting rhapis palm 2 to 3 feet ht., including labour charges and 3 months maintenance work.

Supplying and planting virchamalli gold palm 4 to 5 feet ht., labour charges and 3 months maintenance work.

Supplying and planting livistonia palm 3 to 4 feet ht., including labour charges and 3 months maintenance work.

Supplying and planting, design ficus 3 to 4 feet ht. including labour charges and 3 months maintenance work.

Supplying and planting, arica palm 4 to 5 feet ht. including labour charges and 3 months maintenance work.

Supplying and planting, royal palm 8 to 10 feet ht. including labour charges and 3 months maintenance work.

Supplying and planting plumeria alba dwarf 3 to 4 feet ht., including labour charges and 3 months maintenance work.

Supplying and planting plumeria alba tall 6 to 7 feet ht., including labour charges and 3 months maintenance work.

Supplying and planting terminallia mantaly 4 to 5 feet ht., including labour charges and 3 months maintenance work.

Supplying and planting, ficus panda 1 feet ht. including labour charges and 3 months maintenance work.

Supplying and planting, clerodendrum 1 feet ht. including labour charges and 3 months maintenance work.

Supplying and planting canna hybrid 1 to 2 feet ht. , including labour charges and 3 months maintenance work.

Supplying and planting muraya exotica black 3 to 4 feet ht., including labour charges and 3 months maintenance work

Supplying and planting sehefflera 1 to 2 feet ht., including labour charges and 3 months maintenance work

Supplying and planting ixsora singaporensis 1 to 2 feet ht. , including labour charges and 3 months maintenance work

Supplying and planting tecoma orange 1 to 2 feet ht. , including labour charges and 3 months maintenance work

Supplying and planting, Pentanus 1 to 2 feet ht. including labour charges and 3 months maintenance work

Supplying and planting,spider, varigated 1 to 2 feet ht. including labour charges and 3 months maintenance work

Supplying and planting, spider lilly 1 to 2 feet ht. including labour charges and 3 months maintenance work

Supplying and planting, black lilly 1 to 2 feet ht. including labour charges and 3 months maintenance work

Supplying and planting, heliconia 1 to 2 feet ht. including labour charges and 3 months maintenance work

Supplying and planting bougainvillia 1 to 2 feet ht. , including labour charges and 3 months maintenance work

Supplying and laying coloured pebbles size (20-30 mm)., including labour charges and 3 months maintenance work (25kg/bag)

Supplying and laying natural stepping stone size 24”x24” 75 to 100 mm thickness,

Supplying and laying 63 mm 6 kg PVC pipe, 50mm 15 kg PVC pipe, 40mm 15kg PVC pipe, 63 mm ball valve, lateral tube, dripper, 10mtr surrounding coverage adjustable pop-up sprinkler, 5mtr surrounding coverage adjustable pop-up sprinkler,5hb 3ph open well submersible pump, accessories digging and fitting work. for fountain arrangements etc complete.

Supply and installation of 990 "L" single wall master tank & over flow tank made of 3 mm thick ms plates with nozzles like, inlt, outlet, drain, fill, vent, 1 no manhole.

Supply and fixing of fuel transfer pump & return pumps with necessary flame proof motor out door duty, with coupling and baseframe, rotary gear pump 110lpm @ 25 meter head with suitable flame proof motor. 1 no for working only by as per is/iec 60079-1 ( 1 set = 1 motor + 1 pump)

Supplying and fixing fuel piping - rate including flanges, bolts & nuts, and applying one coat of primer paint including one coat of enamel paint, complete as per technical specification & drawing details.as per is 1239 heavy ( c class)

80mm diameter class "C" MS pipe

40mm diameter class "C" MS pipe

Charges for providing 2 mm thick iwl pyp kote wrapping for pipes laid under ground. (40mm)

Supply and fixing of cast steel body ball valves, confirming to class 150 flanged end.

80mm dia

40mm dia

Supply and fixing of cast steel body y strainer with SS mesh, confirming to class 150 flanged end.

80mm dia

40mm dia

Supply and fixing of wafer type non return valve with class150 rating and cast steel body. 40mm dia

Supply and fixing of CI vent hood with brass mesh for ug tank and intermediate day tank. (as per peso norms)

Supply and fixing of pressure gauges size 4'' dia range 0 - 10 kg/cm2 with isolation valves.

Supply of unloading wire braided rubber hose with aluminium coupling 80mmx3.2 meters.

Supply, fabrication and erection of ms pipe supports with, painting, and GI U clamps.

Supply and installation of hardware items such as anchor fastners etc.

Supplying and laying charges for providing earthing with 40mm dia chemical filled GI rod as per explosive norms. Excluding (civil chamber and cover)

supply and laying of GI flat 25x3mm

supply and laying of copper wire 8 SWG

supply and fixing copper jumpers for flanges

supply and fixing of 9kg DCP type fire extinguisher.

Supply of 9lites foam type fire extinguisher.

Supply of 4 no's fire buckets with stand

Supplying and fixing sign & danger board

supply and installation of flp remote push button station. (on/off)

Supply and laying 4c x 4 sqmm copper aurmoured cable

Supply and laying 4c x 2.5 sqmm copper aurmoured cable

Supply and laying 4c x 1.5 sqmm copper aurmoured cable

Supply and laying of 4cx1.5 sqmm shielded aurmoured copper sensor cables)

Suppying and fixing cable tray - 50x100mm GI perforated (with supports & anchors)

Supply and fixing of flow meter suitable for unloading line with basket strainer at inlet pulse output type to interface with plc

Supply and fixing of flow meter suitable for transfer line with basket strainer at inlet pulse output type to interface with plc

Supply and fixing of flame proof type UG tank level sensor of magnetic float type with necessary 4-20 ma output (30kl UG tank )

Supply and fixing of flame proof type tank level sensor of magnetic float type with necessary 4-20 ma output (990 l intermediate, 4 nos day tank and 500 Loverflow tank)

Preparation of drawings, documentation and liasoning for getting proposed approval from joint chief controller of explosives, chennai including traveling, boarding and lodging, out of pocket expenses, (necessary statutory fees will be paid by client online).

Preparation of drawings, documentation and liasoning with local District Authority with different departments for obtaining NOC from District authority with necessary challans.

Preparation of drawings, documentation and liasoning for getting final license from joint chief controller of explosives, chennai including travelling, boarding and lodging, out of pocket expenses, 126 certificate for tank testing & 130 certificate for safety certificate under petroleum rules 2002 issued by the competent authority person. (necessary statutory fees will be paid by client online).

Preparation of drawings, documentation and including travelling, boarding and lodging, out of pocket expenses certificate issued by the competent authority. (necessary statutory fees will be paid by client online).Airport Authority of India (N.O.C) certificate.

Wiring with 2x1.5sqmm [22/0.3] PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with modular metal box and 6A F.T Modular switch with front cover plate in flush with wall with making good of the concealed portion with suitable colour for PVC concealed modular light point / fan point [For electronic regulator] [Modular metal flush box, Modular switch, Cover plates should be [Higher End Crabtree / legrend / Hager / Equivalent] [5points per coil]

Wiring with 2x1.5sqmm [22/0.3] PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with modular metal switch box and 6A F.T Modular switch with modular 3 pin wall socket with front cover plate and continuous of 14 SWG TC wire and making good of the concealed portion with suitable colour for PVC concealed modular 6A plug point [Modular metal flush box, Modular switch, Cover plates should be Legrand Arteors / Equivalent]

Supply and fixing of single box type 20W LED fitting (Higher End Philips/Havells make) with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 48W LED street light fitting complete (Higher End Philips/Havells/Equivalent) complete with 32mm dia GI pipe (Class 'B') with 1 No. 32mm GI Bend complete on the existing post / wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads MS clamps and aluminum painting

Supply and fixing of 1200 mm [48"] AC High speed ceiling fan [crompton make] complete with stepped electronic 100W regulator with Box type fan clamp.[Modular Regulator , Cover plates should be [Higher End Crabtree / legrend / Hager / Equivalent]

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with double door (Metal) 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark ( make: Legrand/Hager/equivalent)

Supply and run of 2 of 4sqmm [56/0.3] PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour .

Supply and fixing of brass cable gland for 3½ x 120 sqmm PVC armoured LTUG cable with earth connection

Supply and laying of 3 ½ x 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 3 ½ x 120 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps

Supply and providing cable end termination of 3 ½ x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

500 KVA DG set 415V Diesel Engine Supply and installation, testing and commissioning of 400KW/500 KVA, 0.8PF, 415V Prime power rated D.G. Set with acoustic enclosure, with KG- 1500 Engine controller with DG syn. facility , complete with all accessories like engine, alternator, batteries with leads, base frame, anti vibration mounts, residential silencer, in built 990 liters fuel oil tank, exhaust piping with lagging inside the D.G. set and up to terrace, fuel oil motor operated pump, other misc. accessories for the total set including test trial run (inclusive of consumable oil, etc) control wiring, annunciation, etc. as per specifications. ( AS PER CPCB NORMS) .Engine: It shall be meant for continuous duty 10 cylinder, 1500 rpm, 4 stroke coupled to alternator meant for delivering electric power. The engine shall be radiator cooled, high tensile strength steel forged crank shaft, induction hardened bearings, alloy cast iron removable wet liner cylinder block, corrosion resistant cylinder heads with supply and return lines and valves, crank shaft actuated injectors with integral fly ball type governor for fuel system, forced feed gear type pump for lubrication, aluminium alloy ring carrier piston with provision for thermal expansion, exhaust gas driven turbo charger for fuel economy and low smoke and noise, heat and corrosion.............

resistant intake and exhaust valves, etc. It shall also be fitted with standard components like breather crankcase, air filter, coolant filter, blower type fan with shrouding, filters (lubricating oil full flow paper element type or equivalent), by pass filter, fuel filter (replaceable type paper element or equivalent), Electronic governor, central sump, panel instruments provided with ammeter, mechanical hour meter, water temperature gauge, lubricating oil temperature gauge, lubricating oil pressure gauge, starting switch, belt driven centrifugal coolant pump, supports to engine from base frame with pedestal type support in the front and rear, double drive adopter over speed stop, residential silencer, spider type flexible coupling, complete painting, lub oil measuring lever, base frame with antivibration mounts, valves for inlet and outlet piping, 24 volts batteries, battery supporting wooden stand, etc. Alternator: 500 KVA rated for continuous duty Brushless, self excited, totally enclosed, IP 22/23 enclosure, class H/H insulation with regulation of plus or minus of 5%, terminal box suitable for non-segregated busduct made out of solid tinned aluminium conductor / multi run of cables as per BOQ(Cables & Terminations covered separately), terminal voltage 415 volts 50 Hz, 3 phase 4 wire system, solid state high speed automatic voltage regulator, 2 Nos. bolting type grouting terminals, suitable mounting arrangements and coupling with the base frame and engine, etc.

Design, supply, testing and commissioning of Auto start and Auto syn panel with auto load sharing arrangement of Indoor, cubicle type floor mounting panel made out of MS sheet enclosure with Aluminium busbars, single busbar system, construction with IP42, cable chamber, interconnection, painting, earthing, protection relays etc. comprising of the following : (DG AMF with auto Synchronising control Panel). INCOMING'1 No. 800Amps, TP, 50KA , ACB EDO type with UV coil, shunt release, shutter assembly with 250A 4 pole neutral isolating contactor with all other necessary accessories. Instrumental compartment 'Providing TNC switch, emergency lockable push button, Multi load manager, Energy meter, Voltmeter, Instantaneous over current, earthfault relay (2 O/C+ 1 E/F), Restricted earth fault relay, Standby earth fault relay, Under voltage relay, Over voltage relay, Reverse directional power relay, Differential protective relay, Under frequency relay, Over frequency relay and Master trip relay, necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs, RYB Indication lamps and “ON/OFF/Trip/Rest" indicating lamp, and emergency lockable push buttons, GCU, Battary charger and also as per the specification and SLD.Both the incomers & out going shall be provided with mechanical & electrical Inetrlocking arrangements. and also should have digital type Ammeter, Voltmeter, indication lamps and necessary CTs, PTs and control MPCB/MCB/ ELCB/RCBOs with all other necessary accessories and also refer the SLD 'Instruments Panel Dual type voltmeter, Dual type frequency meter, Synchronous scope, Synchronising check devise relay, Auto load sharing relay, Voltage balance relay, Current balance relay, Frequency relay with all necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs and as per specification and SLD. OUTGOINGS

All the Outgoing feeder shall be ON/OFF/Trip indication lamps, emergency lockable push buttons, all ACB and MCCBs should have two (spare) potential free contactor for BMS monitoring, Combined digital type Multi function meter (Similar to SOCOMEC - Countis E53) with RS485 port. All ACB feeders should have TNC switch. The rate shall inclusive of necessary CTs, control switches, Front operating handles etc., 'All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing.The board shall be fabricated for future extension of the panel board.The necessary electrical interlocking arrangement between incomer and bus coupler by hardware control wiring along with PLC (Programmable Logic Control). The hardware control wiring for MPCC, AMF Panel, Capacitor Panel, Auto Synchronisation Panel and other necessary control wiring and PLC operation shall be feasible to extend for the panel as per the detailed specification.Each incoming feeders should have inbuilt battery charger for DG sets such as 24Volts, 40Amps,SCR controlled battery charger made up of 16SWG MS sheet enclosure with all accessories having automatic boost and trickle charging arrangements with volt and current limiting circuits, voltmeter for AC/DC supply, ammeter for charging circuit (DC), automatic cut off facility when the Engine alternator is in working condition, MCB for protection, suitable for 230V,50Hz, AC supply, interconnections, body earthing etc. complete as required.The panel should have the provision to receive the pipe lines for proposed panel gas flooding system.3200Amps 4P Aluminium busbars:- All the neutral busbars shall have the same capacity of phase busbars.

supply, installation, testing and commissioning of 150 MM dia4.5 MM Thick MS exhaust pipe B Class with all accessories such as bends,.flanges, gaskets, for 500 KVA DG set

Supply & Installation of Thermal insulation with 50mm thick glass wool, chicken mesh and aluminium sheeet thickness of 24 SWG cladding for 150 MM dia exhuast pipe , complete as per the specifications etc. as required.

Supply, installation, testing and commissioning of 250 MM dia4.5 MM Thick MS exhaust pipe B Class with all accessories such as bends,.flanges, gaskets, for 500 KVA DG set

Supply & Installation of Thermal insulation with 50mm thick glass wool, chicken mesh and aluminium sheeet thickness of 24 SWG cladding for 250 MM dia exhuast pipe , complete as per the specifications etc. as required.

Supply & Installation of Thermal insulation for silencer with the thickness of 50 mm thick glass wool of , chicken mesh and aluminium sheeet thickness of 24 SWG cladding complete as per the specifications etc. as required.

Supply & installationof M.S. supports for the 12 Mtrs exhaust strcuter & horiziontal , silencer supports

Supply and installation of 990 Ltrs fuel buffer tank made of 3 mm thick with 450 x 450 mm man hole ,vent pipe , filling and drain provision , mechnical glass tuber level indicator , high ,low level sensing level switch

Supply and laying of 40 mm dia C class fuel header line for the fuel tank with ncessary flanges, bends and fastners , one coat primer and two coat golden brown epoxy painting .

Supply and laying of 25 mm dia C class fuel line from the header line to inbuilt fuel tank with ncessary flanges, bends and fastners , one coat primer and two coat golden brown epoxy painting .

Supply and fixing of 40 mm dia ball valve with necessary flanges for header line

Supply and fixing of 25 mm dia ball valve with necessary flanges for sub line

Supply and fixing of 400 mm dia ss below with matching flanges

Supply and fixing of 250 mm dia ss below with matching flanges

Supply and fixing of brass cable gland for 3½ x 400 sqmm PVC armoured LTUG cable with earth connection.

Supply and laying of 3 ½ x 400sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 3 ½ x 400 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and providing cable end termination of 3½ x 400 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Earthing as per the ISI specification with an earth electrode of class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 600mm x 600mm x 3mm base plate duly welded at the bottom of the GI pipe and 300mm x 300mm x3mm copper flat of length 2.25mtrs is fixed from bottom base plate to top earth link parallel to GI pipe with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 60mm x 10mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and run of 50mm x 10mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and run of 50mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

device,Push button-orange LED illumination, Full car operating panel, Dot matrix led D &P indicators In car & landings - Orange colour, Provision for access card system, Floor annuciator, Firemans switch, safe landing operation, Next landing opration, Bms compatibility - Potential free 4 contacts only, Advance door opening, false ceiling in car, Fire rating of landings doors - Two hours, Infra red door screen, Overload warning indicator, Scaffolding - Metal, 3Way intercom, Press and speak phone, Free service for one year, Pit ladder, Ss Handrail, Sill Support, Lift out of order box (English & local language) ,lift licenmse, Minor builders work, Landing push box on wall, Stainless steel braille button with S.S.Cover, Provision for CCTV Camera - IP(Cat6 flat travelling cable) VII.Automatic Rescue Device ( ARD ) : To facilitate landing of lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories. VIII. MINOR BUILDER WORK : To be Provided by the lift Contractor IX. SCAFFOLDING WORKS : To be Provided by the lift ContractorX.STAINLESS STEEL ANGLES AND FACIA PLATES: To be Provided by the lift Contractor XI. OTHER INCLUSIONS : Over speed Governor, phase failure and phase reversal relay, alarm bell, T. Guide brackets for car and counter weights, rubber padding under winding unit, Motor of adequate required capacity, single reduction Gearless Permanent Magnet Synchronised Motor. , electro magnetic brake with compression springs, car safety device, buffer, electro mechanical door locks, tubular S.S hand rail in car. Architraves covering all the 3 sides of the entrance door with 3mm thick decolam sheet with cardboard upto a height of 1.5 mtrs from the sil level. Supply of operation and maintenance manual with necessary tools for operation. The list of tools required should be detailed by the contractor in a separate format should duly signed by the contractor. XiI. FREE SERVICE AND MAINTENANCE DURING THE GUARANTEE PERIOD OF ONE YEAR. a. Guarantee : Guarantee for materials and workmanship of equipment not less than one year. Free maintenance : Free prehensive, servicing and maintenance during the guarantee period to be provided by the Lift ontractor. And important necessary training to employees for minor maintenance works and proper handing over of lift to be done by the lift contractor. c.Preparation of Drawings and obtaining CEIG's Safety Certificate for lift approval as per lift act with payment of necessary fees to CEIG and insurance policies, if any. d. Site tests in accordance with IS 14665 shall be carried out at the time of handing over. (Make : Johnson / OTIS / KONE ) Infrared door sensors, Emergency key, motor over load protection devices, final limit switch, position and direction indicators for car and landing entrance, main suspension ropes, counter weights, lifting joists for mounting the machines, S.S. fcial plate for car operating panel & landing fixtures, fireman’s switch and other necessary control – complete set.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box inflush with wall with 3mm thick hylum sheet cover for 5A 3pin non interlocking flush type CS plug with painting of suitable colour with continuous earthwire connection of 14SWG TC wire for open plug point.

Supply and fixing of single box type 4’20W LED fitting with TW round blocks on wall or ceiling with 4’20W LED tube with PVC unsheathed Copper leads from terminals to the fitting. (Make : Philips/Havells/Equivalent)

Supply and fixing of WT bulk head fitting with guard suitable for 9W LED bulb.

Supply and fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of M.S / Fiber louvers shutters arrangements for 450 mm (18") sweep heavy duty AC Exhaust fan.

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

Supply and fixing of vertical type 4 way triple pole MCB DB with metal door cover with IP 42 protection in sheet steel enclosure with 1No. 63A 4 pole MCB as incoming 1No. 32A TP MCB and 9Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be with the ISI mark

Supply and clamping of 31/2 x 35 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 31/2 x 35 sq.mm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 1/2 x 35 sq. mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Design, supply, erection, testing and handing over of High Mast structure make or equivalent with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, pulley drive, stainless steel wire rope single /double drum self- lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast. a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set. b) High powered power tool complete with hand held contorl panel and motor with push button type remote control switch suitable for 3 phase 415V 50HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch -1set. c) Feeder pillar box comprising 0.90 m x 0.45m x 1.20m floor AI frame with 63A TPN main switch 1no ,63A fuse unit 3 nos, 63A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor - 1set. d) Neon aviation obstruction light (Bajaj BJAOL (2) / equivalent - 1no

e) 2Nos of special GI earth electrodes with copper plate 300 x 300 x 3mm and copper flat (1" x 1/4") interconnection as per ISS complete with earth connection - 1set. f) Hot dip galvanized lightening arrestor - 1No g) Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with 150 Watts LED Light fitting Crompton/ philips make or Equivalent with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc, complete as per standard specification. - 8 Nos

Supply and fixing of 4way metal box enclosure with 32 A FP MCB in flush with wall and making good of the concealed portion with earth connection.

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 4x16sq.mm PVC armoured LTUG cable through 32mm (1¼”) dia GI pipe in a trench to be excavated at a depth of 0.75 meter putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good by road crossing.

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 16 sq.mm PVC LTUG armoured cable with earth connection.

Supply and providing cable end termination of 4 x 16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour.

Supply and fixing of 10 A to 32 A DP MCB in 2 way sheet steel enclosure in flush with wall and making good of the concealed portion and earth connection. (Make:MDS Legrand/Hager(L&T) /Equivalent).

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 2 x 6 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of BAMBOO LED BOLLARD New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source with PVC unsheathed copper leads from the terminals to the fitting

Supply and fixing of 3Mtr Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish.Compatible for all Havells post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole. Decorative sleek casting ring to increase aesthetical appeal with 50W CORAL LED POST TOP (Model No.CORALMAXIPT50WLED830PSYMTOPC)New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications.

Supply, erection, testing and commissioning of Three phase automatic street light controller of outdoor type housed in suitable size power coated enclourse made of sheet steel accommodating the following with necessary internal wiring with 10Sq.mm Unsheathed Copper wire. a) 63A four pole MCB=1 No (I/C) b) 32A Four pole MCB=4 Nos (O/g) c) 24 Hrs Time switch (Timer) with Batter backup= 1 No d) 40A Three phase contactor with 230v coil =1No (MCB’s & Timer: Legrand/equivalent contactor L & T /Siemens/BCH the metal danger board shall be fixed at approximate location on suitable pedestal

CMK Projects Private Ltd.,