Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹32.9 L+₹53,908 (1.67%)Rejected-Finance PR CDA SC PUNE 01 THROUGH AO GE DEHU ROAD | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹33.4 L+₹1.1 L (3.42%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹34.1 L+₹1.7 L (5.39%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹34.4 L+₹2.0 L (6.27%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE dehu road
GE dehu road
REPAIR / MAINTENANCE TO JOINERY/ ALUMINIUM WORKS ,ROLING SHUTTER IRON GATE AND ALLIED WORKS IN GARDEN CITY, COD ROAD AND DEMPSY ROAD MD ACCN UNDER AGE B/R (EAST) AT GE DEHU ROAD.
2023_MES_626848_2
8812
Open Tender
Civil Works
Item Rate
270 days
GE dehu road
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE dehu road
₹92,000
24 May 2024
20 Nov 2023
13 Dec 2023
20 Nov 2023
11 Dec 2023
27 Nov 2023
Amount
Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. complete all as specified and directed.
Ditto as above item no 1 but n'exc 1.5 Sqm each. complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.
Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. complete all as specified and directed.
S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified and directed.
M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.Make: Gyproc or Equivalent
M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.
Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407
Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 30 mm thick factory made solid panel PVC door shutter ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. Complete all as specified and as directed.
S & F for 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.
S & F 35 mm thick factory made glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed.
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified and as directed.
S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, (three Track) fixed type without sash bar, aluminium section weight not less 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and as directed.
M & L in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.
S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples complete all as specified and directed.
S&F 3.0 mm thick sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.Complete all as specified and as directed.
S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.
S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.
S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and as directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and as directed.
S&F 100 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete all as specified and as directed.
S&F 125 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete all as specified and as directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.
Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.
M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 on old fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.
M&L for rendering 15 mm thick in CM 1:6 on new fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.
M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. all as specified and as directed by Engr-in-charge
M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls. all as specified and as directed by Engr-in-charge
Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level) complete all as specified and directed.
M & L 75 mm thk Cement concrete (1:3:6) type C-2, (40 mm gr agg) as in plinth protection finished even and fair complete all as specified and as directed.
M & L 75 mm thick PCC type D2 1:4:8 (40 mm Gr. Agg ) as in sub base complete all as specified.and as directed.
M&L for 55 mm to 60 mm thick, laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of M-35 Grade over 50mm thick sand layer watering and ramming complete all as specified and directed.
M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm thick set and jointed in cement slurry and pointed in neat grey cement & reflective coloured over screed bed 15 mm thk in cm 1:6 .complete all as specified and directed.
M&L 20-25mm thick machine cut kota stone slab flooring over and including cement screed bed 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete all as specified and directed.
M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and as directed.
M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in floor,finished rough to receive tiles etc,complete all as specified.
M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.
Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, rounding to edges of granite stone etc.complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as specified and directed.
M&L for 25 mm thick plain cement concrete (1:2:4) type B-1 using (20 mm graded stone aggregate) as in Sub base for leveling ,complete all as specified and directed.
M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.
M&L for vitrified coloured / Black tile tiles 8 to 9 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed.
Ditto above item No 48 but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and directed.
M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed.
M&L Non skid ceremic coloured tiles 8 to 9 mm thick (square/rectangular)area of each tile exc. 0.16 sqm but not exc. 0.38 sqm, in floors etc , set and jointed in neat cement sluury and pointed in white or coloured cement to match the coloured tiles over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and as directed.
All as per item No 51 above but on skirtings incl 10 mm th backing coat in CM (1:4) complete all as specified and directed.
M&L for glazed coloured ceramic tiles 300x200x 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 complete all as specified and directed.
Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for .complete all as specified and directed.
S&F Tubular Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and as directed.
M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc. complete all as specified and directed.
S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete all as specified and directed.
All as per item No 58 above above but plain sheet fix in valley gutter / ridge complete all as specified and directed.
M & L for Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas etc, after applying 15mm thick cement plaster in cm (1:4) complete and proper surface prepration, carry out cementitious ingection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete all tools and plant as per manufacturers specification paint complete all as specified and directed by engr-in-charge.
M &L for two coat of synthetic enamel paint over a coat of red oxide primer, including preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.
M & L for plain cement concrete 1:3:6 (using 40 mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.
M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.
S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps complete all as specified and directed.
S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and as directed.
S&F, Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed.
S Y Itkar Construction and Company
H S TAKHI
B.T.DONGARE CONSTRUTION
D J Construction
RAMESH PATIL
Dinesh Constructions
Star Construction
S.R.M.K Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .