Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹8.2 L+₹49,450 (6.38%)Rejected-Finance 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹8.5 L+₹69,840 (9.01%)Rejected-Finance | L3 | Rejected-Finance NOT BEING L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
26 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE KARGIL
OFFICE OF THE GE KARGIL LADAKH
PERIODICAL SERVICES AND MISC B AND R REPAIR REPLACEMENT WORKS IN VARIOUS UNIT AT KAKSAR CHHANIGUND HARDAS AND APATI UNDER GE KARGIL
2022_MES_540954_1
GE/K-28/2022-23
Open Tender
Civil Works
Item Rate
180 days
KARGIL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE KARGIL
₹20,000
Yes
28 Sept 2022
28 Jul 2022
29 Aug 2022
28 Jul 2022
26 Aug 2022
12 Aug 2022
Amount
Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.
Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15 mm thick in cement mortar 1:6 on brick or concrete surfaces, finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises., complete all as specified and directed by Engr-in-Charge.
M & L Non-skid coloured tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:6, over 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough
M & L for Glazed ceramic coloured tiles of size 300x200x7 mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.
S & F 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing fixed with nails to timber frame work on ceiling complete all as specified and directed.
Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.
S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.
M&L for 2nd class softwood Moulding as in cornices, picture rails and the like n.exc 6 Sqcm complete all as specified and directed.
Prepration of old plastered or unplastered surfaces of walls and applying one coat of approved shade of oil emulsion distemper, complete all as specified and directed by Engr-in-Charge.
Prepration of old plastered or unplastered surfaces of walls and applying two coat of cement base paint , complete all as specified and directed by Engr-in-Charge.
Prepation of old painted wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.
Preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
Prepation of new plastered or unplastered surfaces of walls and applying two coats of Cement base paint , complete all as specified and directed by Engr-in-Charge.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitining complete all as specified and directed by Engr-in-Charge.
Dismantling PVC water tanks of capacity exc 500 but n exc 1000 ltr and removing to store complete all as specified and directed.
S & F 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos 25 mm dia tank nipple and 1 No 32 mm dia drain plug all as specified in SSR Part I complete all as specified and directed.
Dismantling PVC water tanks of capacity exc 250 but n exc 500 ltr and removing to store complete all as specified and directed.
S & F 500 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 2 Nos 25 mm dia tank nipple and 1 No 32 mm dia drain plug all as specified in SSR Part I complete all as specified and directed.
Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 15mm bore, complete all as specified and directed by Engr-in-Charge.
Supply and fixing 15mm dia GI tube medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.
S & F stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).
S & F in repairs vitreous china wash basin white ,flat,flate back size 630x450 mm excluding taps,waste pipe,chain and plug and procelain stopper but including brackets complete all as specified and directed.
S&F in repairs Bib taps15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixed in repair, complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description exc 1 sqm but n exc 2 Sqm m each
S & F second class hard wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.
M & L preparation of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S & F butt hinges medium weight cold rolled mild steel of 100mm long
S & F aluminium alloy, anodised sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long.
S&F Aluminum Anodised barrel tower bolts of extruded section, 150mm long.
S & F anodised aluminium handle, cast type anodised section 150mm size.
S&F in repair towel rail 600mm long of PTMT fixed with and including chromium pated brass screws
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M & L for 75mm thick, plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.
Note : Deduction for amount of Rs 15,785.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.
M/S ALI MOHD AND SONS
M/S ABASS ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .