PROVN OF TWO BICYCLES SHED AT THIMAYYA BN IN IMA DEHRADUN ADDN ALTN TO GARAGE BLDG NO EW 147 AND EW 148 AT MT SEC, ADDN / ALTN TO P- 108 AROGYAM BLDG FOR PROVN OF ONE WAITING ROOM AND RAMP AT IMA DEHRADUN

Amount

Surface excavation n.exc 30 Cm deep and averaging 15 Cm deep and getting out in any type of soil, Complete all as specified.

Excavation in post holes (or similar holes) each n. exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 Cm complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exc 1.5m depth in foundation etc or for shafts, well cesspit, man holes, pier holes, laying pipes etc. Not exc 1.5m in depth and getting out in any type soil, including trimming the sides and bottom, slopes etc complete all as specified and directed.

Rough excavation not exc 1.5m deep in soft/loose soil , getting out and removing of excavated soil exc 500m but n. exc 1.0 Km and depositing where directed.

Spreading and levelling in layers n. exc 20 Cm thick including ramming & watering as required, complete all as specified and directed.

M&L for PCC (1:4:8) Type D-2 (using 40mm graded crushed stone aggregate) as in sub base, foundation, filling and mass concrete, complete all as specified.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m span, cills, steps, seismic bands, coping including formwork complete all as specified & directed.

M & L for PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate ) in foundation for post holes, filling & mass concrete.

M&L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc 6.00m mean radius with old size bricks complete all as specified & directed.

M&L for 15mm thick rendering on walls in cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement all as specified & directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified & directed.

Removing excavated material (soil) n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified & directed.

S & F MS Plates (plain or chequered), square cut or notched (ordinary and countersunk) forming holes with riveted, bolted or welded attachment Fe-290 Gde E-165.Complete all as specified.

S & F MS hollow pipe as in roof trusses (framed), trussed,purlins, crane gantries, rails, column and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165, complete all as specified and directed

S&F MS angle/Tee/Hollow tubular section as in column, main or cross beams, hip and jack rafter, purlins where connected to common rafters and etc conforming to Fe-290 Gde E-165 all as directed.

S&F 11 to 15mm dia mild steel screw bolts machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed ends to be fitted with washers & one hexagonal or square nut, n.exc 5Cm long.Complete all as specified.

S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed .

M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc 15 Cm thick watered & rammed to a true surface.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in sub base complete finished fair & even all as specified & directed.

M&L for 100mm thick PCC (1:2:4) type B-2 (using 40mm graded crushed stone agg) as in floor and finished top surface even & smooth with using extra cement and spike rolling to surface or making impression of expanded metal complete all as specified & directed.

Preparation of new/previously untreated surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for two coat of cement based paint (snowcem) on new or previously untreated wall surfaces including preparation of surfaces complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in plinth protection complete finished fair & even incl joint filled with mixer of sand and hot bitumen in the ratio of (1:1). all as specified & directed.

Supply only 4.0mm thick plain cement sheet 100mm wide placed vertically at joint of cement concrete floor panel of size 2.0m x 2.0m complete all as directed.

Rolling and consolidating, formation surfaces (in cutting) with 0.2 to 0.5 ton hand roller omplete to reqd level, gradient, slopes, camber and super elevation including approved earth which may occur during rolling process complete all as specified and directed

Providing and laying 80mm thick precast factory made chamfered edge rubberised and polished colored cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete, all as specified and directed. Make- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), Complete all as specified.

M&L for roughening of old concrete surfaces of floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg cement per square metre complete all as specified and directed.

M&L for Ready Mix Cement concrete M-25 (design mix) , using 20mm graded crussed stone aggregates, as in pavement/hard-standing , any thickness, finishing the concrete surface by brooming while concrete is green, complete all as specified & directed. Note: - (a) Ready mix concrete shall be brought from approved cement concrete plant. (a) Ready mix concrete shall be tested in NABL approved Lab before placing at site and cost thereof shall be born by the contractor.

M & L for forming construction joints by cutting grooves 30mm deep and 10 mm wide filled with sealing compound grade 'A' all as specified and directed.

Dismantling of old brick work in pillars, built in cement mortar including all quoins, arches, pillars etc including provn of steel props with plates for supports of roof trusses, complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L for Brick work with using old bricks obtained from dismantling under item No. 32, straight or curved on plan exc 6.00m mean radius built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

S&F 160mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with PVC clamp including taking down old unserviceable pipe of any description complete all as specified & directed.

M & L for reinforcement concrete pipe class NP-2, laid and jointed complete with collars of 200mm bore, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting of roof covering including ridges, valley gutters etc, of any thickness and description, all complete as specified and directed.

Refixing of old seviceable sheets of any description and any thickness in roofs, water ducts; valley gutter, ridges and funnels etc. cut to required size edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc, complete all as specified & directed. Note :- Rate of scaffolding and other support material deemed to be included in the unit rate.

S&F1.00mm thick Mild steel, plain galvanised sheet in water troughs ducts; valley gutter, ridges and funnels etc. cut to required size edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required in roof valley gutters, complete all as specified & directed. Note :- Rate of scaffolding and other support material deemed to be included in the unit rate.

M&L for Mild steel works as in bands, straps, supports of rain water pipe, valley gutter including bolts, hold fast, wind ties, angle cleats , hooks, welded grating type bracket and similar small articles etc conforming to Fe-290 Gde E-165 complete all as directed.

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of cement base paint on walls complete all as specified and directed.

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing, including cornices, piller etc. and applying one coat of white wash, complete all as specified and directed.

Preparation of new plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying three coats of white wash on walls complete all as specified and directed.

M&L, for preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L, for preparation of old treated or untreted or new wooden or steel and iron surfaces of any description and any width or girth and treated with tar or coal tar black paintl, complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing opening. Converting window into door openings, etc or cutting out defective brick work for under-pinning including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc to store and rubbish not exc. 50m. all as specified & directed.

Forming jambs, etc to openings (to foregoing item) including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete, all as specified & directed.

Making good under cills or over arches, lintels and bres-cummers. Including all-pinning when necessary all as specified & directed.

S&F Powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directed.

S&F Aluminium anodised section of any size like angle for jointing cleats etc all complete as specified and directed.

S&F for 5.0mm thick sheet glass, ordinary quality and glazing with rubber gasket and aluminium glazing clips, area in square n exc 0.5 sqm in each pane all as specified & directed. Note: Rubber gasket and glazing clips shall be measured and paid separately.

S&Ffor Neoprene/ EPDM rubber gasket fixing of glasses in aluminium windows / ventilators, all as specified and directed.

S&F Non anodised aluminium rectangular hollow sections of 50.8mmX 25.4mmX 1.16mm thick for wall panelling grid, to be placed at 600mm apart in both vertical and horizontal directions including extra members at corners, junctions, door jamb/ soffits or similar position to be provided as per site requirement. Frame shall be fabricated and installedin position firmly with the help of suitable aluminium cleats and including all necessary screws, rawel plugs clamps etc all as required and directed.

M&L 9mm thick plywood 5ply grade BWR, type BB, fixed with nails to timber frame work as in wall panelling, all as specified & directed.

M&L 4mm thick, 3ply Veneered decorative plywood grade 1 (with BWR resin) with decorative face veeners on one face, fixed with nails to timber frame work, all as specified & directed.

M&L 2nd class hard wood decorative, bullnosed, spalyed, chamfered or rounded on one edge or face.exc 3 & n exc 6 Sqcm fixed with nails all as specified & directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in Cement Mortar (1:4), including dismantling existing tiling or concrete flooring of any description all as specified and directed. complete

S&F 12mm thick toughened glass frameless doors including cutting, polishing and bevelling al around including making holes for fixing of handles, locks and pivots etc, complete all as directed

S&F Floor mounted spring for aluminium door ISI marked including Pivot suitable for toughened glass door shutter exc.2.00sqm each and refixing the shutter in same opening/position after replacing the floor spring complete all as directed.

S&F 300 mm long stainless steel handle fixed to glass door all as specified & directed.

S&F 250 x 8 mm thick U groove PVC false ceiling including grid frame for false ceiling, fixed with 2.5mm dia GI wire suspenders one end tied toroof members and other endconnected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, (size of main tee 36.5 mmX25 mmX 1.4 mm, cross tee 23.5 mm X 26.4 mm X 1.4 mm angle along walls 40 mm X 25 mm X 2.0 mm), all asspecified and directed.

M&L for sand filling under floors including watering & consolidation, compllete all as specified and directed.

Complete removing of existing treatment from wall / ceilling complete all as specified and directed.

Preparation of scrapped or newly plastered surface of wall / ceiling and applying 1.00 to 1.50 mm thick Asian acrylic damp proof wall care putty as per manufacturer instruction complete all as specified and directed.

Preparation of puttyied surfaces of wall/ceiling and applying two coats of oil bound emulsion over a coat of chalk whitening primer using machenical means/Rollers, complete all as directed

M&L, for hollow section stainless steel round/ squre/ rectangular pipe, gde-304, work as in railing, doors or gates or other section with gusset plates, rails, hand rails, braces etc complete, drilled for fixing in marble or concrete with dash fastner or SS screws complete, all as specified & directed.Make- Jindal/Tata/Sail

M&L for Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FR-LSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including PVC conduit concealed / surface PVC casing & caping and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FR-LSH as continuous earth conductor, connected to earth dolly by providing suitable lugs with inner and outer frame plate matching with surrounding with sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets etc complete for the following:- Make of wire : Finolex, Plaza, Havells, Polycab. Make of conduit -Finolex, Ess Ess, KayCL,AKG Note:- (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. (iii) Modular cover plate with frame and sunken steel boxes zinc oxide plated as per site requirements shall be included in quoted rates.

One light point controlled by one, one way Modular switch 6 Amps

One fan/exuast fan point controlled by one, one way Modular switch 6 Amps

One 5 pin 6 Amps switch socket outlet point controlled by one modular switch on the same board.

One 5 pin 6 Amps switch socket outlet point controlled by one Modular switch on independent boad.

Description all as per item No 70.4 here-in-before but point wiring with 2.5 sqmm multistrand copper conductor cable for one five pin modular socket outlet 16 Amps controlled by one modular switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

S&F Modular switch single pole one way 6 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells

S&F Modular socket outlet 2/3 pin combined 6 Amp 240 volts complete all specified and as directedMake:- Anchor/Legrand/ Havells.

S&F Modular switch single pole one way 16 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells.

S&F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all specified and as directed Make:- Anchor/Legrand/ Havells.

S&F Sub main wiring with two single core PVC insulated unsheathed FR-LSH cable 1100 Volt grade, 2.5 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 2.5 Sqmm FR-LSH cable with multi stranded copper conductor as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc and carefully without damaging existing light fittings and connected items complete all specified and as directed. Make of wire : Finolex, Plaza, Havells, Polycab. Make of conduit : Finolex/Ess Ess Kay/ICL/AKG NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface/concealed with using PVC rawl plugs etc.

Supply and fix ceiling fan 1400 mm sweep, 230 volts 5h Hz, energy saving model single phase, copper wound motor, pearl white in colour complete with blade, down rod , canopy and connected with ceiling rose etc complete all as specified and directed. Make:- Bajaj/Crompton/Khaitan

Supply and fix surface and wall mounted LED batten fitting 22 watt 230 volts AC, cool white not less than 1135 mm extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed. Make: Philips/Crompton/Havells/Eveready

M&L for 15mm thick rendering on walls in cement mortar (1:4) on brick or concrete surfaces finished even & smooth without using extra cement all as specified & directed.

Supply and fix Aesthetically designed, 2' x 2' cool white/warm white flat panel for suitable for armstrong/grid ceiling which provide soft-light and glare free symmetrical illumination of fixture size 595x595x70 mm with and including 42 W LED complete, integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to ceiling including taking down existing fitting and carefully without damaging existing light fittings and connected items complete all as specified and directed. Make:- Philips/Crompton/Havells/Eveready

Sanjay Enterprises

M/S S P BUILDERS

Aggrawal Builders and Furnishers

Anil Kumar Gupta